This repository was archived by the owner on Oct 5, 2018. It is now read-only.
arm64: topology: adjust log level #48
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
If cpu node don't pass the cpu frequency from DT, then it will report the error log. Now change this log as a warning. Signed-off-by: Leo Yan <leo.yan@linaro.org>
|
merged. |
idlethread
pushed a commit
that referenced
this pull request
Mar 1, 2016
This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
idlethread
pushed a commit
that referenced
this pull request
Apr 21, 2016
commit a38a08d upstream. This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc11 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
idlethread
pushed a commit
that referenced
this pull request
Apr 21, 2016
commit 12e2696 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 7a623c0 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
docularxu
referenced
this pull request
in 96boards-hikey/linux
May 24, 2017
[ Upstream commit ddc665a ] When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
docularxu
referenced
this pull request
in 96boards-hikey/linux
Jun 27, 2017
Commit bf5eb3d ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") made slub sysfs file removals synchronous to kmem_cache shutdown. Unfortunately, this created a possible ABBA deadlock between slab_mutex and sysfs draining mechanism triggering the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-test+ #48 Not tainted ------------------------------------------------------- rmmod/1211 is trying to acquire lock: (s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40 but task is already holding lock: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x75/0x950 mutex_lock_nested+0x1b/0x20 slab_attr_store+0x75/0xd0 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x13c/0x1c0 __vfs_write+0x28/0x120 vfs_write+0xc8/0x1e0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #0 (s_active#120){++++.+}: __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#120); lock(slab_mutex); lock(s_active#120); *** DEADLOCK *** 2 locks held by rmmod/1211: #0: (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80 #1: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 stack backtrace: CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: print_circular_bug+0x1be/0x210 __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 ? SyS_delete_module+0x5/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 It'd be the cleanest to deal with the issue by removing sysfs files without holding slab_mutex before the rest of shutdown; however, given the current code structure, it is pretty difficult to do so. This patch punts sysfs file removal to a work item. Before commit bf5eb3d, the removal was punted to a RCU delayed work item which is executed after release. Now, we're punting to a different work item on shutdown which still maintains the goal removing the sysfs files earlier when destroying kmem_caches. Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3d ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
2 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
If cpu node don't pass the cpu frequency from DT, then it will report
the error log. Now change this log as a warning.
Signed-off-by: Leo Yan leo.yan@linaro.org