[Task]: Pass sdk wheel instead of tarball for Python Dataflow PostCommit

[Abacn]

What needs to happen?

Currently, Python PostCommit use --sdk_location to upload the Python SDK subjected to testing to Dataflow. It is found that building the wheels for the SDK is very slow:

2023/03/24 15:31:16 Executing: /usr/local/bin/pip install --disable-pip-version-check /var/opt/google/staged/dataflow_python_sdk.tar[gcp]
2023/03/24 15:31:16 Processing /var/opt/google/staged/dataflow_python_sdk.tar
2023/03/24 15:31:17 Preparing metadata (setup.py): started
2023/03/24 15:31:35 Preparing metadata (setup.py): finished with status 'done'
2023/03/24 15:31:37 Building wheels for collected packages: apache-beam
2023/03/24 15:31:37 Building wheel for apache-beam (setup.py): started
2023/03/24 15:32:42 Building wheel for apache-beam (setup.py): still running...
2023/03/24 15:33:44 Building wheel for apache-beam (setup.py): still running...
2023/03/24 15:34:49 Building wheel for apache-beam (setup.py): still running...
2023/03/24 15:35:04 Building wheel for apache-beam (setup.py): finished with status 'done'
2023/03/24 15:35:04 Successfully built apache-beam
2023/03/24 15:35:04 Installing collected packages: apache-beam
2023/03/24 15:35:07 Successfully installed apache-beam-2.47.0.dev0

it takes 4 minutes to install apache beam from source, where 3 and half minutes is used to build the wheel. It should be able to build a wheel locally, whenever possible (host machine generates manylinux wheel, which is the case of Jenkins). This would cut the running time of Python PostCommit on Dataflow by half.

Issue Priority

Priority: 2 (default / most normal work should be filed as P2)

Issue Components

• Component: Python SDK
• Component: Java SDK
• Component: Go SDK
• Component: Typescript SDK
• Component: IO connector
• Component: Beam examples
• Component: Beam playground
• Component: Beam katas
• Component: Website
• Component: Spark Runner
• Component: Flink Runner
• Component: Samza Runner
• Component: Twister2 Runner
• Component: Hazelcast Jet Runner
• Component: Google Cloud Dataflow Runner

[AnandInguva]

@Abacn are you working on this?

[Abacn]

Hi @AnandInguva, do you think this is a reasonable request? If so I would like to work on this, also CC: @tvalentyn

[tvalentyn]

I think replicating 81af13c in Dataflow-owned containers would reduce the time to build a wheel to 20 seconds. (installation from a wheel might still be much faster, perhaps around 3 seconds).

Note: We are also planning to switch Dataflow Python to use Beam-provided containers next quarter.

[tvalentyn]

Thanks Yi for the suggestion. building a wheel for a Dataflow integration test suite, that builds an SDK once and runs a suite of Pipelines makes sense and can save some time, although the above suggestion is a shorter path to achieve more of the gain. We should have patched that commit earlier.

Care should be taken to build the wheel for the correct target platform and correct python version. If build happens on Jenkins/GH action, build environment is somewhat predeterimined. However forcing users to build the wheel locally every time they run a gradle task may add some friction (needs extra dependencies, increases build the time, will it work well on macs or different deps needed?).

Note there are also slight differences in wheel naming pattern between py37 and py38.

[Abacn]

Thanks @tvalentyn given that

• replicating [BEAM-8544] Use ccache for compiling the Beam Python SDK. #9966 in Dataflow-owned containers would reduce the time
• planning to switch Dataflow Python to use Beam-provided containers next quarter

there is no need to change Dataflow-owned containers at this moment. Could come back when the switch is done to see if this task still values.

[Abacn]

Using beam provided container image (--sdk_container_image=gcr.io/apache-beam-testing/beam-sdk/beam_python3.10_sdk:latest), re-installation of the SDK is somewhat faster,
however still takes 2min30s (1 minutes faster than default, Dataflow provided image). Building the wheel takes 2min20s.

jobId: 2023-03-27_14_11_55-1971041453326172975

2023-03-27 17:15:14.903 EDT 2023/03/27 21:15:14 Found artifact: dataflow_python_sdk.tar
2023-03-27 17:15:14.903 EDT 2023/03/27 21:15:14 Installing setup packages ...
2023-03-27 17:15:15.444 EDT Processing /var/opt/google/staged/dataflow_python_sdk.tar
2023-03-27 17:15:15.937 EDT Preparing metadata (setup.py): started
2023-03-27 17:15:19.149 EDT Preparing metadata (setup.py): finished with status 'done'
...
2023-03-27 17:15:20.042 EDT Building wheels for collected packages: apache-beam
2023-03-27 17:15:20.043 EDT Building wheel for apache-beam (setup.py): started
2023-03-27 17:16:40.346 EDT Building wheel for apache-beam (setup.py): still running...
2023-03-27 17:17:39.535 EDT Building wheel for apache-beam (setup.py): finished with status 'done'
...
2023-03-27 17:17:39.559 EDT Successfully built apache-beam
2023-03-27 17:17:40.178 EDT Installing collected packages: apache-beam
...
2023-03-27 17:17:42.247 EDT Successfully installed apache-beam-2.47.0.dev0

based on this experiment #25970 could still save 2.5 minutes per test for Beam provided image (that uses ccache).

[tvalentyn]

I see, thanks for correction. I also did my own tests before replying above, they looked like the following:

docker run --rm -it --entrypoint=/bin/bash apache/beam_python3.7_sdk:2.45.0
root@577f14daaa3f:/# pip uninstall apache-beam
root@577f14daaa3f:/# wget https://files.pythonhosted.org/packages/09/07/a8cef9d9193a65f7d7a35d72b46c97cc3684eea7b7728a89f5accbb5f297/apache-beam-2.45.0.zip
root@577f14daaa3f:/# time pip install ./apache-beam-2.45.0.zip 

Successfully installed apache-beam-2.45.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv

[notice] A new release of pip is available: 23.0 -> 23.0.1
[notice] To update, run: pip install --upgrade pip

real	0m13.258s
user	0m11.930s
sys	0m2.265s

[tvalentyn]

I am not sure where the discrepancy comes from.

Repeating this same with docker run --rm -it --entrypoint=/bin/bash gcr.io/cloud-dataflow/v1beta3/python310:beam-master-20230322

shows a much slower installation:

real	2m43.945s
user	2m36.349s
sys	0m7.157s

[tvalentyn]

I don't reproduce the fast behavior on gcr.io/apache-beam-testing/beam-sdk/beam_python3.10_sdk:latest.

[tvalentyn]

on my machine it took:

real 1m24.951s
user 1m19.878s
sys 0m5.468s