Added wiringpi installation instructions to readme

DisplayNixie/README.md

@@ -1,4 +1,5 @@
 # NixieClockRaspberryPi
+
 ## With mods by Leon Shaner
 
 Simple Nixie Tubes Clock Based on RaspberryPi, adapter and NCS314 shield for Arduino (by GRA and AFCH)
@@ -8,63 +9,74 @@ NOTE: Works with NCS314 v2.x or NCS312; has not been tested with newer models (a
 
 ### Major features of the Shaner mods:
 
-  1) Use the system RTC by default (e.g. rely on NTP for more accurate time).
-  2) Option to display 12-hour or 24-hour for the hour digits.
-  3) Repurpose MODE button to toggle fireworks on/off.
-  4) Repurpose UP/DOWN buttons to increase/decrease the fireworks cycle speed.
-  5) Command-line parsing to choose preferred options without recompile.
-  6) Re-wrote makefile for proper handling of binary rebuild any time the sources are modified.
+1. Use the system RTC by default (e.g. rely on NTP for more accurate time).
+2. Option to display 12-hour or 24-hour for the hour digits.
+3. Repurpose MODE button to toggle fireworks on/off.
+4. Repurpose UP/DOWN buttons to increase/decrease the fireworks cycle speed.
+5. Command-line parsing to choose preferred options without recompile.
+6. Re-wrote makefile for proper handling of binary rebuild any time the sources are modified.
+
+### Wiringpi library
+
+Before doing the build instructions below follow these steps to install the wiringpi library as it is no longer included in repos as of Bookworm
+
+1. Download the most recent precompiled armhf binary from https://github.com/WiringPi/WiringPi/releases:
+   `curl -L -o wiringpi_3.2_arm64.deb https://github.com/WiringPi/WiringPi/releases/download/3.2/wiringpi_3.2_arm64.deb`
+2. Run: `sudo apt install ./wiringpi_3.2_arm64.deb`
 
 ### Required hardware:
-  1) Raspberry Pi any models with 40-pin GPIO connector (Except A and B models).
-  2) Arduino to Raspberry Pi adapter (by GRA & AFCH): https://gra-afch.com/catalog/shield-nixie-clock-for-arduino/raspberry-pi-shield-nixie-tubes-clock-ncs314-for-in-14-nixie-tubes-options-tubes-gps-remote-arduino-columns-copy/
-  3) Arduino Nixie Clock Shield NCS314 (v1.2, v2.x): https://gra-afch.com/catalog/shield-nixie-clock-for-arduino/nixie-tubes-clock-arduino-shield-ncs314-for-xussr-in-14-nixie-tubes/
 
+1. Raspberry Pi any models with 40-pin GPIO connector (Except A and B models).
+2. Arduino to Raspberry Pi adapter (by GRA & AFCH): https://gra-afch.com/catalog/shield-nixie-clock-for-arduino/raspberry-pi-shield-nixie-tubes-clock-ncs314-for-in-14-nixie-tubes-options-tubes-gps-remote-arduino-columns-copy/
+3. Arduino Nixie Clock Shield NCS314 (v1.2, v2.x): https://gra-afch.com/catalog/shield-nixie-clock-for-arduino/nixie-tubes-clock-arduino-shield-ncs314-for-xussr-in-14-nixie-tubes/
 
 ### How to build:
 
-  1) Download and unzip.
-  2) Enable SPI module in the "Raspberry Pi Configuration": https://photos.app.goo.gl/vH7DtG9nwMzJHwvP2
-  2.1) or CLI way "sudo raspi-config": https://photos.app.goo.gl/wfoPd8CNLSlJ0bF83
+1. Download and unzip.
+2. Enable SPI module in the "Raspberry Pi Configuration": https://photos.app.goo.gl/vH7DtG9nwMzJHwvP2
+   2.1) or CLI way "sudo raspi-config": https://photos.app.goo.gl/wfoPd8CNLSlJ0bF83
 
-  3) cd into .../DisplayNixie/src
-  4) Run 'make'
-  5) Binary will be placed at .../DisplayNixie/bin/DisplayNixie, a la:
-	/nixie/NixieClockRaspberryPi-shaner/DisplayNixie/bin/DisplayNixie
+3. cd into .../DisplayNixie/src
+4. Run 'make'
+5. Binary will be placed at .../DisplayNixie/bin/DisplayNixie, a la:
+   /nixie/NixieClockRaspberryPi-shaner/DisplayNixie/bin/DisplayNixie
 
 ### Сommand line options (shaner mods):
-* USAGE: DisplayNixie     -- Use system clock in 12-hour mode.
-* DisplayNixie nosysclock -- use Nixie clock (e.g. not NTP assisted).
-* DisplayNixie 24hour     -- use 24-hour mode.
-* DisplayNixie fireworks  -- enable fireworks.
 
-NOTE:  Any combination/order of above arguments is allowed.
+- USAGE: DisplayNixie -- Use system clock in 12-hour mode.
+- DisplayNixie nosysclock -- use Nixie clock (e.g. not NTP assisted).
+- DisplayNixie 24hour -- use 24-hour mode.
+- DisplayNixie fireworks -- enable fireworks.
 
-### Run-time options (shaner mods):
+NOTE: Any combination/order of above arguments is allowed.
 
-* MODE Button:  Toggle fireworks on/off
-* UP Button:    Speed up fireworks color-rotation
-* DOWN Button:  Slow down fireworks color-rotation
+### Run-time options (shaner mods):
 
+- MODE Button: Toggle fireworks on/off
+- UP Button: Speed up fireworks color-rotation
+- DOWN Button: Slow down fireworks color-rotation
 
-### Autorun the program at startup: 
+### Autorun the program at startup:
 
-1) Edit the provided nixie.service template to reflect the full path down to your binary:
+1. Edit the provided nixie.service template to reflect the full path down to your binary:
 
 NOTE: Fix the path on the following line in nixie.service to match your binary location.
 
-  ExecStart=/nixie/NixieClockRaspberryPi-shaner/DisplayNixie/bin/DisplayNixie
+ExecStart=/nixie/NixieClockRaspberryPi-shaner/DisplayNixie/bin/DisplayNixie
+
+2. Copy your customized nixie.service into the /etc/systemd/system directory:
+
+- $ sudo cp nixie.service /etc/systemd/system
+
+3. Reload the systemd state and start the nixie service:
 
-2) Copy your customized nixie.service into the /etc/systemd/system directory:
-*  $ sudo cp nixie.service /etc/systemd/system
+- $ sudo systemctl daemon-reload
+- $ sudo systemctl enable nixie
+- $ sudo systemctl start nixie
 
-3) Reload the systemd state and start the nixie service:
-*  $ sudo systemctl daemon-reload
-*  $ sudo systemctl enable nixie
-*  $ sudo systemctl start nixie
+NOTE: The systemd will auto-start DisplayNixie whenever the system is booted.
 
-NOTE:  The systemd will auto-start DisplayNixie whenever the system is booted.
+4. To stop and/or restart the nixie binary at any time:
 
-4) To stop and/or restart the nixie binary at any time:
-*  $ sudo systemctl stop nixie
-*  $ sudo systemctl restart nixie
+- $ sudo systemctl stop nixie
+- $ sudo systemctl restart nixie