Fixed stepper_y positions and added BED_MESH_CALIBRATE in print_start #35
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Actual config file put X0 Y0 outside the bed. I talk about this here : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/Klipper_Macros#about-the-modded-keybak-mount-and-the-endstop-microswitch-located-at-z_min-or-sensorless-homing-at-z_min-and-y-travel This fix should put Y0 on the bed, just over the 2 little holes often founds on flex sheets. The positions works for a BOM VSW with an LDO MK52 heated bed. I also added a BED_MESH_CALIBRATE after initial homing in print_start. We can't really do without one over at VSW.
Author
|
Changed stepper_z homing_speed to 20 and added speed parameter set to 10 in probe section. It helps with a lot of inconsistencies people tend to have in relation of the z_offset |
philbert440
approved these changes
Jun 22, 2023
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Actual config file put X0 Y0 outside the bed. I talk about this here : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/Klipper_Macros#about-the-modded-keybak-mount-and-the-endstop-microswitch-located-at-z_min-or-sensorless-homing-at-z_min-and-y-travel
This fix should put Y0 on the bed, just over the 2 little holes often founds on flex sheets. The positions works for a BOM VSW with an LDO MK52 heated bed.
I also added a BED_MESH_CALIBRATE after initial homing in print_start. We can't really do without one over at VSW.