极坐标系下的柱状图在有初始data时，刻度增长异常。

[anzhou99]

Version

5.2.0

Reproduction link

https://codepen.io/stjerne/pen/yLXprzZ

Steps to reproduce

极坐标系下的柱状图在有初始data时，刻度增长方向、增长值异常。（1. option中设置了clockwise为true，预期增长方向应为顺时针，实际显示却为逆时针；2. 在增长方向相反的同时，增长值也存在异常。预期应该增长10%，实际增长却为（1-10%）。

演示链接中，我模拟了有初始data值和无初始data值两种实例，请参照。

What is expected?

即使是在有初始data值的情况下，图表增长方向应与clockwise设置一致，增长值应与后续data中设置的值一致。

What is actually happening?

刻度增长方向、增长值异常。
上图为异常状态，下图为无初始data值对照。

[echarts-bot]

Hi! We've received your issue and please be patient to get responded. 🎉
The average response time is expected to be within one day for weekdays.

In the meanwhile, please make sure that it contains a minimum reproducible demo and necessary images to illustrate. Otherwise, our committers will ask you to do so.

A minimum reproducible demo should contain as little data and components as possible but can still illustrate your problem. This is the best way for us to reproduce it and solve the problem faster.

You may also check out the API and chart option to get the answer.

If you don't get helped for a long time (over a week) or have an urgent question to ask, you may also send an email to dev@echarts.apache.org. Please attach the issue link if it's a technical question.

If you are interested in the project, you may also subscribe to our mailing list.

Have a nice day! 🍵

[echarts-bot]

@anzhou99 It seems you are not using English, I've helped translate the content automatically. To make your issue understood by more people, we'd like to suggest using English next time. 🤗

TRANSLATED

TITLE

The bar chart under the polar coordinate system has an abnormal scale growth when there is an initial data.

BODY

Version

5.2.0

Reproduction link

https://codepen.io/stjerne/pen/yLXprzZ

Steps to reproduce

When the histogram in the polar coordinate system has initial data, the scale growth direction and growth value are abnormal. (1. Clockwise is set to true in the option, the expected growth direction should be clockwise, but the actual display is counterclockwise; 2. While the growth direction is opposite, the growth value is also abnormal. The expected growth should be 10%, but the actual growth Is (1-10%).

In the demo link, I simulated two instances with initial data value and without initial data value. Please refer to it.

What is expected?

Even with the initial data value, the chart growth direction should be consistent with the clockwise setting, and the growth value should be consistent with the value set in the subsequent data.

What is actually happening?

The scale growth direction and the growth value are abnormal.
The picture above is an abnormal state, and the picture below is a comparison with no initial data value.

[plainheart]

#15589 修复了该问题，可以先用 nightly 版本验证一下。5.2.1 修复版本也正在准备发布中。

[anzhou99]

验证正常，坐等发布。
感谢！