RPi-Setup

Automating Raspberry Pi settings

#Problem: Every time I try something new on my Raspberry Pi and something breaks, I have to do clean image install and start over again which is terribly frustrating.

#Solution Automate everything!!!

#Getting ready:

1. Prepare RPi sd card with PiBaker to at least let you ssh into your Pi from home network. You can setup some more automation with it. (Ideas are welcome)

2. Copy settings.txt to USB storage and change it to your settings. I named my USB "PI_SETTINGS" and formated to FAT32

All user-defined settings will be read from /mnt/usb/settings.txt

3. Start RPi and SSH into it

4. Run code:

    sudo apt-get update -y && sudo apt-get dist-upgrade -y && sudo apt-get autoremove -y
   
    Rasbian should have git already installed so this one is optional:
    sudo apt-get install git -y
   

5. Create working folder:

    sudo mkdir scripts
    cd scripts
    sudo git clone https://github.com/CoderFX/RPi-Setup.git
    cd RPi-Setup
    sudo chmod +x start.sh
    sudo ./start.sh
   

#Feel free to contribute!