ConfigNOW Command Reference
TABLE OF CONTENTS
-
ConfigNOW Command Reference
-
Detailed Command Information
- activate_composite
- Config_diff
- configure_domain
- configure_nodemanager
- configure_obpm
- create_domain
- db_switchover
- deploy_apps
- deploy_composite
- deploy_composite_with_cp
- deploy_osb_config
- example
- example_using_ant
- help
- install_obpm
- install_osb
- install_osb10g
- install_soa_suite
- install_weblogic
- list_composites
- opatch_XXX
- Validate_config
- password_encrypter
- run_rcu
- set_default_composite
- setup_oer_reports
- show_config
- show_config_lineage
- shutdown_all_servers
- start_composite
- start_wls_admin
- start_composite
- stop_wls_admin
- undeploy_composite
-
Detailed Command Information
Each command is listed in the following section with parameters and properties used, as well as example output.
activate_composite activates a previously retired SCA composite application, allowing it to resume processing requests.
| ConfigNOW activate_composite <env> <config> |
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.name | Yes | Name of composite to activate |
| composite.revision | Yes | Specific revision of composite to activate |
| soa.host=localhost |
|---|
| wls.server.soa_server1.listener.port=8001 |
| wls.admin.username=weblogic |
| wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg== |
| composite.name=HelloWorld |
| composite.revision=1.0 |
|
os_prompt> ./ConfigNOW.sh activate_composite local soa11g -Dcomposite.name=HelloWorld -Dcomposite.revision=1.0 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command activate_composite as ant target in build file: core/commands/ant/composite-mgmt.xml activate_composite: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. activateComposite: [input] skipping input as property host has already been set. [input] skipping input as property port has already been set. [input] skipping input as property user has already been set. [secure-input] skipping secure-input as property password has already been set. INFO skipping secure-input as property password has already been set. [input] skipping input as property compositeName has already been set. [input] skipping input as property revision has already been set. [echo] oracle.home = /opt/wls1035_native/soa/bin/.. compositeMgrTask: [java] Connecting to: service:jmx:t3://localhost:8001/jndi/weblogic.management.mbeanservers.runtime [java] connection initiated [java] Composite (default/HelloWorld!1.0) is successfully activated. INFO Command completed. BUILD SUCCESS |
Config_diff command is used to dump the configuration to a file and used to compare against a baseline or previous configuration. The output generated is both a HTML or plain .txt file
ConfigNOW config_diff <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to dump the configuration for |
| Config | Yes | Configuration file to recognise the environment to read the domain configuration |
| Property | Required | Description |
|---|---|---|
| config.date_previous | Yes | Previous date to compare the configuration |
| config.date_diff | Yes | Can be a date or a string constant such as previous |
 |
configure_domain creates any resources defined in the environment and configuration file referenced as part of invocation. The command requires the administration server for the domain.
| ConfigNOW configure_domain <env> <config> |
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to configure domain for |
| config | Yes | Configuration file containing domain resources to be configured |
All
|
os_prompt> ./ConfigNOW.sh configure_domain local jms_example found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/jms_example.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core/commands/configure_domain.py INFO Establishing connection to Admin Server at URL [t3://localhost:7001], attempt #1 Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'as' that belongs to domain 'jms_example'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit(). For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. No stack trace available. INFO Unable to find filestore [AuditMessageStoreFile], trying to create new one. MBean type FileStore with name AuditMessageStoreFile has been created successfully. INFO File store directory [/opt/wls1034/domains/jms_example/AuditMessageStoreFile] has been created successfully. INFO JDBC DataSource is not specified, skipping No stack trace available. INFO Creating JMS Server [AuditJMSServer] MBean type JMSServer with name AuditJMSServer has been created successfully. INFO Setting target [ as ]. No stack trace available. INFO Unable to lookup JMS resource [AuditJMSModule], trying to create new one. INFO Creating JMS module [AuditJMSModule] MBean type JMSSystemResource with name AuditJMSModule has been created successfully. INFO Creating SubDeployment [AuditJMS] INFO Configuring resources in SubDeployment [AuditJMS]. INFO No connection factories specified in SubDeployment [AuditJMS], skipping. INFO Creating queue [AuditRecordQueue]. INFO Queue [AuditRecordQueue] has been created successfully. INFO Setting JNDI [com.integral.supportnow.AuditRecordQueue]. INFO Setting SubDeployment name [AuditJMS]. INFO No topics specified in SubDeplyment [AuditJMS], skipping. INFO No distributed queues specified in SubDeplyment [AuditJMS], skipping. INFO No distributed topics specified in SubDeplyment [AuditJMS], skipping. INFO No security providers specified, skipping. INFO Setting node manager username [ weblogic ] and password [ xxxxxxxxx ] INFO No applications to deploy Saving all your changes ... Saved all your changes successfully. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed INFO Command completed. BUILD SUCCESS |
configure_nodemanager configures the node manager home for a WebLogic Server installation, creating all necessary configuration and security files.
| ConfigNOW configure_nodemanager <env> <config> |
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to configure node manager for |
| Config | Yes | Configuration file to use to configure node manager |
| Property | Required | Description |
|---|---|---|
| wls.oracle.home | Yes | The full path of the existing Fusion Middleware (WebLogic) install home |
| wls.domain.javahome | Yes | The Java instance used by the installation |
| wls.name | Yes | The name of the existing WebLogic home directory. For all 10.3.x versions of WebLogic this is typically ‘wlserver_10.3’ |
| wls.admin.name | Yes | Name of the admin server for the relevant domain |
| wls.domain.dir | Yes | Root directory of the relevant domain |
| wls.domain.name | Yes | Name of the relevant domain |
| wls.admin.listener.address | Yes | Network address of the admin server for the relevant domain |
| wls.admin.listener.port | Yes | Port bound to by the admin server for the relevant domain |
| nodemanager.startscriptenabled | No | Whether node manager will use a start script to boot WebLogic Server instances |
| nodemanager.crashrecovery | No | Whether Node Manager will restart servers that were running at point of server failure after recovery |
| nodemanager.domain.dir.sharing | No | Whether the domain directory monitored by node manager is shared on network storage |
| nodemanager.loglimit | No | Number of log files retained by Node Manager |
| nodemanager.listener.port | No | Port Node Manager will bind to at runtime (defaults to 5556) |
| nodemanager.listener.address | No | Network address Node Manager will bind to at runtime |
| nodemanager.secure.listener | No | Whether node manager will use SSL at runtime |
| nodemanager.arguments | No | Additional arguments passed to the JVM as part of the process of starting node manager |
|
os_prompt> ./ConfigNOW.sh configure_nodemanager local wls1035 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/wls1035.properties INFO setenv file verified. INFO WLST support: True INFO Running command configure_nodemanager as ant target in build file: core/commands/ant/weblogic-common.xml validate.install.config: [echo] Fusion Middleware Home: /opt/wls1035 [echo] Java Home: /opt/jdk1.6.0_25 [echo] WebLogic Name: wlserver_10.3 validate.admin.config: [echo] WebLogic Domain Name: simple_domain [echo] WebLogic Domain Directory: /opt/wls1035/domains [echo] WebLogic Admin Server Name: as [echo] WebLogic Admin Listener Address: localhost [echo] WebLogic Admin Listener Port: 7001 configure_nodemanager: [copy] Copying 1 file to /opt/wls1035/wlserver_10.3/common/nodemanager [copy] Copying 1 file to /opt/wls1035/wlserver_10.3/common/nodemanager [copy] Copying 1 file to /opt/wls1035/wlserver_10.3/common/nodemanager [copy] Copying 1 file to /opt/wls1035/wlserver_10.3/server/bin [echo] Setting up nodemanager home /opt/wls1035/wlserver_10.3/common/nodemanager [propertyfile] Updating property file: /opt/wls1035/wlserver_10.3/common/nodemanager/nodemanager.domains INFO Command completed. BUILD SUCCESS |
configure_obpm configures the deployable applications and database schema for OBPM 10g prior to deployment to a WebLogic Server environment.
| ConfigNOW configure_obpm <env> <config> |
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to configure OBPM for |
| config | Yes | Configuration file to use to configure OBPM |
| Property | Required | Description |
|---|---|---|
| obpm.home | Yes | Location of OBPM installation |
| obpm.admin.user | Yes | Username to create for OBPM administration user |
| obpm.admin.password | Yes | Password to create for OBPM administration user |
| obpm.db.dir.host | Yes | Database host for the OBPM Directory schema |
| obpm.db.engine.host | Yes | Database host for the OBPM Engine schema |
| obpm.db.dir.username | Yes | Username for OBPM Directory database schema |
| obpm.db.dir.port | Yes | Database port for OBPM Directory database schema |
| obpm.db.engine.port | Yes | Database port for OBPM Engine database schema |
| obpm.db.dir.sid | Yes | Database SID for OBPM Directory database schema |
| obpm.db.engine.sid | Yes | Database SID for OBPM Engine database schema |
| obpm.db.dir.password | Yes | Database password for OBPM Directory database schema |
| obpm.organisation.id | Yes | Name of the organization |
| obpm.sys.password | Yes | Password for system administrator |
| obpm.db.engine.username | Yes | Username for OBPM Engine schema |
| obpm.db.engine.password | Yes | Password for OBPM Engine schema |
| obpm.engines.dir | ||
| obpm.ears.dir | ||
| obpm.engine.id | Identifier to use for OBPM engine |
create_domain creates a new WebLogic Server domain. The combination of environment and configuration file will determine the domain template and extension templates used to create the new domain.
ConfigNOW create_domain <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to create domain for |
| config | Yes | Configuration file to use to create domain |
All
|
os_prompt> ./ConfigNOW.sh create_domain local jms_example found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/jms_example.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core/commands/create_domain.py INFO Creating domain: /opt/wls1034/domains/jms_example INFO Reading template INFO Writing domain INFO Unable to lookup machine [machine1]. The machine will be created. INFO Node manager does not exist, creating new one. INFO Setting node manager type [Plain]. INFO Setting node manager address [localhost]. INFO Setting node manager port [5002]. INFO Setting node manager debug [None]. INFO Debug Enable is not specified, skipping. INFO Lookup server [as] INFO Assigning machine [machine1] to admin server [as]. INFO Server [as] already exists, checking REPLACE flag. INFO Setting Auto Restart [None]. INFO WorkManager(s) is not specified, skipping. INFO Command completed. BUILD SUCCESS |
db_switchover performs a failover of a RAC database configuration between RAC sites. The current value of the rac.site configuration property in configuration files for the environment determines the RAC site that will be failed over to.
ConfigNOW db_switchover <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to perform database switchover for |
| config | Yes | Configuration file to use to for database switchover |
| Property | Required | Description |
|---|---|---|
| rac.site | Yes | RAC site to fail over to |
| jdbc.multidatasources | Yes | List of JDBC multidatasources to fail over configuration for |
rac.site=rac2
rac1.datasources=AuditDB-rac1
rac2.datasources=AuditDB-rac2
jdbc.datasources=${rac1.datasources},${rac2.datasources}
jdbc.multidatasources=AuditDB
db.host=localhost
db.port=1521
db.service=XE
db.driver=oracle.jdbc.OracleDriver
ds.url=jdbc:oracle:thin:@${db.host}:${db.port}/${db.service}
jdbc.multidatasource.AuditDB.JNDI=jdbc/multi/Audit
jdbc.multidatasource.AuditDB.Name=AuditDBMultiDS
jdbc.multidatasource.AuditDB.AlgorithmType=Failover
jdbc.multidatasource.AuditDB.DataSources=AuditDB-rac1,AuditDB-rac2
jdbc.multidatasource.AuditDB.Targets=svrCluster
jdbc.multidatasource.AuditDB.svrCluster.TargetType=Cluster
jdbc.multidatasource.AuditDB.rac.site.rac1.DataSources=AuditDB-rac1
jdbc.multidatasource.AuditDB.rac.site.rac2.DataSources=AuditDB-rac2
|
os_prompt> ./ConfigNOW.sh db_switchover local rac_example found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/rac_example.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core/commands/db_switchover.py INFO Establishing connection to Admin Server at URL [t3://localhost:7001], attempt #1 Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'rac_example_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit(). For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. INFO Switched [AuditDBMultiDS] from [AuditDB-rac1] to [AuditDB-rac2] Saving all your changes ... Saved all your changes successfully. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Already in Edit Tree Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Saving all your changes ... Saved all your changes successfully. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: AdminServer INFO Command completed. BUILD SUCCESS |
deploy_apps deploys applications to configured targets for a WebLogic domain.
ConfigNOW deploy_apps <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to deploy applications for |
| config | Yes | Configuration file to use to for deploying applications |
| Property | Required | Description |
|---|---|---|
| applications | Yes | Comma-separated list of applications to deploy |
| applications.default.deploy.path | No | Default path to locate application files |
| application.<app>.name | Yes | Logical identifier for individual application |
| application.<app>.path | Yes | Directory files for application are located in |
| application.<app>.targets | Yes | Comma-separated list of targets to deploy application to |
applications=helloWorld
application.helloWorld.name=HelloWorldWeb
application.helloWorld.path=custom/resources/examples
application.helloWorld.file=HelloWorldWeb.war
application.helloWorld.targets=as
application.helloWorld.target.as.TargetType=Server
|
os_prompt> ./ConfigNOW.sh deploy_apps local deploy_example found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/deploy_example.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core/commands/deploy_apps.py INFO Establishing connection to Admin Server at URL [t3://localhost:7001], attempt #1 Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'as' that belongs to domain 'simple_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit(). For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. INFO Deploying application: HelloWorldWeb Deploying application from /home/kevinpowe/programming/work/RECTBETA2/custom/resources/examples/HelloWorldWeb.war to targets as (upload=false) ... <01/07/2011 11:34:47 AM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, HelloWorldWeb [archive: /home/kevinpowe/programming/work/RECTBETA2/custom/resources/examples/HelloWorldWeb.war], to as .> You have an edit session in progress, hence WLST will not block for your deployment to complete. Started the Deployment of Application. Please refer to the returned WLSTProgress object or variable LAST to track the status. Current Status of your Deployment: Deployment command type: deploy Deployment State : running Deployment Message : [Deployer:149140]The task cannot be processed further until the current edit session is activated. When this occurs, task processing will continue. The user can exit the deployer tool without affecting the task. Saving all your changes ... Saved all your changes successfully. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed INFO Command completed. BUILD SUCCESS |
deploy_composite deploys an SCA composite application to a SOA Suite domain.
ConfigNOW deploy_composite <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.location | Yes | Relative or absolute path to SAR file for composite to be deployed |
| composite.overwrite | No | Whether to overwrite any existing composite matching the deployed composite’s details |
| composite.default | No | Whether the composite being deployed is the default version |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.location=custom/resources/examples/sca_HelloWorld_rev1.0.jar
|
os_prompt> ./ConfigNOW.sh deploy_composite local composites_example found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/composites_example.properties INFO decrypting passwords in base file first: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command deploy_composite as ant target in build file: core/commands/ant/composite-mgmt.xml deploy_composite: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. deploy: [input] skipping input as property serverURL has already been set. [input] skipping input as property sarLocation has already been set. setting user/password..., user=weblogic Processing sar=custom/resources/examples/sca_HelloWorld_rev1.0.jar Adding sar file - /home/kevinpowe/programming/work/ConfigNOW/custom/resources/examples/sca_HelloWorld_rev1.0.jar INFO: Creating HTTP connection to host:localhost, port:8001 INFO: Received HTTP response from the server, response code=200 ---->Deploying composite success. INFO Command completed. BUILD SUCCESS |
deploy_composite_with_cp deploys an SCA composite application to a SOA Suite domain, using the specified configuration plan.
ConfigNOW deploy_composite_with_cp <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to deploy composite to |
| config | Yes | Configuration file to use to locate SOA Suite domain to deploy composite to |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.location | Yes | Relative or absolute path to SAR file for composite to be deployed |
| composite.cp | Yes | Relative or absolute path to configuration plan to use |
| composite.overwrite | No | Whether to overwrite any existing composite matching the deployed composite’s details |
| composite.default | No | Whether the composite being deployed is the default version |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.location=custom/resources/examples/sca_HelloWorld_rev1.0.jar
composite.cp=custom/resources/examples/HelloWorld_cfgplan.xml
|
os_prompt> ./ConfigNOW.sh deploy_composite_with_cp local soa11g -Dcomposite.cp=custom/resources/examples/HelloWorld_cfgplan.xml found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command deploy_composite_with_cp as ant target in build file: core/commands/ant/composite-mgmt.xml deploy_composite_with_cp: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. deploy: [input] skipping input as property serverURL has already been set. [input] skipping input as property sarLocation has already been set. setting user/password..., user=weblogic Processing sar=custom/resources/examples/sca_HelloWorld_rev1.0.jar Adding sar file - /home/kevinpowe/programming/work/ConfigNOW/custom/resources/examples/sca_HelloWorld_rev1.0.jar INFO: Creating HTTP connection to host:localhost, port:8001 INFO: Received HTTP response from the server, response code=200 ---->Deploying composite success. INFO Command completed. BUILD SUCCESS |
deploy_osb_config deploys a JAR file containing OSB configuration to a running domain
ConfigNOW deploy_osb_config <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate OSB domain |
| config | Yes | Configuration file to use to locate OSB domain to deploy to |
| Property | Required | Description |
|---|---|---|
| osb.configs | Yes | Comma-separated list of OSB configuration JARs to deploy |
| osb.config.<conf>.file | Yes | Full or relative path to OSB configuration file to deploy |
| osb.config.<conf>.file.custom | No | Optional customization file to use when deploying OSB configuration |
osb.configs=appserver
osb.config.appserver.file=C:/Work/ConfigNOW/sbconfig_appserver.jar
osb.config.appserver.file.custom=C:/Work/ConfigNOW/customization.xml
|
os_prompt>ConfigNOW.cmd deploy_osb_config local osb11g Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO ========================================================================= INFO This version of ConfigNOW 4.1 is a Release Candidate and as such will INFO expire on the 3rd of August 2012. At this time a subsequent Release INFO Candidate or the final release will be available on our website at: INFO http://www.integraltech.com.au INFO ========================================================================= INFO Loading configuration from file: config\environments\local\osb11g.properties INFO WLST support: True INFO Running command from jython file: core\commands\deploy_osb_config.py INFO Establishing connection to Admin Server at URL [t3://localhost:7001], attempt #1 Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'osb11115manualdomain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. INFO Deploying OSB configuration from file 'C:/Work/ConfigNOW/sbconfig_appserver.jar' Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime) <trimmed output> INFO Command completed. BUILD SUCCESS |
example is an example command implemented using a Jython script. It is provided as part of ConfigNOW as a template for creating custom scripted commands. The Jython implementation can be found in a ConfigNOW distributation at custom\commands\example.py
ConfigNOW example <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to pass to command |
| config | Yes | Configuration file to pass to command |
None
|
os_prompt> ./ConfigNOW.sh example local simple found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/simple.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: custom/commands/example.py INFO wls.oracle.home = /opt/wls1034 INFO running global post command plugin: custom/plugins/example_post.py INFO wls.oracle.home = /opt/wls1034 INFO Command completed. BUILD SUCCESS |
example_using_ant is an example command implemented using an Ant build file. It is provided as part of ConfigNOW as a template for creating custom commands implemented using Ant build files. The Ant implementation can be found in a ConfigNOW distribution at custom\commands\ant\example_using_ant.xml
ConfigNOW example_using_ant <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to pass to command |
| config | Yes | Configuration file to pass to command |
All
|
os_prompt> ./ConfigNOW.sh example_using_ant found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO WLST support: True INFO running global pre command plugin: custom/plugins/example_using_ant_pre.py INFO -- in example_using_ant_pre.py - doing some global custom stuff pre ant task... INFO Running command example_using_ant as ant target in build file: custom/commands/ant/example_using_ant.xml example_using_ant: [echo] hello from ant [echo] wls.oracle.home=${wls.oracle.home} INFO Command completed. BUILD SUCCESS |
help displays all available ConfigNOW commands, with a brief description of each command.
ConfigNOW help
None
None
|
os_prompt> ConfigNOW help INFO WLST support: False INFO Running command from jython file: core\commands\help.py Available commands are: activate_composite Activate a composite configure_domain Configure existing WebLogic Domain configure_obpm Configure Oracle BPM 10g database and applications create_domain Create WebLogic Domain db_switchover Database Switchover to Alternate Site deploy_apps Deploy JEE applications to WebLogic deploy_composite Deploy a composite deploy_composite_with_cp Deploy a composite specifying a config plan deploy_eALOC Deploys eALOC components to target environment install_obpm Install Oracle BPM 10g install_osb Install Oracle Service Bus 11g install_osb10g Install Oracle Service Bus 10g install_soa_suite Install SOA Suite install_weblogic Install WebLogic list_composites List deployed composites password_encrypter Encrypts all the password properties retire_composite Retire a composite run_rcu Runs Repository Creation Utility set_default_composite Sets a composite revision as the default setup_oer_reports Setup OER reports in BI Publisher show_config Display the config as a fully resolved set of properties start_composite Start a composite start_wls_admin Start WebLogic admin server stop_composite Stop a composite stop_wls_admin Stop WebLogic admin server undeploy_composite Undeploy a composite INFO Command completed. BUILD SUCCESS |
install_obpm installs Oracle BPM 10g.
ConfigNOW install_obpm <env> <config> -Dobpm.install.file=<install file location> -Dobpm.home=<obpm home>
| Property | Required | Description |
|---|---|---|
| env | No | Environment to use to install OBPM |
| config | No | Configuration file to use to install OBPM |
| Property | Required | Description |
|---|---|---|
| obpm.install.file | Yes | File to use to install OBPM |
| obpm.home | Yes | Location to install OBPM to |
| password.prompt | No | Whether to prompt for database passwords if not supplied |
| global.jdbc.password.value | Yes | Password to set for OBPM database users |
|
os_prompt> ./ConfigNOW.sh install_obpm local soa11g -Dobpm.install.file=/media/Work/OracleBPMEnterpriseWL103200_lin_jvm32.bin -Dobpm.home=/opt/obpm10g -Dglobal.jdbc.password.value=password found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO setenv file verified. INFO WLST support: True INFO Running command install_obpm as ant target in build file: core/commands/ant/build-obpm.xml validate.obpm.install: install_obpm: [echo] Installing Oracle BPM with the following settings: [echo] ================================================ [echo] OBPM Home: /opt/obpm10g [echo] ================================================ [echo] Please be patient the silent installer may take several minutes to run. [exec] Preparing to install... [exec] Extracting the JRE from the installer archive... [exec] Unpacking the JRE... [exec] Extracting the installation resources from the installer archive... [exec] Configuring the installer for this system's environment... [exec] Launching installer... [exec] Preparing SILENT Mode Installation... [exec] =============================================================================== [exec] Oracle BPM Enterprise for Oracle WebLogic 10.3(created with InstallAnywhere by Macrovision) [exec] ------------------------------------------------------------------------------------------- [exec] =============================================================================== [exec] Installing... [exec] ------------- [exec] [==================|==================|==================|==================] [exec] [------------------|------------------|------------------|------------------] [exec] Installation Complete. [echo] ================================================ [echo] ================================================ [echo] Oracle BPM Install Finished [echo] ================================================ [echo] ================================================ INFO Command completed. BUILD SUCCESS |
install_osb creates a new Oracle Service Bus (11g or higher) installation non-interactively.
ConfigNOW install_osb <env> <config> -Dosb.install.zip=<install file location>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use while installing OSB |
| config | Yes | Configuration file to use to guide OSB installation |
| osb_install_zip | Yes (unless property is specified in configuration properties) | The location of the OSB install file. |
| Property | Required | Description |
|---|---|---|
| osb.install.zip | Yes (unless osb.install.dir is set) |
The location of the OSB install file. Tested install files include:
|
| osb.install.dir | Yes (unless osb.install.zip is set) | The location of the Disk1 directory of the extract zip file. |
| wls.oracle.home | Yes | The full path of the existing Fusion Middleware (WebLogic) install home |
| wls.name | Yes | The name of the existing WebLogic home directory. For all 10.3.x versions of WebLogic this is typically ‘wlserver_10.3’ |
| osb.name | Yes | The desired name of the OSB home directory. |
| wls.domain.javahome | Yes | The java instance to use for the installation |
| osb.install.tmp.dir | No | The temporary directory to extract the install files to when osb.install.zip property is set. Use this property to change from the default temp directory. |
| oui.inventory.directory | Yes (when running on unix) | The directory to create the OUI inventory at |
| oui.install.group | Yes (when running on unix) | The unix group to use for the install (e.g. oinstall) |
| oui.inventory.loc | Yes (when running on unix) | The location to create the oraInst.loc file |
|
os_prompt> ./ConfigNOW.sh install_osb local osb11g Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/osb11g.properties INFO WLST support: True INFO Running command install_osb as ant target in build file: core/commands/ant/build-osb.xml validate.osb.install: populate.osb.rsp: [copy] Copying 1 file to /home/kevinpowe/programming/ConfigNOW/core/commands/ant/tmp unzip.osb.install.file: install_osb: [echo] Installing OSB with the following settings: [echo] ================================================ [echo] Middleware Home: /u02/app/oracle/product/fmw/11.1.1 [echo] OSB Home: /u02/app/oracle/product/fmw/11.1.1/Oracle_OSB1 [echo] WL Home: /u02/app/oracle/product/fmw/11.1.1/wlserver_10.3 [echo] ================================================ generic.oui.install: [echo] Please be patient the silent installer may take several minutes to run. [exec] Starting Oracle Universal Installer... [exec] Checking if CPU speed is above 300 MHz. Actual 2768 MHz Passed [exec] Checking Temp space: must be greater than 150 MB. Actual 7542 MB Passed [exec] Checking swap space: must be greater than 512 MB. Actual 1725 MB Passed [exec] Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-05-06_04-34-16PM. Please wait ...Log: /opt/oracle/oraInventory/logs/install2011-05-06_04-34-16PM.log [exec] Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved. [exec] Reading response file.. [exec] sh: /bin/rpm: not found [exec] sh: /bin/rpm: not found [exec] Warning: Check:CertifiedVersions failed. [exec] Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11 [exec] Actual Result: (Unknown OS version) [exec] Check complete. The overall result of this check is: Failed <<<< [exec] Problem: This Oracle software is not certified on the current operating system. [exec] Recommendation: Make sure you are installing the software on the correct platform. [exec] Check complete. The overall result of this check is: Failed <<<< [exec] Problem: Some recommended packages are missing (see above). [exec] Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the product release notes to find out how to get the missing packages and update the system. [exec] Expected result: 1024MB [exec] Actual Result: 2012MB [exec] Check complete. The overall result of this check is: Passed [exec] Warning: Check:GLIBC failed. [exec] TotalMemory Check: Success. [exec] Verifying data...... [exec] Copying Files... [exec] -----------20%----------40%----------60%----------80%--------100% [exec] The installation of Oracle AS Common Toplevel Component, Oracle Service Bus completed successfully. [delete] Deleting: /home/kevinpowe/programming/ConfigNOW/core/commands/ant/tmp/osb_Oracle_OSB1.rsp [echo] ================================================ [echo] ================================================ [echo] OSB Install Finished [echo] ================================================ [echo] ================================================ INFO Command completed. BUILD SUCCESS |
install_osb10g creates a new Oracle Service Bus installation non-interactively.
ConfigNOW install_osb10g <env> <config> -Dosb.install.file=<install file location>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use while installing OSB |
| config | Yes | Configuration file to use to guide OSB installation |
| osb_install_file | Yes (unless property is specified in configuration properties) | The location of the OSB install binary. |
| Property | Required | Description |
|---|---|---|
| osb.install.file | Yes | The location of the OSB install binary. |
| wls.bea.home | Yes | The full path of the existing Fusion Middleware (WebLogic) install home |
| wls.name | Yes | The name of the existing WebLogic home directory. For all 10.3.x versions of WebLogic this is typically ‘wlserver_10.3’ |
| osb.name | Yes | The desired name of the OSB home directory. |
| wls.nodemanager.port | Yes | Port to be used by default nodemanager configuration created on install |
|
os_prompt> ConfigNOW install_osb10g dev osb10g INFO Loading configuration from file: config\environments\dev\osb10g.properties INFO WLST support: False INFO Running command install_osb10g as ant target in build file: core\commands\ant\build-osb10g.xml validate.osb.install: populate.silent.xml: [copy] Copying 1 file to C:\programming\projects\work\ConfigNOW\core\commands\ant\tmp install_osb10g: [echo] Temporary folder location: C:\Users\kpowe\AppData\Local\Temp\ [echo] Please be patient the silent installer may take several minutes to run. [exec] Extracting ................................................................................................. ... Done [delete] Deleting: C:\programming\projects\work\ConfigNOW\core\commands\ant\tmp\silent_osb.x ml INFO Command completed. BUILD SUCCESS |
install_soa_suite creates a new SOA Suite installation non-interactively.
ConfigNOW install_soa_suite <env> <config> [-Dsoa.suite.install.part1.zip=<install file location>]
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to install SOA Suite |
| config | Yes | Configuration file to use to guide SOA Suite installation |
| soa.suite.install.part1.zip | Yes (unless property is specified in configuration properties, or soa.suite.install.zip or soa.suite.install.dir are specified) | Location of the primary SOA Suite install file. |
| soa.suite.install.part2.zip | Yes (unless property is specified in configuration properties, or soa.suite.install.zip or soa.suite.install.dir are specified) | Location of the second part of the SOA Suite install file. |
| Property | Required | Description |
|---|---|---|
| wls.oracle.home | Yes | The full path of the existing Fusion Middleware (WebLogic) install home |
| soa.name | Yes | The desired name of the SOA home directory |
| wls.domain.javahome | Yes | The Java instance to use for the installation |
| soa.install.tmp.dir | No | The temporary directory to extract the install files to when soa.suite.install.zip, soa.suite.install.part1.zip or soa.suite.install.part2.zip properties are set. Use this property to change from the default temp directory. |
| oui.inventory.directory | Yes (when running on Unix) | The directory to create the OUI inventory in |
| oui.install.group | Yes (when running on Unix) | The unix group to use for the install (e.g. oinstall) |
| oui.inventory.loc | Yes (when running on Unix) | The location to create the oraInst.loc file |
|
os_prompt>./ConfigNOW.sh install_soa_suite local soa11g -Dsoa.suite.install.part1.zip=/home/kevinpowe/Downloads/ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip -Dsoa.suite.install.part2.zip=/home/kevinpowe/Downloads/ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command install_soa_suite as ant target in build file: core/commands/ant/build-soasuite.xml validate.soa.suite.install: populate.soa.suite.rsp: [copy] Copying 1 file to /home/kevinpowe/programming/work/ConfigNOW/core/commands/ant/tmp unzip.install.files: remove.soa.install.tmp.dir: [unzip] Expanding: /home/kevinpowe/Downloads/ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip into /tmp/soa-suite [unzip] Expanding: /home/kevinpowe/Downloads/ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip into /tmp/soa-suite install_soa_suite: [echo] Installing SOA Suite with the following settings: [echo] ================================================ [echo] Middleware Home: /opt/wls1035_native [echo] SOA Home: /opt/wls1035_native/soa [echo] ================================================ generic.oui.install: [echo] Please be patient the silent installer may take several minutes to run. [exec] Starting Oracle Universal Installer... [exec] Checking if CPU speed is above 300 MHz. Actual 2763 MHz Passed [exec] Checking Temp space: must be greater than 150 MB. Actual 30269 MB Passed [exec] Checking swap space: must be greater than 512 MB. Actual 3376 MB Passed [exec] Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-08-31_03-48-53PM. Please wait ...Log: /home/kevinpowe/oraInventory/logs/install2011-08-31_03-48-53PM.log [exec] Copyright (c) 1996, 2011, Oracle and/or its affiliates. All rights reserved. [exec] Reading response file.. [exec] sh: /bin/rpm: not found [exec] sh: /bin/rpm: not found [exec] Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11 [exec] Actual Result: (Unknown [exec] Check complete. The overall result of this check is: Failed <<<< [exec] Problem: This Oracle software is not certified on the current operating system. [exec] Recommendation: Make sure you are installing the software on the correct platform. [exec] Warning: Check:CertifiedVersions failed. [exec] Check complete. The overall result of this check is: Failed <<<< [exec] Problem: Some recommended packages are missing (see above). [exec] Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the product release notes to find out how to get the missing packages and update the system. [exec] Warning: Check:GLIBC failed. [exec] Expected result: 1024MB [exec] Actual Result: 3024MB [exec] Check complete. The overall result of this check is: Passed [exec] TotalMemory Check: Success. [exec] Verifying data...... [exec] Copying Files... [exec] -----------20%----------40%----------60%----------80%--------100% [exec] The installation of Oracle AS Common Toplevel Component, Oracle SOA Suite 11g completed successfully. [delete] Deleting: /home/kevinpowe/programming/work/ConfigNOW/core/commands/ant/tmp/soaSuite_soa.rsp [echo] ================================================ [echo] ================================================ [echo] SOA Suite Install Finished [echo] ================================================ [echo] ================================================ INFO Command completed. BUILD SUCCESS |
install_weblogic creates a new WebLogic Server installation non-interactively.
ConfigNOW install_weblogic <env> <config> -Dwls.install.file=<install file location>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to perform installation for |
| config | Yes | Configuration file to use to install WebLogic Server |
| Property | Required | Description |
|---|---|---|
| wls.install.file | Yes | The location of the WebLogic install binary. |
| wls.oracle.home | Yes | The full path of the Fusion Middleware home that will be created as part of installing WebLogic Server |
| wls.name | Yes | The name of the WebLogic home directory that will be created. |
| wls.nodemanager.port | Yes | Port to be used by default nodemanager configuration created on install |
wls.oracle.home=/opt/wls1035
wls.name=wlserver_10.3
wls.domain.javahome=/opt/jdk1.6.0_25
|
os_prompt> ./ConfigNOW.sh install_weblogic local wls1035 -Dwls.install.file=/home/kevinpowe/Downloads/wls1035_generic.jar found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/wls1035.properties INFO setenv file verified. INFO WLST support: True INFO Running command install_weblogic as ant target in build file: core/commands/ant/build-weblogic.xml validate.weblogic.install: populate.silent.xml: [copy] Copying 1 file to /home/kevinpowe/programming/work/RECTBETA2/core/commands/ant/tmp install_weblogic: [echo] Temporary folder location: /tmp [echo] Installing WebLogic with the following settings: [echo] ================================================ [echo] BEA/Oracle Home: /opt/wls1035 [echo] WebLogic Home: /opt/wls1035/wlserver_10.3 [echo] Node Manager Port: 5556 [echo] ================================================ [echo] Please be patient the silent installer may take several minutes to run. [echo] Performing install from jar file. [delete] Deleting: /home/kevinpowe/programming/work/RECTBETA2/core/commands/ant/tmp/silent_weblogic.xml [echo] ================================================ [echo] ================================================ [echo] WebLogic Install Finished [echo] ================================================ [echo] ================================================ INFO Command completed. BUILD SUCCESS |
list_composites lists metadata for all composites deployed in a SOA Suite domain.
ConfigNOW list_composites <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to list composites for |
| Config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
|
os_prompt> ./ConfigNOW.sh list_composites local soa11g found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command list_composites as ant target in build file: core/commands/ant/composite-mgmt.xml list_composites: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. listDeployedComposites: [input] skipping input as property host has already been set. [input] skipping input as property port has already been set. [input] skipping input as property user has already been set. [secure-input] skipping secure-input as property password has already been set. INFO skipping secure-input as property password has already been set. [echo] oracle.home = /opt/wls1035_native/soa/bin/.. compositeMgrTask: [java] Connecting to: service:jmx:t3://brother-eye:8001/jndi/weblogic.management.mbeanservers.runtime [java] connection initiated [java] Following 2 composites are currently deployed to the platform: [java] 1. SimpleApproval[1.0], partition=default, mode=active, state=on, isDefault=true, deployedTime=2011-11-02T12:37:16.311+11:00 [java] 2. schema-restriction[01.00.00], partition=default, mode=active, state=on, isDefault=true, deployedTime=2011-11-02T14:15:32.261+11:00 INFO Command completed. |
opatch_apply,opatch_lsinventory , opatch_rollback command applies oracle patches to offline domain. It’s based on Oracle’s opatch utility.
ConfigNOW opatch_apply <env> <config>
ConfigNOW opatch_lsinventory <env> <config>
ConfigNOW opatch_rollback <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to apply the patch for |
| Config | Yes | Configuration file to use to pickup details like Oracle_Home , patch directory etc |
| Property | Required | Description |
|---|---|---|
| opatch.patchesdir | Yes | The directory that contains the Patch zip file |
| opatch.patchname | Yes | Name of the patch file |
| opatch.patchid | Yes | Patch ID as specified by Oracle |
|
OS Prompt>ConfigNOW opatch_lsinventory local soa12c Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=256m; sup port was removed in 8.0 Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO ========================================================================= INFO ConfigNOW 4.1.7 INFO The latest releases of ConfigNOW are available at our website at: INFO http://www.integraltech.com.au INFO ========================================================================= INFO Loading configuration from file: config\environments\local\soa12c.properti es INFO setenv file verified. INFO WLST support: True INFO Running command opatch_lsinventory as ant target in build file: core\comma nds\ant\opatch.xml opatch_lsinventory: [echo] Applying an Oracle Patch using oPatch and the following settings: [echo] ================================================================= [echo] Middleware Home: C:/Oracle12c [echo] ================================================================= generic.opatch.run: [echo] Please be patient the oPatch tools may take several minutes to run. [echo] IMPORTANT: Please note that on Windows oPatch commands may need to b e run as Administrator [echo] IMPORTANT: If you are receiving message about a locked inventory or OPatch is throwing [echo] IMPORTANT: Null pointers, then this is likely your issue [exec] Oracle Interim Patch Installer version 13.2.0.0.0 [exec] Copyright (c) 2014, Oracle Corporation. All rights reserved. [exec] [exec] [exec] Oracle Home : C:/Oracle12c [exec] Central Inventory : C:\Program Files (x86)\Oracle\Inventory [exec] from : n/a [exec] OPatch version : 13.2.0.0.0 [exec] OUI version : 13.2.0.0.0 [exec] Log file location : C:/Oracle12c\cfgtoollogs\opatch\opatch2016-07-01 _09-41-59AM_1.log [exec] [exec] [exec] OPatch detects the Middleware Home as "C:\Oracle12c" [exec] [exec] Jul 01, 2016 9:43:17 AM oracle.sysman.oii.oiii.OiiiInstallAreaContro l initAreaControl [exec] INFO: Install area Control created with access level 0 [exec] Lsinventory Output file location : C:/Oracle12c\cfgtoollogs\opatch\l sinv\lsinventory2016-07-01_09-41-59AM.txt [exec] [exec] -------------------------------------------------------------------- ------------ [exec] [exec] There are no Interim patches installed in this Oracle Home. [exec] [exec]INFO Command completed. BUILD SUCCESS |
Validate_config command verifies for the completeness and correctness of the properties in the supplied properties file. This command is useful when you are first building up the config files for a specific environment to ensure the requirements of property inheritance are covered.
ConfigNOW validate_config <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment name |
| Config | Yes | Configuration file to validate the properties of |
No specific propert is required as long as you supply the name of the properties file whose config need to validated.
|
Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO ========================================================================= INFO ConfigNOW 4.2 INFO The latest releases of ConfigNOW are available at our website at: INFO http://www.integraltech.com.au INFO ========================================================================= 1.8.0_91 INFO Loading configuration from file: config\environments\local\simple12c.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core\commands\validate_config.py INFO Validating Configuration INFO Command completed. BUILD SUCCESS |
password_encrypter encrypts all password properties (any property ending in .password) in the properties files identified by command parameters, and writes the encrypted password values back to the properties file.
ConfigNOW password_encrypter <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to encrypt passwords for |
| Config | Yes | Configuration file to use to encrypt passwords in chain of files |
None
|
os_prompt> ConfigNOW password_encrypter dev soa11g INFO Loading configuration from file: config\environments\dev\soa11g.properties INFO WLST support: False INFO Running command from jython file: core\commands\password_encrypter.py INFO config file location :config\environments\dev\soa11g INFO Encrypting Passwords in config file INFO Command completed. BUILD SUCCESS |
run_rcu runs the repository creation utility to create database schemas for Fusion products.
ConfigNOW run_rcu <env> <config> [-Ddrop.rcu.schemas=true]
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to run RCU for |
| config | Yes | Configuration file to use to run RCU |
| drop.rcu.schemas | No | Indicates RCU should drop the configured schemas |
| Property | Required | Description |
|---|---|---|
| rcu.home | Yes | The RCU home directory. Under this directory ‘bin/rcu.bat’ or ‘bin/rcu’ can be found. |
| soa.sys.db.url | Yes | JDBC URL to access the database instance used by RCU |
| soa.schema.prefix | Yes | Database prefix to use when creating/dropping database tables. This allows multiple instances of a product to co-exist in the same database schema. |
| rcu.db.sys.password | No | SYS password used to connect to database as an administrative user. If this is not set, run_rcu will prompt the user for the SYS password. |
rcu.home=/home/batman/rcuTemp/rcuHome
soa.sys.db.url=jdbc:oracle:thin:@localhost:1521:xe
soa.schema.prefix=DEV
|
os_prompt>confignow run_rcu local soa11g -Ddrop.rcu.schemas=true Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config\environments\local\soa11g.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: core\commands\run_rcu.py INFO Executing RCU [Enter the sys database password] I got this: C:/Oracle/Middleware/rcuHome\bin\rcu.bat -silent -dropRepository -databaseType ORACLE -connectString jdbc:oracle:thin:@l ocalhost:1521:xe -dbUser sys -dbRole sysdba -schemaPrefix DEV -component MDS -component SOAINFRA -component BAM -compone nt ORASDPM -f < C:\Users\kpowe\AppData\Local\Temp\tmp19 Processing command line .... Repository Creation Utility - Checking Prerequisites Checking Global Prerequisites Repository Creation Utility - Checking Prerequisites Checking Component Prerequisites Repository Creation Utility - Drop Repository Drop in progress. Percent Complete: 5 Percent Complete: 5 Percent Complete: 10 Percent Complete: 30 Percent Complete: 45 Percent Complete: 45 Percent Complete: 48 Percent Complete: 54 Percent Complete: 69 Percent Complete: 69 Percent Complete: 72 Percent Complete: 78 Percent Complete: 81 Percent Complete: 81 Percent Complete: 84 Percent Complete: 87 Percent Complete: 97 Percent Complete: 100 Repository Creation Utility: Drop - Completion Summary Database details: Connect Descriptor : jdbc:oracle:thin:@localhost:1521:xe Connected As : sys Prefix for (prefixable) Schema Owners : DEV RCU Logfile : C:\Oracle\Middleware\rcuHome\rcu\log\logdir.2012-10-10_14-38\rcu.log Component schemas dropped: Component Status Logfile Metadata Services Success C:\Oracle\Middleware\rcuHome\rcu\log\logdir.2012-10-10_14-38\mds.log SOA Infrastructure Success C:\Oracle\Middleware\rcuHome\rcu\log\logdir.2012-10-10_14-38\soainfra.log Business Activity Monitoring Success C:\Oracle\Middleware\rcuHome\rcu\log\logdir.2012-10-10_14-38\bam.log User Messaging Service Success C:\Oracle\Middleware\rcuHome\rcu\log\logdir.2012-10-10_14-38\orasdpm.log Repository Creation Utility - Drop : Operation Completed INFO Command completed. BUILD SUCCESS |
set_default_composite sets the default revision number for a particular composite.
ConfigNOW set_default_composite <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.name | Yes | Name of composite to set default revision for |
| composite.revision | Yes | Revision to set as default for composite |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.name=HelloWorld
composite.revision=1.0
|
os_prompt> ./ConfigNOW.sh set_default_composite local soa11g -Dcomposite.name=HelloWorld -Dcomposite.revision=1.0 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command set_default_composite as ant target in build file: core/commands/ant/composite-mgmt.xml set_default_composite: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. assignDefaultComposite: [input] skipping input as property host has already been set. [input] skipping input as property port has already been set. [input] skipping input as property user has already been set. [secure-input] skipping secure-input as property password has already been set. INFO skipping secure-input as property password has already been set. [input] skipping input as property compositeName has already been set. [input] skipping input as property revision has already been set. [echo] oracle.home = /opt/wls1035_native/soa/bin/.. compositeMgrTask: [java] Connecting to: service:jmx:t3://localhost:8001/jndi/weblogic.management.mbeanservers.runtime [java] connection initiated [java] Composite (default/HelloWorld!1.0) is successfully set as default composite. INFO Command completed. BUILD SUCCESS |
setup_oer_reports packages and deploys Oracle Enterprise Repository reports into a Business Intelligence Publisher domain.
ConfigNOW setup_oer_reports <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| oer.name | Yes | Subdirectory underneath Oracle Home for OER installation |
| INSTALL_PATH | Yes | Directory for Oracle home |
| wls.domain.dir | Yes | Root directory of WebLogic Server domain |
| bi.publisher.app.location | Yes | Directory to use to create packaged application |
| bi.publisher.oer.xmlp.zip | Yes | Location of Business Intelligence reports to package |
| bi.publisher.manual.dir | Yes | Directory under which deployable reports applications can be found |
| bi.publisher.wls.target | Yes | Target servers in domain to deploy application to |
oer.name=repository111
INSTALL_PATH=/opt/wls1035_osb11115
wls.domain.dir=${INSTALL_PATH}/admin
bi.publisher.app.location=${wls.domain.dir}/apps/xmlpserver
bi.publisher.oer.xmlp.zip=${wls.oracle.home}/${oer.name}/core/tools/solutions/reports/BIP-Oracle.zip
bi.publisher.manual.dir=/home/kevinpowe/Downloads/bi/Oracle_Business_Intelligence_Publisher_Standalone/manual
bi.publisher.wls.target=AdminServer
|
os_prompt> ./ConfigNOW.sh setup_oer_reports local oer_simple found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/oer_simple.properties INFO setenv file verified. INFO WLST support: True INFO running global pre command plugin: custom/plugins/setup_oer_reports_pre.py INFO Running command setup_oer_reports as ant target in build file: core/commands/ant/build-bi-publisher.xml validate.oer.reports.properties: setup_oer_reports: [unzip] Expanding: /opt/wls1035_osb11115/repository111/core/tools/solutions/reports/BIP-Oracle.zip into /opt/wls1035_osb11115/admin/apps/xmlpserver [move] Moving 251 files to /opt/wls1035_osb11115/admin/apps/xmlpserver validate.bi.deploy.properties: deploy_bipublisher10_weblogic: [unzip] Expanding: /home/kevinpowe/Downloads/bi/Oracle_Business_Intelligence_Publisher_Standalone/manual/generic/xmlpserver.war into /opt/wls1035_osb11115/admin/apps/xmlpserver [java] weblogic.Deployer invoked with options: -adminurl t3://brother-eye:7001 -username weblogic -name xmlpserver -deploy -targets AdminServer -verbose /opt/wls1035_osb11115/admin/apps/xmlpserver [java] <23/02/2012 6:49:24 PM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, xmlpserver [archive: /opt/wls1035_osb11115/admin/apps/xmlpserver], to AdminServer .> [java] Task 0 initiated: [Deployer:149026]deploy application xmlpserver on AdminServer. [java] Task 0 completed: [Deployer:149026]deploy application xmlpserver on AdminServer. [java] Target state: deploy completed on Server AdminServer [java] Target Assignments: [java] + xmlpserver AdminServer INFO Command completed. BUILD SUCCESS |
show_config shows the properties used by ConfigNOW at runtime for a particular environment and configuration file combination, with any property references fully resolved. Any password properties will be displayed as masked ‘****’
ConfigNOW show_config <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to show configuration properties for |
| config | Yes | Configuration file to use to show configuration properties |
None
|
os_prompt> ConfigNOW show_config local simple INFO Loading configuration from file: config\environments\local\simple.properties INFO WLST support: False INFO Running command from jython file: core\commands\show_config.py Configuration properties are: config_file_location=config\environments\local\simple.properties nodemanager.arguments= nodemanager.crashrecovery=true nodemanager.logcount=10 nodemanager.loglimit=10000 nodemanager.password=**** nodemanager.username=weblogic redback.version=N/A validation=on wl.host=localhost wls.admin.listener.address=localhost wls.admin.listener.port=7001 wls.admin.name=as wls.admin.password=**** wls.admin.startup.timeout=20 wls.admin.username=weblogic wls.admin.vmarguments=-Xms512m -Xmx1024m wls.bea.home=c:/oracle/middleware wls.domain.dir=c:/oracle/middleware/domains wls.domain.javahome=c:/oracle/middleware/jdk160_18 wls.domain.machine.machine1.name=machine1 wls.domain.machine.machine1.nodemanager.address=localhost wls.domain.machine.machine1.nodemanager.port=5002 wls.domain.machine.machine1.nodemanager.type=Plain wls.domain.machine.machine1.postBindGID=nobody wls.domain.machine.machine1.postBindGIDEnabled=false wls.domain.machine.machine1.postBindUID=nobody wls.domain.machine.machine1.postBindUIDEnabled=false wls.domain.machine.machine1.type=UnixMachine wls.domain.machines=machine1 wls.domain.mode=prod wls.domain.name=my_domain wls.name=wlserver_10.3 wls.oracle.home=c:/oracle/middleware wls.server.as.enableHostnameVerification=false wls.server.as.listener.address=localhost wls.server.as.machine=machine1 wls.server.as.name=as wls.servers=as wls.templates= INFO Command completed. BUILD SUCCESS |
show_config_lineage shows the properties used by ConfigNOW at runtime for a particular environment including the data linage of how the property was established and where the value has been inherited from. Any property references are fully resolved and any password properties will be displayed as masked ‘****’
ConfigNOW show_config_lineage <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to show configuration properties for |
| config | Yes | Configuration file to use to show configuration properties |
None
|
os_prompt> ConfigNOW show_config_lineage local simple_inherit INFO Loading configuration from file: config\environments\local\simple_inherit.properties INFO decrypting passwords in base file first: config/templates/wl_as_template_stripped.properties INFO WLST support: False INFO Running command from jython file: core\commands\show_config_linage.py Data linage for this configuration is: [base.wls.domain.machine.name] Defined In : config\environments\local\simple_inherit.properties [Value=machine1] --> Inherited From : config/templates/wl_as_template_stripped.properties [Value=machine1] [base.wls.domain.machine.nodemanager.address] Defined In : config\environments\local\simple_inherit.properties [Value=${wl.host}] --> Inherited From : config/templates/wl_as_template_stripped.properties [Value=${wl.host}] [base.wls.domain.machine.nodemanager.port] Defined In : config\environments\local\simple_inherit.properties [Value=5002] --> Inherited From : config/templates/wl_as_template_stripped.properties [Value=5002] [base.wls.domain.machine.nodemanager.type] Defined In : config\environments\local\simple_inherit.properties [Value=Plain] --> Inherited From : config/templates/wl_as_template_stripped.properties [Value=Plain] [=========================================] [SOME TEXT REMOVED HERE TO SHORTEN EXAMPLE] [=========================================] INFO Command completed. BUILD SUCCESS |
shutdown_all_servers stops all running servers in a domain, via contacting the admin server. This command will not perform correctly if the administration server for a domain is currently down.
ConfigNOW shutdown_all_servers <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate domain |
| config | Yes | Configuration file to use to locate domain to stop all servers for |
| Property | Required | Description |
|---|---|---|
| wls.servers | Yes | Comma-separated list of server IDs to shut down. |
| wls.server.<server>.name | Yes | Actual name of server to shut down |
| wls.server.AdminServer.name | Yes | Name of administration server. Used to ensure admin server is shut down last. |
wls.servers=AdminServer,soa_server1
wls.server.AdminServer.name=as
wls.server.soa_server1.name=soa_server1
|
os_prompt> ./ConfigNOW.sh shutdown_all_servers local soa11g found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO ========================================================================= INFO This version of ConfigNOW 4.1 is a Release Candidate and as such will INFO expire on the 3rd of August 2012. At this time a subsequent Release INFO Candidate or the final release will be available on our website at: INFO http://www.integraltech.com.au INFO ========================================================================= INFO Loading configuration from file: config/environments/local/soa11g.properties INFO setenv file verified. INFO WLST support: True INFO Running command from jython file: custom/commands/shutdown_all_servers.py INFO Establishing connection to Admin Server at URL [t3://localhost:7002], attempt #1 Connecting to t3://localhost:7002 with userid weblogic ... Successfully connected to Admin Server 'soa_as' that belongs to domain 'soa_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime) INFO Sending shutdown command to server 'soa_server1' Shutting down the server soa_server1 with force=true while connected to soa_as ... ..................................INFO ..not sending shutdown command to server 'bam_server1' due to state of 'SHUTDOWN' INFO ..not sending shutdown command to server 'wsm_server1' due to state of 'SHUTDOWN' INFO Sending shutdown command to admin server 'soa_as' Shutting down the server soa_as with force=true while connected to soa_as ... .Disconnected from weblogic server: soa_as Disconnected from weblogic server: INFO Command completed. BUILD SUCCESS |
start_composite starts a previously stopped composite, allowing it to resume processing.
ConfigNOW start_composite <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.name | Yes | Name of composite to start |
| composite.revision | Yes | Revision of composite to start |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.name=HelloWorld
composite.revision=1.0
|
os_prompt> ./ConfigNOW.sh start_composite local soa11g -Dcomposite.name=HelloWorld -Dcomposite.revision=1.0 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command start_composite as ant target in build file: core/commands/ant/composite-mgmt.xml start_composite: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. startComposite: [input] skipping input as property host has already been set. [input] skipping input as property port has already been set. [input] skipping input as property user has already been set. [secure-input] skipping secure-input as property password has already been set. INFO skipping secure-input as property password has already been set. [input] skipping input as property compositeName has already been set. [input] skipping input as property revision has already been set. [echo] oracle.home = /opt/wls1035_native/soa/bin/.. compositeMgrTask: [java] Connecting to: service:jmx:t3://localhost:8001/jndi/weblogic.management.mbeanservers.runtime [java] connection initiated [java] Composite (default/HelloWorld!1.0) is successfully started. INFO Command completed. BUILD SUCCESS |
start_wls_admin starts the administration server for a WebLogic Server domain, using the domain’s startWebLogic.sh or startWebLogic.cmd start script. Output from the server starting is displayed to screen, but the terminal used to run the command can be safely closed without interrupting the administration server.
ConfigNOW start_wls_admin <env> <config>
| Property | Required | Description |
|---|---|---|
| Env | Yes | Environment to use to start WebLogic admin server |
| Config | Yes | Configuration file to use to locate WebLogic admin server to start |
| Property | Required | Description |
|---|---|---|
| wls.admin.listener.address | Yes | Host name administration server is configured to listen on |
| wls.admin.listener.port | Yes | Port administration server is configured to bind to for receiving network requests |
| wls.admin.name | Yes | Name of administration server |
| wls.domain.dir | Yes | Parent directory domain is installed under |
| wls.domain.name | Yes | Name of domain |
| wls.admin.startup.timeout | Yes | Number of minutes ConfigNOW will wait for administration server to boot successfully |
|
os_prompt> ./ConfigNOW.sh start_wls_admin local wls1035 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/wls1035.properties INFO setenv file verified. INFO WLST support: True INFO Running command start_wls_admin as ant target in build file: core/commands/ant/weblogic-common.xml validate.admin.config: [echo] WebLogic Domain Name: simple_domain [echo] WebLogic Domain Directory: /opt/wls1035/domains [echo] WebLogic Admin Server Name: as [echo] WebLogic Admin Listener Address: localhost [echo] WebLogic Admin Listener Port: 7001 start_wls_admin: start-server: [echo] Starting server as [echo] Waiting for server to start... Will wait 20 minutes [exec] . [exec] . [exec] JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=128m [exec] . [exec] WLS Start Mode=Production [exec] . [exec] CLASSPATH=/opt/wls1034/patch_wls1034/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/jdk1.6.0_25/lib/tools.jar:/opt/wls1034/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/wls1034/wlserver_10.3/server/lib/weblogic.jar:/opt/wls1034/modules/features/weblogic.server.modules_10.3.4.0.jar:/opt/wls1034/wlserver_10.3/server/lib/webservices.jar:/opt/wls1034/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/opt/wls1034/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/wls1034/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/wls1034/wlserver_10.3/server/lib/xqrl.jar:/opt/wls1034/patch_wls1034/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/jdk1.6.0_25/lib/tools.jar:/opt/wls1034/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/wls1034/wlserver_10.3/server/lib/weblogic.jar:/opt/wls1034/modules/features/weblogic.server.modules_10.3.4.0.jar:/opt/wls1034/wlserver_10.3/server/lib/webservices.jar:/opt/wls1034/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/opt/wls1034/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/wls1034/wlserver_10.3/server/lib/weblogic.jar [exec] . [exec] PATH=/opt/wls1034/wlserver_10.3/server/bin:/opt/wls1034/modules/org.apache.ant_1.7.1/bin:/opt/jdk1.6.0_25/jre/bin:/opt/jdk1.6.0_25/bin:/opt/wls1034/wlserver_10.3/server/bin:/opt/wls1034/modules/org.apache.ant_1.7.1/bin:/opt/jdk1.6.0_25/jre/bin:/opt/jdk1.6.0_25/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/jdk1.6.0_25/bin [exec] . [exec] *************************************************** [exec] * To start WebLogic Server, use a username and * [exec] * password assigned to an admin-level user. For * [exec] * server administration, use the WebLogic Server * [exec] * console at http://hostname:port/console * [exec] *************************************************** [exec] starting weblogic with Java version: [exec] java version "1.6.0_25" [exec] Java(TM) SE Runtime Environment (build 1.6.0_25-b06) [exec] Java HotSpot(TM) Server VM (build 20.0-b11, mixed mode) [exec] Starting WLS with line: [exec] /opt/jdk1.6.0_25/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=128m -Dweblogic.Name=as -Djava.security.policy=/opt/wls1034/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Xverify:none -da -Dplatform.home=/opt/wls1034/wlserver_10.3 -Dwls.home=/opt/wls1034/wlserver_10.3/server -Dweblogic.home=/opt/wls1034/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/wls1034/patch_wls1034/profiles/default/sysext_manifest_classpath weblogic.Server [exec] <20/07/2011 2:33:13 PM EST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true> [exec] <20/07/2011 2:33:13 PM EST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true> [exec] <20/07/2011 2:33:13 PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 20.0-b11 from Sun Microsystems Inc.> [exec] <20/07/2011 2:33:14 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 > [exec] <20/07/2011 2:33:16 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> [exec] <20/07/2011 2:33:16 PM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> [exec] <20/07/2011 2:33:16 PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/wls1035/domains/simple_domain/servers/as/logs/as.log is opened. All server side log events will be written to this file.> [exec] <20/07/2011 2:33:20 PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> [exec] <20/07/2011 2:33:20 PM EST> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: /opt/wls1035/domains/simple_domain/servers/as/security/boot.properties> [exec] <20/07/2011 2:33:23 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> [exec] <20/07/2011 2:33:23 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> [exec] 20/07/2011 2:33:29 PM com.sun.faces.config.ConfigureListener contextInitialized [exec] INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console' [exec] 20/07/2011 2:33:29 PM com.sun.faces.config.ConfigureListener contextInitialized [exec] INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console' [exec] <20/07/2011 2:33:30 PM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> [exec] <20/07/2011 2:33:31 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> [exec] <20/07/2011 2:33:31 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> [exec] <20/07/2011 2:33:31 PM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.> [exec] <20/07/2011 2:33:31 PM EST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "as" for domain "simple_domain" running in Production Mode> [echo] Server started listening at port [7001] or [7001]. INFO Command completed. BUILD SUCCESS |
start_composite stops a running composite, keeping it deployed but not actively processing requests
ConfigNOW start_composite <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.name | Yes | Name of composite to stop |
| composite.revision | Yes | Revision of composite to stop |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.name=HelloWorld
composite.revision=1.0
|
os_prompt> ./ConfigNOW.sh start_composite local soa11g -Dcomposite.name=HelloWorld -Dcomposite.revision=1.0 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO ========================================================================= INFO This version of ConfigNOW 4.1 is a Release Candidate and as such will INFO expire on the 3rd of August 2012. At this time a subsequent Release INFO Candidate or the final release will be available on our website at: INFO http://www.integraltech.com.au INFO ========================================================================= INFO Loading configuration from file: config/environments/local/soa11g.properties INFO setenv file verified. INFO WLST support: True INFO Running command start_composite as ant target in build file: core/commands/ant/composite-mgmt.xml start_composite: [echo] oracle.home = /opt/wls1035/soa/bin/.. startComposite: [input] skipping input as property host has already been set. [input] skipping input as property port has already been set. [input] skipping input as property user has already been set. [secure-input] skipping secure-input as property password has already been set. INFO skipping secure-input as property password has already been set. [input] skipping input as property compositeName has already been set. [input] skipping input as property revision has already been set. [echo] oracle.home = /opt/wls1035/soa/bin/.. compositeMgrTask: [java] Connecting to: service:jmx:t3://localhost:8051/jndi/weblogic.management.mbeanservers.runtime [java] connection initiated [java] Composite (default/HelloWorld!1.0) is successfully started. INFO Command completed. BUILD SUCCESS |
stop_wls_admin stops the administration server for a domain if it is running currently.
ConfigNOW stop_wls_admin <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to show configuration properties for |
| config | Yes | Configuration file to use to show configuration properties |
| Property | Required | Description |
|---|---|---|
| wls.admin.listener.address | Yes | Host name administration server is configured to listen on |
| wls.admin.listener.port | Yes | Port administration server is configured to bind to for receiving network requests |
| wls.admin.name | Yes | Name of administration server |
| wls.domain.dir | Yes | Parent directory domain is installed under |
| wls.domain.name | Yes | Name of domain |
|
os_prompt> ./ConfigNOW.sh stop_wls_admin local wls1035 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/wls1035.properties INFO setenv file verified. INFO WLST support: True INFO Running command stop_wls_admin as ant target in build file: core/commands/ant/weblogic-common.xml validate.admin.config: [echo] WebLogic Domain Name: simple_domain [echo] WebLogic Domain Directory: /opt/wls1035/domains [echo] WebLogic Admin Server Name: as [echo] WebLogic Admin Listener Address: localhost [echo] WebLogic Admin Listener Port: 7001 stop_wls_admin: stop-server: [echo] Stopping server as [echo] Waiting for admin server to stop.. Will wait 2 minutes [exec] Stopping Weblogic Server... [exec] Initializing WebLogic Scripting Tool (WLST) ... [exec] Welcome to WebLogic Server Administration Scripting Shell [exec] Type help() for help on available commands [exec] Connecting to t3://localhost:7001 with userid weblogic ... [exec] Successfully connected to Admin Server 'as' that belongs to domain 'simple_domain'. [exec] Warning: An insecure protocol was used to connect to the [exec] server. To ensure on-the-wire security, the SSL port or [exec] Admin port should be used instead. [exec] Shutting down the server as with force=false while connected to as ... [echo] WebLogic admin server has been stopped. INFO Command completed. BUILD SUCCESS |
undeploy_composite undeploys an SCA composite from a SOA Suite domain.
ConfigNOW undeploy_composite <env> <config>
| Property | Required | Description |
|---|---|---|
| env | Yes | Environment to use to locate SOA Suite domain |
| config | Yes | Configuration file to use to locate SOA Suite domain |
| Property | Required | Description |
|---|---|---|
| soa.host | Yes | Hostname used to locate SOA Suite server |
| wls.server.soa_server1.listener.port | Yes | Port SOA Suite server (named ‘soa_server1’ by default) is listening on |
| wls.admin.username | Yes | Administration user used to connect to domain |
| wls.admin.password | Yes | Password for administration user |
| composite.name | Yes | Name of composite to undeploy |
| composite.revision | Yes | Specific revision of composite to undeploy |
soa.host=localhost
wls.server.soa_server1.listener.port=8001
wls.admin.username=weblogic
wls.admin.password={AES}AHphcSZJOITrczv/9889iw==dw25kxa86GAb9gRukVf2eg==
composite.name=HelloWorld
composite.revision=2.0
|
os_prompt> ./ConfigNOW.sh undeploy_composite local composites_example -Dcomposite.name=HelloWorld -Dcomposite.revision=2.0 found setenv.sh Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands INFO Loading configuration from file: config/environments/local/composites_example.properties INFO decrypting passwords in base file first: config/environments/local/soa11g.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/simple/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO decrypting passwords in base file first: config/templates/soa11g_template.properties INFO setenv file verified. INFO WLST support: True INFO Running command undeploy_composite as ant target in build file: core/commands/ant/composite-mgmt.xml undeploy_composite: [echo] oracle.home = /opt/wls1035_native/soa/bin/.. undeploy: [input] skipping input as property serverURL has already been set. [input] skipping input as property compositeName has already been set. [input] skipping input as property revision has already been set. setting user/password..., user=weblogic compositeDN =default/HelloWorld!2.0 INFO: Creating HTTP connection to host:localhost, port:8001 INFO: Received HTTP response from the server, response code=200 ---->Undeploy composite success. INFO Command completed. BUILD SUCCESS |