[Regression] 580.105.08: DisplayPort monitor limited to 1920x1080 instead of native 2560x1440

[darklenre]

NVIDIA Open GPU Kernel Modules Version

580.105.08

Please confirm this issue does not happen with the proprietary driver (of the same version). This issue tracker is only for bugs specific to the open kernel driver.

• I confirm that this does not happen with the proprietary driver package.

Operating System and Version

CachyOS

Kernel Release

6.17.7-3-cachyos

Please confirm you are running a stable release kernel (e.g. not a -rc). We do not accept bug reports for unreleased kernels.

• I am running on a stable kernel release.

Hardware: GPU

NVIDIA RTX A2000 12GB

Describe the bug

Bug Report

NVIDIA Driver Version: 580.105.08
Previous Working Version: 580.95.05
GPU: NVIDIA RTX A2000 12GB
OS: CachyOS (Arch-based)
Kernel: 6.17.7
Display Server: Wayland (KDE Plasma 6.5.1)
Monitor: Lenovo ThinkVision T27h-30 (2560x1440 native)
Connection: Mini-DisplayPort to DisplayPort

Issue

After updating from driver 580.95.05 to 580.105.08, my DisplayPort-connected monitor is limited to 1920x1080 maximum resolution instead of its native 2560x1440@60Hz.

Evidence

• EDID correctly reports 2560x1440 as preferred mode
• /sys/class/drm/card1-DP-1/modes shows maximum 1920x1080
• edid-decode confirms monitor advertises 2560x1440@60Hz
• Downgrading to 580.95.05 resolves the issue

Reproduction

1. Update nvidia-utils to 580.105.08
2. Connect 2560x1440 DisplayPort monitor
3. Check available resolutions - maximum is 1920x1080

Related Reports

Multiple users affected: https://discuss.cachyos.org/t/after-updating-linux-cachyos-nvidia-linux-cachyos-rc-nvidia-linux-cachyos-lts-nvidia-nvidia-driver-version-580-105-08-the-dual-screen-display-resolution-is-incorrect/18057

https://discuss.cachyos.org/t/suddenly-missing-higher-resolution-on-second-monitor/18101/14

To Reproduce

1. Update nvidia-utils to 580.105.08
2. Connect 2560x1440 DisplayPort monitor
3. Check available resolutions - maximum is 1920x1080

Bug Incidence

Always

nvidia-bug-report.log.gz

nvidia-bug-report.log.gz

More Info

No response

[CapnArrys]

I'm also experiencing this same issue, 2560x1080@75Hz limited to 1920x1080@60Hz on HDMI after this update, GPU : NVIDIA RTX 4070

[Lecer69]

I also can confirm this issue, after I uninstalled nvidia drivers, to let integraded amd graphics to work, it completely detected the monitor, the modes, the id, the model and etc, but after installing them again, its unable to detect the monitor, and the monitor model id changes to nvidia 0x0000, which is wrong, and it will be locked on 640x480@60Hz resolution.

GPU: RTX 3050

hyprctl monitors:
with nvidia drivers:

Monitor DP-1 (ID 1):
640x480@59.94000 at 440x993
description: Nvidia 0x0000
make: Nvidia
model: 0x0000
physical size (mm): 0x0
serial:
active workspace: 4 (4)
special workspace: 0 ()
reserved: 0 45 0 0
scale: 1.00
transform: 0
focused: no
dpmsStatus: 1
vrr: false
solitary: 0
solitaryBlockedBy: windowed mode,missing candidate
activelyTearing: false
tearingBlockedBy: next frame is not torn,missing candidate
directScanoutTo: 0
directScanoutBlockedBy: user settings,missing candidate
disabled: false
currentFormat: XRGB8888
mirrorOf: none
availableModes: 640x480@59.94Hz

without nvidia drivers (forcing to use integraded AMD graphics):

Monitor DP-1 (ID 1):
1920x1080@60.00000 at 0x0
description: Hewlett Packard HP LA2206 3CQ151BFDD
make: Hewlett Packard
model: HP LA2206
physical size (mm): 480x270
serial: 3CQ151BFDD
active workspace: 2 (2)
special workspace: 0 ()
reserved: 0 45 0 0
scale: 1.00
transform: 3
focused: no
dpmsStatus: 1
vrr: false
solitary: 0
solitaryBlockedBy: windowed mode,missing candidate
activelyTearing: false
tearingBlockedBy: next frame is not torn,missing candidate
directScanoutTo: 0
directScanoutBlockedBy: user settings,software renders/cursors,missing candidate
disabled: false
currentFormat: XRGB8888
mirrorOf: none
availableModes: 1920x1080@60.00Hz 1680x1050@59.95Hz 1280x1024@60.02Hz 1440x900@59.89Hz 1280x800@60.00Hz 1280x720@60.00Hz 1024x768@60.00Hz 800x600@60.32Hz 640x480@59.94Hz 720x400@70.08Hz

[tpaananen]

Secondary monitor on HDMI limited to 1980x1080@60 when installed 580.105.08 driver on CachyOS 6.17.7-3, KDE Plasma 6.5.2. Reverting to previous version 580.95.05 resolved the issue for me and now the display is back at 2560x1440@60.

HW: Nvidia RTX 5080

[Binary-Eater]

Hi folks, thanks for reporting this regression. Apologies about the impact seen. Will try to get a repro internally to debug this. Will also look at providing possible test patches in case an internal reproduction is non-trivial for some reason.

[MKlown]

I can confirm the issue on Arch with a RTX3080Ti if it helps. Reverting drivers to previous version also solve the issue.

[RainOrigami]

I have this issue on Endeavour OS with an RTX 4090 using nvidia-dkms, Monitor HDMI-A-2 (ID 0) only supporting up to 1920x1080 while my other two monitors Monitor DP-2 (ID 1) and Monitor DP-3 (ID 2) correctly function in 2560x1440. Reverting to 580.95.05-1 has resolved the issue.

You can tell at boot (nvidia-drm.modeset=1) where the boot process log only shows up on 3/4 of the screen on DP-2 and DP-3 because it is limited by the resolution of HDMI-A-2.

[care]

Same issue with 580.95.05 upgrade to 580.105.08 on Arch, using a 1060. Interestingly, the wallpaper on this machine was never set and the default was black (probably set by nvidia conf?), but now after the upgrade it is white. Monitors are the exact same, and only one is capped to 60hz.

[Centopus]

I just installed this last night and had to go back to 580.95.05. Because I boot to black screen with cursor blinking. Does not even get the GDM.

nvidia-drm.modeset=0 lets me boot in low resolution to make a downgrade.

Haven't got the knowledge to probe what is happening. But I'm able to boot in low resolution to make downgrade.
Got Arch, 4070Ti and 1 DisplayPort 4k Monitor and another HDMI 4k one. Aligns with what has been said before.

PS. If you require more information from me, please give detailed instructions and I shall provide.

[MesuDevastator]

Same issue here with 580.105.08 RTX 4060 on Arch Linux, where 2560x1440@75Hz is capped to 1920x1080@60Hz.

Using the closed source driver still reproduces the issue.

[abhilashdwarakanath-dot]

I can confirm this issue on Manjaro. I was under the impression that Manjaro provided both the proprietary and the -open versions, and I explicitly installed the version without the -open tag, and yet I am facing the same issue. My driver version shows 580.105.08

[nicolas-s]

Same issue for me with 580.105.08 and RTX 5070 Ti on Arch Linux.
The previous 2560x1440@60Hz is now limited to 2048x1080@60Hz.

[mtijanic]

Tracked as nvbug 5651624. Also, #959 is a possible duplicate.