diff --git a/lib/error_highlight/base.rb b/lib/error_highlight/base.rb
index 81b1b57..1a29ee4 100644
--- a/lib/error_highlight/base.rb
+++ b/lib/error_highlight/base.rb
@@ -62,7 +62,7 @@ def self.spot(obj, **opts)
           # includes "prism" when the ISEQ was compiled with the prism compiler.
           # In this case, we'll try to parse again with prism instead.
           raise unless error.message.include?("prism")
-          prism_find(loc, **opts)
+          prism_find(loc)
         end
 
       Spotter.new(node, **opts).spot
@@ -82,66 +82,16 @@ def self.spot(obj, **opts)
   end
 
   # Accepts a Thread::Backtrace::Location object and returns a Prism::Node
-  # corresponding to the location in the source code.
-  def self.prism_find(loc, point_type: :name, name: nil)
+  # corresponding to the backtrace location in the source code.
+  def self.prism_find(location)
     require "prism"
     return nil if Prism::VERSION < "0.29.0"
 
-    path = loc.absolute_path
-    return unless path
-
-    lineno = loc.lineno
-    column = RubyVM::AbstractSyntaxTree.node_id_for_backtrace_location(loc)
-    tunnel = Prism.parse_file(path).value.tunnel(lineno, column)
-
-    # Prism provides the Prism::Node#tunnel API to find all of the nodes that
-    # correspond to the given line and column in the source code, with the first
-    # node in the list being the top-most node and the last node in the list
-    # being the bottom-most node.
-    tunnel.each_with_index.reverse_each.find do |part, index|
-      case part
-      when Prism::CallNode, Prism::CallOperatorWriteNode, Prism::IndexOperatorWriteNode, Prism::LocalVariableOperatorWriteNode
-        # If we find any of these nodes, we can stop searching as these are the
-        # nodes that triggered the exceptions.
-        break part
-      when Prism::ConstantReadNode, Prism::ConstantPathNode
-        if index != 0 && tunnel[index - 1].is_a?(Prism::ConstantPathOperatorWriteNode)
-          # If we're inside of a constant path operator write node, then this
-          # constant path may be highlighting a couple of different kinds of
-          # parts.
-          if part.name == name
-            # Explicitly turn off Foo::Bar += 1 where Foo and Bar are on
-            # different lines because error highlight expects this to not work.
-            break nil if part.delimiter_loc.end_line != part.name_loc.start_line
-
-            # Otherwise, because we have matched the name we can return this
-            # part.
-            break part
-          end
+    absolute_path = location.absolute_path
+    return unless absolute_path
 
-          # If we haven't matched the name, it's the operator that we're looking
-          # for, and we can return the parent node here.
-          break tunnel[index - 1]
-        elsif part.name == name
-          # If we have matched the name of the constant, then we can return this
-          # inner node as the node that triggered the exception.
-          break part
-        else
-          # If we are at the beginning of the tunnel or we are at the beginning
-          # of a constant lookup chain, then we will return this node.
-          break part if index == 0 || !tunnel[index - 1].is_a?(Prism::ConstantPathNode)
-        end
-      when Prism::LocalVariableReadNode, Prism::ParenthesesNode
-        # If we find any of these nodes, we want to continue searching up the
-        # tree because these nodes cannot trigger the exceptions.
-        false
-      else
-        # If we find a different kind of node that we haven't already handled,
-        # we don't know how to handle it so we'll stop searching and assume this
-        # is not an exception we can decorate.
-        break nil
-      end
-    end
+    node_id = RubyVM::AbstractSyntaxTree.node_id_for_backtrace_location(location)
+    Prism.parse_file(absolute_path).value.breadth_first_search { |node| node.node_id == node_id }
   end
 
   private_class_method :prism_find
@@ -178,31 +128,49 @@ def initialize(node, point_type: :name, name: nil)
     def spot
       return nil unless @node
 
-      if OPT_GETCONSTANT_PATH && @node.type == :COLON2
+      if OPT_GETCONSTANT_PATH
         # In Ruby 3.2 or later, a nested constant access (like `Foo::Bar::Baz`)
         # is compiled to one instruction (opt_getconstant_path).
         # @node points to the node of the whole `Foo::Bar::Baz` even if `Foo`
         # or `Foo::Bar` causes NameError.
         # So we try to spot the sub-node that causes the NameError by using
         # `NameError#name`.
-        subnodes = []
-        node = @node
-        while node.type == :COLON2
-          node2, const = node.children
-          subnodes << node if const == @name
-          node = node2
-        end
-        if node.type == :CONST || node.type == :COLON3
-          if node.children.first == @name
+        case @node.type
+        when :COLON2
+          subnodes = []
+          node = @node
+          while node.type == :COLON2
+            node2, const = node.children
+            subnodes << node if const == @name
+            node = node2
+          end
+          if node.type == :CONST || node.type == :COLON3
+            if node.children.first == @name
+              subnodes << node
+            end
+
+            # If we found only one sub-node whose name is equal to @name, use it
+            return nil if subnodes.size != 1
+            @node = subnodes.first
+          else
+            # Do nothing; opt_getconstant_path is used only when the const base is
+            # NODE_CONST (`Foo`) or NODE_COLON3 (`::Foo`)
+          end
+        when :constant_path_node
+          subnodes = []
+          node = @node
+
+          begin
+            subnodes << node if node.name == @name
+          end while (node = node.parent).is_a?(Prism::ConstantPathNode)
+
+          if node.is_a?(Prism::ConstantReadNode) && node.name == @name
             subnodes << node
           end
 
           # If we found only one sub-node whose name is equal to @name, use it
           return nil if subnodes.size != 1
           @node = subnodes.first
-        else
-          # Do nothing; opt_getconstant_path is used only when the const base is
-          # NODE_CONST (`Foo`) or NODE_COLON3 (`::Foo`)
         end
       end
 
@@ -847,7 +815,11 @@ def prism_spot_constant_path
     #   Foo::Bar += 1
     #      ^^^^^^^^
     def prism_spot_constant_path_operator_write
-      prism_location(@node.binary_operator_loc.chop)
+      if @name == (target = @node.target).name
+        prism_location(target.delimiter_loc.join(target.name_loc))
+      else
+        prism_location(@node.binary_operator_loc.chop)
+      end
     end
   end
 
diff --git a/test/test_error_highlight.rb b/test/test_error_highlight.rb
index 9af530b..5f4c386 100644
--- a/test/test_error_highlight.rb
+++ b/test/test_error_highlight.rb
@@ -5,13 +5,6 @@
 require "tempfile"
 
 class ErrorHighlightTest < Test::Unit::TestCase
-  # We can't revisit instruction sequences to find node ids if the prism
-  # compiler was used instead of the parse.y compiler. In that case, we'll omit
-  # some tests.
-  def self.compiling_with_prism?
-    RubyVM::InstructionSequence.compile("").to_a[4][:parser] == :prism
-  end
-
   class DummyFormatter
     def self.message_for(corrections)
       ""
@@ -876,11 +869,11 @@ def test_COLON2_4
     end
   end
 
-  if ErrorHighlight.const_get(:Spotter).const_get(:OPT_GETCONSTANT_PATH) && !compiling_with_prism?
+  if ErrorHighlight.const_get(:Spotter).const_get(:OPT_GETCONSTANT_PATH)
     def test_COLON2_5
       # Unfortunately, we cannot identify which `NotDefined` caused the NameError
       assert_error_message(NameError, <<~END) do
-uninitialized constant ErrorHighlightTest::NotDefined
+  uninitialized constant ErrorHighlightTest::NotDefined
       END
 
         ErrorHighlightTest::NotDefined::NotDefined
@@ -1342,7 +1335,11 @@ def test_spot_with_backtrace_location
 
   def test_spot_with_node
     omit unless RubyVM::AbstractSyntaxTree.respond_to?(:node_id_for_backtrace_location)
-    omit if ErrorHighlightTest.compiling_with_prism?
+
+    # We can't revisit instruction sequences to find node ids if the prism
+    # compiler was used instead of the parse.y compiler. In that case, we'll
+    # omit some tests.
+    omit if RubyVM::InstructionSequence.compile("").to_a[4][:parser] == :prism
 
     begin
       raise_name_error