Data not getting updated

[aviz1991]

Hi Team,

I'm currently working on a POC for the openBMP,I have faced on issue where after the bmp config is removed from the device(router) that information is not getting updated in the grafana and just says the device is down.I have tried to check the pssql db as well the term_reason_text says "connection closed" or "65534 | ERROR: Cannot read v3 BMP common header." but that information regarding that device is still getting showed up in grafana,Can you please help me on this?
Is this expected behaviour?

a1e221dc-7231-71cc-601b-8090d944fd6e | r-drf-router-1-2 | 10.2.2.185 | | 2023-02-09 00:03:58.741501 | Nexus9000 C9504 (4 Slot) Chassis, Software Version 9.3(10)I9(1) | down | f | 65534 | (2) ### Connection closed | | | 0.0.0.0/0 | 91e3a7ff-9f56-76ed-6ae6-fcd8a6b455ec |

[TimEvens]

So the only issue is that the router entry shows up as down when you are getting updates in the DB?

[aviz1991]

Hi Tim,

Appreciate your response.There are 2 things

1.When I remove the bmp config from the peer level in the device(router) I expected bmp to remove the peer details in the grafana as well,But it doesn't,Instead it shows as down. So this is not correct information as the peer is up just that i have removed the bmp config on that peer.
2.Here I want to remove the whole BMP config from the device,here the grafana shows the device as down in the inventory,in true sense device is up just that the bmp config is removed and I expected the device should no longer be seen in the grafana dashboard.

Need help in above 2 scenarios,Again appreciate your help.
Thanks

[aviz1991]

Hi @TimEvens, Can you please help me out with this issue?
Is this only me or anyone else also facing this issue?
Thanks

[aviz1991]

Hi @TimEvens,Can you please help me out?

Thanks!