LIMS-2059: Re-enable reprocess button after any parameter change

[ndg63276]

JIRA ticket: LIMS-2059

Summary:

#1009 introduced a 5s delay after pushing the reprocessing 'submit' button, to prevent accidental double clicks. This seems very long if you want to submit multiple similar jobs, so the button should re-enable if you change something.

Changes:

• Make re-enabling the button it's own function
• Trigger that function after 5s or if any input or select elements are changed
• Do this for normal reprocessing, downstream reprocessing or multicrystal reprocessing

To test:

• Use the live database as otherwise the reprocessing jobs will not exist as zocalo expects and may cause problems. Alternatively, comment out the _enqueue functions in these files.
• Go to a data collection with some automatic processing, eg /dc/visit/mx23694-154/id/21536724
• Click the small cog item to open the "Reprocess Data" window
• Click Integrate, and check the Integrate button is disabled for 5s
• Click Integrate again, and then change a parameter, eg the pipeline or the high res limit, the Integrate button should be enabled again
• Close that window and view an existing Autoprocessing job. Click the "Downstream Processing" button, and then repeat the above tests with the "Submit" button
• Go to the multicrystal reprocessing page /mc/visit/mx23694-154, and click the crossed arrows next to a data collection to select it. Repeat the above tests with the "Integrate" button.

[gfrn]

Nitpick of nitpicks, but even if firing off reprocessing fails, the button is still disabled for 5 seconds. Not that it matters much, don't think anyone will mind.

Happy to approve otherwise!

[ndg63276]

Nitpick of nitpicks, but even if firing off reprocessing fails, the button is still disabled for 5 seconds. Not that it matters much, don't think anyone will mind.

Happy to approve otherwise!

True. But if it does fail, you probably dont want someone hammering the button!