imshow() does not show picture

[GKA103]

Hi,

I was trying some image recognition but now imshow does not show the picture. No figure window opens, the program runs smoothly, no errors, imhist() works fine. It worked a couple of hours ago until Matlab R2013a crashed, I guess because calculations were a bit too complicated. It does "show" the number array in the command window if imshow(I) is called there...

Many thanks for your help!

[arokem]

Your message implies that this used to work in some previous version of
pymatbridge ("...but now..."). Is that the case? When (what commit) did it
break?

On Wed, Jan 15, 2014 at 4:20 AM, GKA103 notifications@github.com wrote:

Hi,

I was trying some image recognition but now imshow does not show the
picture. No figure window opens, the program runs smoothly, no errors,
imhist() works fine. It worked a couple of hours ago until Matlab R2013a
crashed, I guess because calculations were a bit too complicated.

Many thanks for your help!

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/35
.

[GKA103]

Its the same version only the program froze. I think because it was overloaded with complicated calculations. Afterwards the problem occured, might be coincidence. I restartet the computer multiple times, did not reinstal Matlab though.

Thanks for your help!

[arokem]

I am still not understanding fully: did imshow ever work for you? What operating system are you on?

[GKA103]

It is Windows 7. imshow worked fine in the beginning, it showed the images as it was supposed to. Then the programm window froze (probably because of too many calculations). I quit it via task manager-->stop process. After this imshow will not show pictures anymore. All other commands (that I use) work fine. I restarted Matlab and the copmuter multiple times with no change in the result. imshow still does not show anything, nor do any windows open.

[GKA103]

OK, I tried this (Code #1):

I = imread('D:\1.tif')
imshow(I);

It works. Then I run another set of code which is below (Code #2) has imshow as well and imshow does not work. Then I run the code #1 again and it does not work anymore. If I close Matlab and restart code#1 works again...

PS: the other image is there, if I just copy the path and open it via command it shows up...
Code #2:

%Loading the image

%InputFolder = 'Input folder';
%ImageNumber = 1;
%ImageName = Num2Str(ImageNumber);
%ImageFormat = 'tif';

%Image = imread(strcat(InputFolder, ImageName, '.', ImageFormat));
I = imread('Another path.jpg');
imshow = (I);
%imwrite(I, 'Another path.tif');

% Convert picture

% BackgroundSquares = 200; %Sets size of squares the background is averaged over
% ImageBackground = imerode(I, strel('square',BackgroundSquares)); %Calculates background for substraction
% ImageLeveled = double(I) - double(ImageBackground); %Substracts background
% ImageLeveled = uint8((ImageLeveled - min(ImageLeveled(:)))/(max(ImageLeveled(:)) - min(ImageLeveled(:))) * 255); %Converts back to 8bit image
% manual_threshold = 10; %Sets threshold manually for conversion
% BWImage = ImageLeveled > manual_threshold;
% BWInverted = ~BWImage; %Inverts image
% BWDilated = imdilate(BWInverted,strel('square',5)); %Dilates pixels
% imshow(BWDilated);
% imwrite(BWDilated, strcat(InputFolder, ImageName, '_bearbeitet.', ImageFormat));

%Find circles

%[centers, radii, metric] = imfindcircles(I,[100, 150],'Sensitivity',0.99);
%centersStrong5 = centers(1:1,:);
%radiiStrong5 = radii(1:1);
%metricStrong5 = metric(1:1);
%viscircles(centersStrong5, radiiStrong5,'EdgeColor','b');
% ImageNumber = ImageNumber + 1; %Goes to next image in For-loop

%BW2 = bwareaopen(J3,10)
%imshow(BW2)
%BW3 = imfill(BW2,'holes');
%imshow(BW3)

%I_leveled = I_leveled + 100;
%imshow(I_leveled,[]);

[arokem]

Hmm - I have to apologize, but I am not that great with Windows. Was there
any apparent error messages in the Matlab session? Did anything work after
running #2, or did the Matlab session crash altogether?

On Fri, Jan 17, 2014 at 7:03 AM, GKA103 notifications@github.com wrote:

OK, I tried this (Code #1#1
):

I = imread('D:\1.tif')
imshow(I);

It works. Then I run another set of code which is below (Code #2#2)
has imshow as well and imshow does not work. Then I run the code #1https://github.com/arokem/python-matlab-bridge/issues/1again and it does not work anymore. If I close Matlab and restart code#1
works again...

Code #2 #2:

%Loading the image

%InputFolder = 'X:\05 Projects\05 PG Lab-on-a-Chip\412601 ANGELab @
EU-FP7\10 Simulation\03 Image recognition\2014-01-15 Playing with
Matlab\TestPictures';
%ImageNumber = 1;
%ImageName = Num2Str(ImageNumber);

%ImageFormat = 'tif';

%Image = imread(strcat(InputFolder, ImageName, '.', ImageFormat));
I = imread('Another path.jpg');
imshow = (I);
%imwrite(I, 'Another path.tif');

% Convert picture

% BackgroundSquares = 200; %Sets size of squares the background is
averaged over
% ImageBackground = imerode(I, strel('square',BackgroundSquares));
%Calculates background for substraction
% ImageLeveled = double(I) - double(ImageBackground); %Substracts
background
% ImageLeveled = uint8((ImageLeveled -
min(ImageLeveled(:)))/(max(ImageLeveled(:)) - min(ImageLeveled(:))) * 255);
%Converts back to 8bit image
% manual_threshold = 10; %Sets threshold manually for conversion
% BWImage = ImageLeveled > manual_threshold;
% BWInverted = ~BWImage; %Inverts image
% BWDilated = imdilate(BWInverted,strel('square',5)); %Dilates pixels
% imshow(BWDilated);
% imwrite(BWDilated, strcat(InputFolder, ImageName, '_bearbeitet.',
ImageFormat));

%Find circles

%[centers, radii, metric] = imfindcircles(I,[100, 150],'Sensitivity',0.99);
%centersStrong5 = centers(1:1,:);
%radiiStrong5 = radii(1:1);
%metricStrong5 = metric(1:1);
%viscircles(centersStrong5, radiiStrong5,'EdgeColor','b');
% ImageNumber = ImageNumber + 1; %Goes to next image in For-loop

%BW2 = bwareaopen(J3,10)
%imshow(BW2)
%BW3 = imfill(BW2,'holes');
%imshow(BW3)

%I_leveled = I_leveled + 100;
%imshow(I_leveled,[]);

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/35#issuecomment-32612657
.

[GKA103]

Hi Arokem,

thanks for all the help. The (apparent!?) error in #2 is the imshow = (I), the "=" is too much and Matlab seems to recognize imshow as a variable and then imshow stops working in its regular function.

Thanks for all the help!

[blink1073]

Closing as fixed.