Add a separate set of styluses (Stylus_60mm, Stylus_100mm) with a hole at the tip, where we can glue a pin/nail.

[Sunderlandkyl]

3D printed stylus is pretty good still sometimes might be worth to put at the end a metal tip, sharper and that does not break. Because the one used has been pivoted so many times that the tip is not so sharp anymore.

Migrated from https://app.assembla.com/spaces/plus/tickets/938/details

[Sunderlandkyl]

2014-09-26 11:06
Andras Lasso
Instead of gluing we could create a hole where standard high-precision indicator tips (sharp or sphere) could be inserted.

For example, one of these:
http://www.mcmaster.com/#indicator-tips/