Update 5.10-2.1.x-imx up to v5.10.74 #480
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 4df031f ] After commit 3da40c7 ("ext4: only call ext4_truncate when size <= isize"), i_disksize could always be updated to i_size in ext4_setattr(), and we could sure that i_disksize <= i_size since holding inode lock and if i_disksize < i_size there are delalloc writes pending in the range upto i_size. If the end of the current write is <= i_size, there's no need to touch i_disksize since writeback will push i_disksize upto i_size eventually. So we can switch to check i_size instead of i_disksize in ext4_da_write_end() when write to the end of the file. we also could remove ext4_mark_inode_dirty() together because we defer inode dirtying to generic_write_end() or ext4_da_write_inline_data_end(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55ce2f6 ] Current error path of ext4_write_inline_data_end() is not correct. Firstly, it should pass out the error value if ext4_get_inode_loc() return fail, or else it could trigger infinite loop if we inject error here. And then it's better to add inode to orphan list if it return fail in ext4_journal_stop(), otherwise we could not restore inline xattr entry after power failure. Finally, we need to reset the 'ret' value if ext4_write_inline_data_end() return success in ext4_write_end() and ext4_journalled_write_end(), otherwise we could not get the error return value of ext4_journal_stop(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58eafe1 ] The SoundWire BEs make use of 'stream' functions for .prepare and .trigger. These functions will in turn force a Bank Switch, which implies a wait operation. Mark SoundWire BEs as nonatomic for consistency, but keep all other types of BEs as is. The initialization of .nonatomic is done outside of the create_sdw_dailink helper to avoid adding more parameters to deal with a single exception to the rule that BEs are atomic. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67fd71b ] Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid/<dev>/rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori <morimolymoly@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 310e2d4 ] ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is specified (`-p tcp`, for example). However, if the flag is not set, `ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which case the fragment offset is left uninitialized and a garbage value is passed to each matcher. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c8fbaa ] Add the new PIDs to wacom_wac.c to support the new models in the Intuos series. [jkosina@suse.cz: fix changelog] Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a8e181 ] Invoke release_firmware() when the firmware fails to boot in sof_probe_continue(). The request_firmware() framework must be informed of failures in sof_probe_continue() otherwise its internal "batching" feature (different from caching) cached the firmware image forever. Attempts to correct the file in /lib/firmware/ were then silently and confusingly ignored until the next reboot. Unloading the drivers did not help because from their disconnected perspective the firmware had failed so there was nothing to release. Also leverage the new snd_sof_fw_unload() function to simplify the snd_sof_device_remove() function. Signed-off-by: Marc Herbert <marc.herbert@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…neric [ Upstream commit 30db406 ] masq_inet6_event is called asynchronously from system work queue, because the inet6 notifier is atomic and nf_iterate_cleanup can sleep. The ipv4 and device notifiers call nf_iterate_cleanup directly. This is legal, but these notifiers are called with RTNL mutex held. A large conntrack table with many devices coming and going will have severe impact on the system usability, with 'ip a' blocking for several seconds. This change places the defer code into a helper and makes it more generic so ipv4 and ifdown notifiers can be converted to defer the cleanup walk as well in a follow patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7970a19 ] The ipv4 and device notifiers are called with RTNL mutex held. The table walk can take some time, better not block other RTNL users. 'ip a' has been reported to block for up to 20 seconds when conntrack table has many entries and device down events are frequent (e.g., PPP). Reported-and-tested-by: Martin Zaharinov <micron10@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6555f8 ] WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ Freescale#253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bb0bd8 ] When we have several pending signals, have entered with the kernel with large exception frame *and* have already built at least one sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc are going to be junk - the real values are in shifted exception stack frame we'd built when putting together the first sigframe. If that happens, subsequent sigframes are going to be garbage. Not hard to fix - just need to find the "adjusted" frame first and look for format/vector/sr/pc in it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
… clock [ Upstream commit 6f7d704 ] The return value of devm_clk_get should in general be propagated to upper layer. In this case the clk is optional, use the appropriate wrapper instead of interpreting all errors as "The optional clk is not available". Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b193e15 ] We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 111461d ] When rhashtable_init() fails, it returns -EINVAL. However, since error return value of rhashtable_init is not checked, it can cause use of uninitialized pointers. So, fix unhandled errors of rhashtable_init. Signed-off-by: MichelleJin <shjy180909@gmail.com> Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b3b353 ] Commit 9d682ea ("vboxsf: Fix the check for the old binary mount-arguments struct") was meant to fix a build error due to sign mismatch in 'char' and the use of character constants, but it just moved the error elsewhere, in that on some architectures characters and signed and on others they are unsigned, and that's just how the C standard works. The proper fix is a simple "don't do that then". The code was just being silly and odd, and it should never have cared about signed vs unsigned characters in the first place, since what it is testing is not four "characters", but four bytes. And the way to compare four bytes is by using "memcmp()". Which compilers will know to just turn into a single 32-bit compare with a constant, as long as you don't have crazy debug options enabled. Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/ Cc: Arnd Bergmann <arnd@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103bde3 ] When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aaron Young <aaron.young@oracle.com> Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6680576 ] gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd689ed ] Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cced4c0 ] There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f792565 ] Users of rdpmc rely on the mmapped user page to calculate accurate time_enabled. Currently, userpage->time_enabled is only updated when the event is added to the pmu. As a result, inactive event (due to counter multiplexing) does not have accurate userpage->time_enabled. This can be reproduced with something like: /* open 20 task perf_event "cycles", to create multiplexing */ fd = perf_event_open(); /* open task perf_event "cycles" */ userpage = mmap(fd); /* use mmap and rdmpc */ while (true) { time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */ time_enabled_read = read(fd).time_enabled; if (time_enabled_mmap > time_enabled_read) BUG(); } Fix this by updating userpage for inactive events in merge_sched_in. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-and-tested-by: Lucian Grijincu <lucian@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d40a6 ] vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f067d55 ] The bytes for max_power_out from the ibm-cffps devices differ in byte order for some power supplies. The Witherspoon power supply returns the bytes in MSB/LSB order. The Rainier power supply returns the bytes in LSB/MSB order. The Witherspoon power supply uses version cffps1. The Rainier power supply should use version cffps2. If version is cffps1, swap the bytes before output to max_power_out. Tested: Witherspoon before: 3148. Witherspoon after: 3148. Rainier before: 53255. Rainier after: 2000. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com [groeck: Replaced yoda programming] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20211014145207.979449962@linuxfoundation.org Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.10.74 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
zandrey
added a commit
to zandrey/meta-freescale
that referenced
this pull request
Oct 19, 2021
Kernel repository has been upgraded up to v5.10.74 from stable korg. Following upstream commits are included in this version: ---- 77434fe5a077 Linux 5.10.74 42b49f012b6a hwmon: (pmbus/ibm-cffps) max_power_out swap changes bb893f075431 sched: Always inline is_percpu_thread() bdae2a083436 perf/core: fix userpage->time_enabled of inactive events 57c7ca3d5592 scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported" d993d1e1c411 scsi: ses: Fix unsigned comparison with less than zero 621ddffb70db drm/amdgpu: fix gart.bo pin_count leak a5ba615fbeb3 net: sun: SUNVNET_COMMON should depend on INET db868b45324d vboxfs: fix broken legacy mount signature checking 42c871d38e3d mac80211: check return value of rhashtable_init bda06aff03a1 net: prevent user from passing illegal stab size 3d68c7b0ab5b hwmon: (ltc2947) Properly handle errors when looking for the external clock 194e8a4f0acd m68k: Handle arrivals of multiple signals correctly 977aee58142a mac80211: Drop frames from invalid MAC address in ad-hoc mode 9ec9a975ea37 netfilter: nf_nat_masquerade: defer conntrack walk to work queue 5182d6db80bb netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic bcb647c1e15d ASoC: SOF: loader: release_firmware() on load failure to avoid batching f6952b1e22c2 HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs ddc4ba737bcb netfilter: ip6_tables: zero-initialize fragment offset ddf026d6ae9a HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS 0bcfa99e8fae ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic 14cbfeeee41b ext4: correct the error path of ext4_write_inline_data_end() d7a15e1e4fd7 ext4: check and update i_disksize properly ---- Link: https://lore.kernel.org/r/20211014145207.979449962@linuxfoundation.org # v5.10.74 Link: Freescale/linux-fslc#480 Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
otavio
pushed a commit
that referenced
this pull request
Aug 2, 2022
We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed6 ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
angolini
pushed a commit
to angolini/linux-fslc
that referenced
this pull request
Aug 17, 2022
[ Upstream commit 5a15912 ] We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ Freescale#480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed6 ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Aug 22, 2022
[ Upstream commit 5a15912 ] We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ Freescale#480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed6 ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
16 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
imx_v8_defconfig) and arm32 (imx_v7_defconfig).-- andrey