From cbb1adb5e08241c4fd4212846c1510cd5069fb07 Mon Sep 17 00:00:00 2001 From: teoteo Date: Wed, 30 Oct 2024 09:42:13 +0100 Subject: [PATCH] Update VAOC.md typo? Based on ratos-variables.cfg I think it is a typo --- site/docs/VAOC.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/site/docs/VAOC.md b/site/docs/VAOC.md index f1238fc3b..254460031 100644 --- a/site/docs/VAOC.md +++ b/site/docs/VAOC.md @@ -160,7 +160,7 @@ To enter the calibration, press the VAOC button on the left side of the menu. Please allow the system a few seconds to open up the VAOC calibration. Press "Start Calibration on the upper left corner. > [!IMPORTANT] > If you haven't homed the machine, it will home now. -> After it homes or if it already is homed, the machine will go towards the position that is written in `ratos-variables.cfg`, `_xcontrolpoint, _yxcontrolpoint, _zxcontrolpoint` +> After it homes or if it already is homed, the machine will go towards the position that is written in `ratos-variables.cfg`, `_xcontrolpoint, _ycontrolpoint, _zcontrolpoint` When the machine is done moving towards the `ratos-variables.cfg` values, you can now place the VAOC Case as close as to the nozzle center as you can.