Update 5.10.x+fslc to v5.10.21 #277
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 88eee9b upstream. Now that interface 3 in "option" driver is no longer mapped, add device ID matching it to qmi_wwan. The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20210223183456.6377-1-lech.perczak@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c9062 upstream. There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 056115d upstream. The 0x5F is a new trackpoint report type used by some modules. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071511.32349-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Nikolai Kostrigin <nickel@basealt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea86f3d upstream. We observed that some of virtio_gpu_object_shmem_init() allocations can be rather costly - order 6 - which can be difficult to fulfill under memory pressure conditions. Switch to kvmalloc_array() in virtio_gpu_object_shmem_init() and let the kernel vmalloc the entries array. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20201105014744.1662226-1-senozhatsky@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Doug Horn <doughorn@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb73d07 upstream. This is similar to commit b21ebf2 ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32") but for i386. As far as the kernel is concerned, R_386_PLT32 can be treated the same as R_386_PC32. R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which can only be used by branches. If the referenced symbol is defined externally, a PLT will be used. R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be used by address taking operations and branches. If the referenced symbol is defined externally, a copy relocation/canonical PLT entry will be created in the executable. On x86-64, there is no PIC vs non-PIC PLT distinction and an R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and `call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler. This avoids canonical PLT entries (st_shndx=0, st_value!=0). On i386, there are 2 types of PLTs, PIC and non-PIC. Currently, the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries are possible ABI issues but GCC/GNU as will likely keep the status quo because (1) the ABI is legacy (2) the change will drop a GNU ld diagnostic for non-default visibility ifunc in shared objects. clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler generated function declarations, because preventing canonical PLT entries is weighed over the rare ifunc diagnostic. Further info for the more interested: ClangBuiltLinux#1210 https://sourceware.org/bugzilla/show_bug.cgi?id=27169 llvm/llvm-project@a084c03 [1] [ bp: Massage commit message. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bef198 upstream. syzbot is feeding invalid superblock data to JFS for mount testing. JFS does not check several of the fields -- just assumes that they are good since the JFS_MAGIC and version fields are good. In this case (syzbot reproducer), we have s_l2bsize == 0xda0c, pad == 0xf045, and s_state == 0x50, all of which are invalid IMO. Having s_l2bsize == 0xda0c causes this UBSAN warning: UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25 shift exponent -9716 is negative s_l2bsize can be tested for correctness. pad can be tested for non-0 and punted. s_state can be tested for its valid values and punted. Do those 3 tests and if any of them fails, report the superblock as invalid/corrupt and let fsck handle it. With this patch, chkSuper() says this when JFS_DEBUG is enabled: jfs_mount: Mount Failure: superblock is corrupt! Mount JFS Failure: -22 jfs_mount failed w/return code = -22 The obvious problem with this method is that next week there could be another syzbot test that uses different fields for invalid values, this making this like a game of whack-a-mole. syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193 Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com Reported-by: kernel test robot <lkp@intel.com> # v2 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: jfs-discussion@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b7af29 upstream. The try_invoke_on_locked_down_task() function currently requires that interrupts be enabled, but it is called with interrupts disabled from rcu_print_task_stall(), resulting in an "IRQs not enabled as expected" diagnostic. This commit therefore updates try_invoke_on_locked_down_task() to use raw_spin_lock_irqsave() instead of raw_spin_lock_irq(), thus allowing use from either context. Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/ Link: https://lore.kernel.org/lkml/20200928075729.GC2611@hirez.programming.kicks-ass.net/ Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c0e411 upstream. The dlfb_alloc_urb_list function is called in dlfb_usb_probe function, after that if an error occurs, the dlfb_free_urb_list function need to be called. BUG: memory leak unreferenced object 0xffff88810adde100 (size 32): comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s) hex dump (first 32 bytes): 10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff .0........c..... 00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff .0........:..... backtrace: [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline] [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline] [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline] [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704 [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912 [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936 [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159 [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554 [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738 [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844 [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dec0f4 upstream. prescaler larger than 8 would mean the carrier is at most 152Hz, which does not make sense for IR carriers. Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bde5452 upstream. syzbot generated a crafted bitszbits which can be shifted out-of-bounds[1]. So directly print unsupported blkszbits instead of blksize. [1] https://lore.kernel.org/r/000000000000c72ddd05b9444d2f@google.com Link: https://lore.kernel.org/r/20210120013016.14071-1-hsiangkao@aol.com Reported-by: syzbot+c68f467cd7c45860e8d4@syzkaller.appspotmail.com Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 048c96e upstream. If a menu has more than 64 items, then don't check menu_skip_mask for items 65 and up. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88a9e03 upstream. An assert failure is triggered by syzkaller test due to ATTR_KILL_PRIV is not cleared before xfs_setattr_size. As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size, just remove it from the assert. Signed-off-by: Yumei Huang <yuhuang@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27e9c1d upstream. syzbot reported the following finding: AF_IUCV failed to receive skb, len=0 WARNING: CPU: 0 PID: 522 at net/iucv/af_iucv.c:2039 afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039 CPU: 0 PID: 522 Comm: syz-executor091 Not tainted 5.10.0-rc1-syzkaller-07082-g55027a88ec9f #0 Hardware name: IBM 3906 M04 701 (KVM/Linux) Call Trace: [<00000000b87ea538>] afiucv_hs_rcv+0x178/0x190 net/iucv/af_iucv.c:2039 ([<00000000b87ea534>] afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039) [<00000000b796533e>] __netif_receive_skb_one_core+0x13e/0x188 net/core/dev.c:5315 [<00000000b79653ce>] __netif_receive_skb+0x46/0x1c0 net/core/dev.c:5429 [<00000000b79655fe>] netif_receive_skb_internal+0xb6/0x220 net/core/dev.c:5534 [<00000000b796ac3a>] netif_receive_skb+0x42/0x318 net/core/dev.c:5593 [<00000000b6fd45f4>] tun_rx_batched.isra.0+0x6fc/0x860 drivers/net/tun.c:1485 [<00000000b6fddc4e>] tun_get_user+0x1c26/0x27f0 drivers/net/tun.c:1939 [<00000000b6fe0f00>] tun_chr_write_iter+0x158/0x248 drivers/net/tun.c:1968 [<00000000b4f22bfa>] call_write_iter include/linux/fs.h:1887 [inline] [<00000000b4f22bfa>] new_sync_write+0x442/0x648 fs/read_write.c:518 [<00000000b4f238fe>] vfs_write.part.0+0x36e/0x5d8 fs/read_write.c:605 [<00000000b4f2984e>] vfs_write+0x10e/0x148 fs/read_write.c:615 [<00000000b4f29d0e>] ksys_write+0x166/0x290 fs/read_write.c:658 [<00000000b8dc4ab4>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415 Last Breaking-Event-Address: [<00000000b8dc64d4>] __s390_indirect_jump_r14+0x0/0xc Malformed RX packets shouldn't generate any warnings because debugging info already flows to dropmon via the kfree_skb(). Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ef4c19 upstream. syzbot found WARNINGs in several smackfs write operations where bytes count is passed to memdup_user_nul which exceeds GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE. Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO, smk_write_net6addr accepts any label or -DELETE. I couldn't find any general rule for other label lengths except SMK_LABELLEN, SMK_LONGLABEL, SMK_CIPSOMAX which are documented. Let's constrain, in general, smackfs label lengths for PAGE_SIZE. Although fuzzer crashes write to smackfs/netlabel on 0x400000 length. Here is a quick way to reproduce the WARNING: python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5797e86 upstream. syzbot is reporting that tomoyo's quota check is racy [1]. But this check is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore this data race. [1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476 Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 097b914 upstream. Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when cloning an skb, save and restore truesize after pskb_expand_head(). This can occur if the allocator decides to service an allocation of the same size differently (e.g. use a different size class, or pass the allocation on to KFENCE). Because truesize is used for bookkeeping (such as sk_wmem_queued), a modified truesize of a cloned skb may result in corrupt bookkeeping and relevant warnings (such as in sk_stream_kill_queues()). Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f02de4 upstream. At early boot stage, we have a whole PGDIR to map the kernel, so there is no need to restrict the early mapping size to 128MB. Removing this define also allows us to simplify some compile time logic. This fixes large kernel mappings with a size greater than 128MB, as it is the case for syzbot kernels whose size was just ~130MB. Note that on rv64, for now, we are then limited to PGDIR size for early mapping as we can't use PGD mappings (see [1]). That should be enough given the relative small size of syzbot kernels compared to PGDIR_SIZE which is 1GB. [1] https://lore.kernel.org/lkml/20200603153608.30056-1-alex@ghiti.fr/ Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9a2f90 upstream. There exists a race where we can be attempting to create a new nbd configuration while a previous configuration is going down, both configured with DESTROY_ON_DISCONNECT. Normally devices all have a reference of 1, as they won't be cleaned up until the module is torn down. However with DESTROY_ON_DISCONNECT we'll make sure that there is only 1 reference (generally) on the device for the config itself, and then once the config is dropped, the device is torn down. The race that exists looks like this TASK1 TASK2 nbd_genl_connect() idr_find() refcount_inc_not_zero(nbd) * count is 2 here ^^ nbd_config_put() nbd_put(nbd) (count is 1) setup new config check DESTROY_ON_DISCONNECT put_dev = true if (put_dev) nbd_put(nbd) * free'd here ^^ In nbd_genl_connect() we assume that the nbd ref count will be 2, however clearly that won't be true if the nbd device had been setup as DESTROY_ON_DISCONNECT with its prior configuration. Fix this by getting rid of the runtime flag to check if we need to mess with the nbd device refcount, and use the device NBD_DESTROY_ON_DISCONNECT flag to check if we need to adjust the ref counts. This was reported by syzkaller with the following kasan dump BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] BUG: KASAN: use-after-free in refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76 Read of size 4 at addr ffff888143bf71a0 by task systemd-udevd/8451 CPU: 0 PID: 8451 Comm: systemd-udevd Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:230 __kasan_report mm/kasan/report.c:396 [inline] kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76 refcount_dec_and_mutex_lock+0x19/0x140 lib/refcount.c:115 nbd_put drivers/block/nbd.c:248 [inline] nbd_release+0x116/0x190 drivers/block/nbd.c:1508 __blkdev_put+0x548/0x800 fs/block_dev.c:1579 blkdev_put+0x92/0x570 fs/block_dev.c:1632 blkdev_close+0x8c/0xb0 fs/block_dev.c:1640 __fput+0x283/0x920 fs/file_table.c:280 task_work_run+0xdd/0x190 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc1e92b5270 Code: 73 01 c3 48 8b 0d 38 7d 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c1 20 00 00 75 10 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 RSP: 002b:00007ffe8beb2d18 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1e92b5270 RDX: 000000000aba9500 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fc1ea16f710 R08: 000000000000004a R09: 0000000000000008 R10: 0000562f8cb0b2a8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000562f8cb0afd0 R14: 0000000000000003 R15: 000000000000000e Allocated by task 1: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:401 [inline] ____kasan_kmalloc.constprop.0+0x82/0xa0 mm/kasan/common.c:429 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:682 [inline] nbd_dev_add+0x44/0x8e0 drivers/block/nbd.c:1673 nbd_init+0x250/0x271 drivers/block/nbd.c:2394 do_one_initcall+0x103/0x650 init/main.c:1223 do_initcall_level init/main.c:1296 [inline] do_initcalls init/main.c:1312 [inline] do_basic_setup init/main.c:1332 [inline] kernel_init_freeable+0x605/0x689 init/main.c:1533 kernel_init+0xd/0x1b8 init/main.c:1421 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Freed by task 8451: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38 kasan_set_track+0x1c/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:356 ____kasan_slab_free+0xe1/0x110 mm/kasan/common.c:362 kasan_slab_free include/linux/kasan.h:192 [inline] slab_free_hook mm/slub.c:1547 [inline] slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1580 slab_free mm/slub.c:3143 [inline] kfree+0xdb/0x3b0 mm/slub.c:4139 nbd_dev_remove drivers/block/nbd.c:243 [inline] nbd_put.part.0+0x180/0x1d0 drivers/block/nbd.c:251 nbd_put drivers/block/nbd.c:295 [inline] nbd_config_put+0x6dd/0x8c0 drivers/block/nbd.c:1242 nbd_release+0x103/0x190 drivers/block/nbd.c:1507 __blkdev_put+0x548/0x800 fs/block_dev.c:1579 blkdev_put+0x92/0x570 fs/block_dev.c:1632 blkdev_close+0x8c/0xb0 fs/block_dev.c:1640 __fput+0x283/0x920 fs/file_table.c:280 task_work_run+0xdd/0x190 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888143bf7000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 416 bytes inside of 1024-byte region [ffff888143bf7000, ffff888143bf7400) The buggy address belongs to the page: page:000000005238f4ce refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x143bf0 head:000000005238f4ce order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head) raw: 057ff00000010200 ffffea00004b1400 0000000300000003 ffff888010c41140 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888143bf7080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888143bf7100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888143bf7180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888143bf7200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Reported-and-tested-by: syzbot+429d3f82d757c211bff3@syzkaller.appspotmail.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1ba9da upstream. The current code would unnecessarily expand the address range. Consider one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) = (1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M) without expand. But the current result will be (1G-4M, 3G+4M). Actually, the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd sharing. After this patch, we will check that the vma span at least one PUD aligned size and the start,end range overlap the aligned range of vma. With above example, the aligned vma range is (1G, 3G), so if (start, end) range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to both start and end. Otherwise, we will have chance to adjust start downwards or end upwards without exceeding (vm_start, vm_end). Mike: : The 'adjusted range' is used for calls to mmu notifiers and cache(tlb) : flushing. Since the current code unnecessarily expands the range in some : cases, more entries than necessary would be flushed. This would/could : result in performance degradation. However, this is highly dependent on : the user runtime. Is there a combination of vma layout and calls to : actually hit this issue? If the issue is hit, will those entries : unnecessarily flushed be used again and need to be unnecessarily reloaded? Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com Fixes: 75802ca ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b38041d upstream. For HB, there is no need to generate signal for completion. Also remove a comment accordingly. Fixes: c0894b3 ("RDMA/rtrs: core: lib functions shared between client and server modules") Link: https://lore.kernel.org/r/20201217141915.56989-16-jinpu.wang@cloud.ionos.com Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reported-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aaed465 upstream. We may want to add new flags, so it's better to use bitmask to check flags. Fixes: 6a98d71 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20201217141915.56989-17-jinpu.wang@cloud.ionos.com Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8ae7dd upstream. We do not need to wait for REG_MR completion, so remove the SIGNAL flag. Fixes: 9cb8374 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20201217141915.56989-18-jinpu.wang@cloud.ionos.com Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d1be91 upstream. tcp_rmem[1] has been changed to 131072, we should update the documentation to reflect this. Fixes: a337531 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Zhibin Liu <zhibinliu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52557db upstream. MPJ subflows are not exposed as fds to user spaces. As such, incoming MPJ subflows are removed from the accept queue by tcp_check_req()/tcp_get_cookie_sock(). Later tcp_child_process() invokes subflow_data_ready() on the parent socket regardless of the subflow kind, leading to poll wakeups even if the later accept will block. Address the issue by double-checking the queue state before waking the user-space. Closes: multipath-tcp/mptcp_net-next#164 Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: f296234 ("mptcp: Add handling of incoming MP_JOIN requests") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8043c84 upstream. Looking through patchwork I don't see that there was any consensus to use switchdev notifiers only in case of netlink provided port flags but not sysfs (as a sort of deprecation, punishment or anything like that), so we should probably keep the user interface consistent in terms of functionality. http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/ http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/ Fixes: 3922285 ("net: bridge: Add support for offloading port attributes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bcc51a upstream. Reject the unsupported and invalid ct_state flags of cls flower rules. Fixes: e0ace68 ("net/sched: cls_flower: Add matching on conntrack info") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86dd986 upstream. Support also transmitting frames using the custom "8899 A" 4 byte tag. Qingfang came up with the solution: we need to pad the ethernet frame to 60 bytes using eth_skb_pad(), then the switch will happily accept frames with custom tags. Cc: Mauri Sandberg <sandberg@mailfence.com> Reported-by: DENG Qingfang <dqfext@gmail.com> Fixes: efd7fe6 ("net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04b385f upstream. 2 bytes of the MTU are reserved for Atheros DSA tag, but DSA core has already handled that since commit dc0fe7d. Remove the unnecessary reservation. Fixes: d51b6ce ("net: ethernet: add ag71xx driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210218034514.3421-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f176411 upstream. In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a node does not send any frame within this time, the sequence number check for can be ignored. This solves communication issues with Cisco IE 2000 in Redbox mode. Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a93dcaa upstream. Currently, the psample netlink skb is allocated with a size that does not account for the nested 'PSAMPLE_ATTR_TUNNEL' attribute and the padding required for the 64-bit attribute 'PSAMPLE_TUNNEL_KEY_ATTR_ID'. This can result in failure to add attributes to the netlink skb due to insufficient tail room. The following error message is printed to the kernel log: "Could not create psample log message". Fix this by adjusting the allocation size to take into account the nested attribute and the padding. Fixes: d8bed68 ("net: psample: Add tunnel support") CC: Yotam Gigi <yotam.gi@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Link: https://lore.kernel.org/r/20210225075145.184314-1-cmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 156ec6f ] Hung tasks and RCU stall cases were reported on systems which were not 100% busy. Investigation of such unexpected cases (no sign of potential starvation caused by tasks hogging the system) pointed out that the periodic sched tick timer wasn't serviced anymore after a certain point and that caused all machinery that depends on it (timers, RCU, etc.) to stop working as well. This issues was however only reproducible if HRTICK was enabled. Looking at core dumps it was found that the rbtree of the hrtimer base used also for the hrtick was corrupted (i.e. next as seen from the base root and actual leftmost obtained by traversing the tree are different). Same base is also used for periodic tick hrtimer, which might get "lost" if the rbtree gets corrupted. Much alike what described in commit 1f71add ("tick/sched: Do not mess with an enqueued hrtimer") there is a race window between hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in __hrtick_restart() in which the former might be operating on an already queued hrtick hrtimer, which might lead to corruption of the base. Use hrtick_start() (which removes the timer before enqueuing it back) to ensure hrtick hrtimer reprogramming is entirely guarded by the base lock, so that no race conditions can occur. Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210208073554.14629-2-juri.lelli@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
…R tablet [ Upstream commit bdea43f ] The Estar Beauty HD MID 7316R tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1317cc ] The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using SSP2 (AIF1) and it mostly works with the defaults. But instead of using DMIC1 it is using an analog mic on IN1, add a quirk for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df8359c ] Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has a jack-detect switch which reads 1/high when a jack is inserted, rather then using the standard active-low setup which most jack-detect switches use. All other settings are using the defaults. Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV flags for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c58947a ] The Acer One S1002 tablet is using an analog mic on IN1 and has its jack-detect connected to JD2_IN4N, instead of using the default IN3 for its internal mic and JD1_IN4P for jack-detect. Note it is also using AIF2 instead of AIF1 which is somewhat unusual, this is correctly advertised in the ACPI CHAN package, so the speakers do work without the quirk. Add a quirk for the mic and jack-detect settings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 688e812 upstream. Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec98ea7 upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9dbdf9 upstream. Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8310b77 upstream. Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2991397 upstream. Commit 3194a17 ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8822139 upstream. Since commit 9e2369c ("xen: add helpers to allocate unpopulated memory") foreign mappings are using guest physical addresses allocated via ZONE_DEVICE functionality. This will result in problems for the case of no balloon memory hotplug being configured, as the p2m list will only cover the initial memory size of the domain. Any ZONE_DEVICE allocated address will be outside the p2m range and thus a mapping can't be established with that memory address. Fix that by extending the p2m size for that case. At the same time add a check for a to be created mapping to be within the p2m limits in order to detect errors early. While changing a comment, remove some 32-bit leftovers. This is XSA-369. Fixes: 9e2369c ("xen: add helpers to allocate unpopulated memory") Cc: <stable@vger.kernel.org> # 5.9 Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2395928 upstream. There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram<id>/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan <wu-yan@tcl.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cca2100 upstream. Kernel test robot throws below warning -> >> drivers/remoteproc/mtk_scp.c:755:37: warning: unused variable >> 'mt8183_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8183_of_data = { ^ >> drivers/remoteproc/mtk_scp.c:765:37: warning: unused variable >> 'mt8192_of_data' [-Wunused-const-variable] static const struct mtk_scp_of_data mt8192_of_data = { ^ As suggested by Bjorn, there's no harm in just dropping the of_match_ptr() wrapping of mtk_scp_of_match in the definition of mtk_scp_driver and we avoid this whole problem. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1606513855-21130-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit caf6912 upstream. We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... Fixes: dd6bd0d ("swap: use bdev_read_page() / bdev_write_page()") Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…emulation commit 8813ff4 upstream. We currently unconditionally try to emulate newer instructions on older Power versions that could cause issues. Gate it. Fixes: 350779a ("powerpc: Handle most loads and stores in instruction emulation code") Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/161157995977.64773.13794501093457185080.stgit@thinktux.local [Dropped a few missing hunks for the backport to v5.10] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718aae9 upstream. We currently just percolate the return value from analyze_instr() to the caller of emulate_step(), especially if it is a -1. For one particular case (opcode = 4) for instructions that aren't currently emulated, we are returning 'should not be single-stepped' while we should have returned 0 which says 'did not emulate, may have to single-step'. Fixes: 930d628 ("powerpc: sstep: Add support for maddhd, maddhdu, maddld instructions") Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/161157999039.64773.14950289716779364766.stgit@thinktux.local Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e71a8d5 upstream. When I converted the tty_ldisc_ops 'read()' function to take a kernel pointer, I was a bit too aggressive about the ldisc returning EOVERFLOW. Yes, we want to have EOVERFLOW override any partially read data (because the whole point is that the buffer was too small for the whole packet, and we don't want to see partial packets), but it shouldn't override a previous EFAULT. And in fact, it really is just EOVERFLOW that is special and should throw away any partially read data, not "any error". Admittedly EOVERFLOW is currently the only one that can happen for a continuation read - and if the first read iteration returns an error we won't have this issue. So this is more of a technicality, but let's just make the intent very explicit, and re-organize the error handling a bit so that this is all clearer. Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddc5fda upstream. In commit "tty: implement read_iter", I left the read_iter conversion of the hung up tty case alone, because I incorrectly thought it didn't matter. Jiri showed me the errors of my ways, and pointed out the problems with that incomplete conversion. Fix it all up. Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64a6989 upstream. Back when the line disciplines did their own direct user accesses, they had to deal with the data copy possibly failing in the middle. Now that the user copy is done by the tty_io.c code, that failure case no longer exists. Remove the left-over error handling code that cannot trigger. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15ea8ae upstream. With the conversion to do the tty ldisc read operations in small chunks, the n_tty line discipline became noticeably slower for throughput oriented loads, because rather than read things in up to 2kB chunks, it would return at most 64 bytes per read() system call. The cost is mainly all in the "do system calls over and over", not really in the new "copy to an extra kernel buffer". This can be fixed by teaching the n_tty line discipline about the "cookie continuation" model, which the chunking code supports because things like hdlc need to be able to handle packets up to 64kB in size. Doing that doesn't just get us back to the old performace, but to much better performance: my stupid "copy 10MB of data over a pty" test program is now almost twice as fast as it used to be (going down from 0.1s to 0.054s). This is entirely because it now creates maximal chunks (which happens to be "one byte less than one page" due to how we do the circular tty buffers). NOTE! This case only handles the simpler non-icanon case, which is the one where people may care about throughput. I'm going to do the icanon case later too, because while performance isn't a major issue for that, there may be programs that think they'll always get a full line and don't like the 64-byte chunking for that reason. Such programs are arguably buggy (signals etc can cause random partial results from tty reads anyway), and good programs will handle such partial reads, but expecting everybody to write "good programs" has never been a winning policy for the kernel.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
… too commit d7fe75c upstream. The ICANON case is a bit messy, since it has to look for the line ending, and has special code to then suppress line ending characters if they match the __DISABLED_CHAR. So it actually looks up the line ending even past the point where it knows it won't copy it to the result buffer. That said, apart from all those odd legacy N_TTY ICANON cases, the actual "should we continue copying" logic isn't really all that complicated or different from the non-canon case. In fact, the lack of "wait for at least N characters" arguably makes the repeat case slightly simpler. It really just boils down to "there's more of the line to be copied". So add the necessarily trivial logic, and now the N_TTY case will give long result lines even when in canon mode. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb18802 upstream. When an IOCTL with argument size larger than 128 that also used array arguments were handled, two memory allocations were made but alas, only the latter one of them was released. This happened because there was only a single local variable to hold such a temporary allocation. Fix this by adding separate variables to hold the pointers to the temporary allocations. Reported-by: Arnd Bergmann <arnd@kernel.org> Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com Fixes: d14e6d7 ("[media] v4l: Add multi-planar ioctl handling code") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48698c9 upstream. This applies a SND_PCI_QUIRK(...) to the Clevo NH55RZQ barebone. This fixes the issue of the device not recognizing a pluged in microphone. The device has both, a microphone only jack, and a speaker + microphone combo jack. The combo jack already works. The microphone-only jack does not recognize when a device is pluged in without this patch. Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com> Co-developed-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/0eee6545-5169-ef08-6cfa-5def8cd48c86@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73e7161 upstream. This adds a new SND_PCI_QUIRK(...) and applies it to the Intel NUC 10 devices. This fixes the issue of the devices not having audio input and output on the headset jack because the kernel does not recognize when something is plugged in. The new quirk was inspired by the quirk for the Intel NUC 8 devices, but it turned out that the NUC 10 uses another pin. This information was acquired by black box testing likely pins. Co-developed-by: Eckhart Mohr <e.mohr@tuxedocomputers.com> Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210302180414.23194-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26af177 upstream. There is another MSI board (1462:cc34) that has dual Realtek codecs, and we need to apply the existing quirk for fixing the conflicts of Master control. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211743 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303142346.28182-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0d035be ] Add a workaround for the detection of VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single byte I2C reads to the EEPROM. Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module, which reports a manufacturer of "OEM". This manufacturer can't be matched as it appears in many different modules, so also match the part number too. Reported-by: Thomas Schreiber <tschreibe@gmail.com> Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 426c6cb ] The workaround for VSOL V2801F brand based GPON SFP modules added in commit 0d035be ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") works only for IDs added explicitly to the list. Since there are rebranded modules where OEM vendors put different strings into the vendor name field, we cannot base workaround on IDs only. Moreover the issue which the above mentioned commit tried to work around is generic not only to VSOL based modules, but rather to all GPON modules based on Realtek RTL8672 and RTL9601C chips. These include at least the following GPON modules: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 These Realtek chips have broken EEPROM emulator which for N-byte read operation returns just the first byte of EEPROM data, followed by N-1 zeros. Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM reading operation. Function sfp_i2c_read() now always uses single byte reading when it is required and when function sfp_hwmon_probe() detects single byte access, it disables registration of hwmon device, because in this case we cannot reliably and atomically read 2 bytes as is required by the standard for retrieving values from diagnostic area. (These Realtek chips are broken in a way that violates SFP standards for diagnostic interface. Kernel in this case simply cannot do anything less of skipping registration of the hwmon interface.) This patch fixes reading of EEPROM content from SFP modules based on Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays broken and cannot be fixed. Fixes: 0d035be ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Hulk Robot <hulkci@huawei.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210305120903.276489876@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.10.21 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
defconfig) and arm32 (imx_v6_v7_defconfig).-- andrey