Heltec Wireless Shell (V3) format update

Author: Heltec-Aaron-Lee

boards.txt

@@ -21803,7 +21803,7 @@ heltec_wireless_stick_V3.build.bootloader_addr=0x0
 heltec_wireless_stick_V3.build.target=esp32s3
 heltec_wireless_stick_V3.build.mcu=esp32s3
 heltec_wireless_stick_V3.build.core=esp32
-heltec_wireless_stick_V3.build.variant=heltec_wireless_stick_V3
+heltec_wireless_stick_V3.build.variant=heltec_wireless_stick_v3
 heltec_wireless_stick_V3.build.board=HELTEC_WIRELESS_STICK_V3
 
 heltec_wireless_stick_V3.build.usb_mode=1
@@ -21953,7 +21953,7 @@ heltec_wireless_stick_lite_V3.build.bootloader_addr=0x0
 heltec_wireless_stick_lite_V3.build.target=esp32s3
 heltec_wireless_stick_lite_V3.build.mcu=esp32s3
 heltec_wireless_stick_lite_V3.build.core=esp32
-heltec_wireless_stick_lite_V3.build.variant=heltec_wireless_stick_lite_V3
+heltec_wireless_stick_lite_V3.build.variant=heltec_wireless_stick_lite_v3
 heltec_wireless_stick_lite_V3.build.board=HELTEC_WIRELESS_STICK_LITE_V3
 
 heltec_wireless_stick_lite_V3.build.usb_mode=1
@@ -22077,7 +22077,7 @@ heltec_wireless_stick_lite_V3.menu.EraseFlash.all.upload.erase_cmd=-e
 
 ##############################################################
 
-heltec_wireless_shell_V3.name=Heltec Wireless Shell(V3)
+heltec_wireless_shell_V3.name=Heltec Wireless Shell (V3)
 heltec_wireless_shell_V3.vid.0=0x303a
 heltec_wireless_shell_V3.pid.0=0x1001
 
@@ -22103,7 +22103,7 @@ heltec_wireless_shell_V3.build.bootloader_addr=0x0
 heltec_wireless_shell_V3.build.target=esp32s3
 heltec_wireless_shell_V3.build.mcu=esp32s3
 heltec_wireless_shell_V3.build.core=esp32
-heltec_wireless_shell_V3.build.variant=heltec_wireless_shell_V3
+heltec_wireless_shell_V3.build.variant=heltec_wireless_shell_v3
 heltec_wireless_shell_V3.build.board=HELTEC_WIRELESS_SHELL_V3
 
 heltec_wireless_shell_V3.build.usb_mode=1

variants/heltec_wireless_shell_v3/pins_arduino.h

@@ -2,28 +2,26 @@
 #define Pins_Arduino_h
 
 #include <stdint.h>
-#include "soc/soc_caps.h"
+//#include "soc/soc_caps.h"
 
 #define HELTEC_WIRELESS_SHELL_V3 true
+#define DISPLAY_HEIGHT 0
+#define DISPLAY_WIDTH  0
 
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-// Some boards have too low voltage on this pin (board design bug)
-// Use different pin with 3V and connect with 48
-// and change this setup for the chosen pin (for example 38)
-static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+48;
+static const uint8_t LED_BUILTIN = 35;
 #define BUILTIN_LED  LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-#define RGB_BUILTIN LED_BUILTIN
-#define RGB_BRIGHTNESS 64
-
+#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 
-static const uint8_t SDA = 41;
-static const uint8_t SCL = 42;
+//static const uint8_t SDA = 41;
+//static const uint8_t SCL = 42;
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
 
 static const uint8_t SS    = 8;
 static const uint8_t MOSI  = 10;