Open
Conversation
Author
|
i have commented the dep for 6lowpan in /bluez but now i got this message : |
Author
|
here is what i have when i clone linino-37 branch, run feeds update & install, & run "make menuconfig" & I exit : |
Author
|
with linino-37, i got this error : |
artynet
pushed a commit
that referenced
this pull request
Aug 28, 2018
Netgear WNR612v2 flashed with recent OpenWrt builds suffers from kernel panic at boot during wireless chip initialization, making device unusable: ath: phy0: Ignoring endianness difference in EEPROM magic bytes. ath: phy0: Enable LNA combining CPU 0 Unable to handle kernel paging request at virtual address 1000fee1, epc == 801d08f0, ra == 801d0d90 Oops[#1]: CPU: 0 PID: 469 Comm: kmodloader Not tainted 4.9.120 #0 [ ... register dump etc ... ] Kernel panic - not syncing: Fatal exception Rebooting in 1 seconds.. This simple patch fixes above error. It keeps LED table in memory after kernel init phase for ath9k driver to operate correctly (__initdata removed). Also, another bug is fixed - correct array size is provided to function that adds platform LEDs (this device has only 1 connected to Wifi chip) preventing code from going outside array bounds. Fixes: 1f5ea4e ("ar71xx: add correct named default wireless led by using platform leds") Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [trimmed commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
artynet
pushed a commit
that referenced
this pull request
Aug 28, 2018
Netgear WNR612v2 flashed with recent OpenWrt builds suffers from kernel panic at boot during wireless chip initialization, making device unusable: ath: phy0: Ignoring endianness difference in EEPROM magic bytes. ath: phy0: Enable LNA combining CPU 0 Unable to handle kernel paging request at virtual address 1000fee1, epc == 801d08f0, ra == 801d0d90 Oops[#1]: CPU: 0 PID: 469 Comm: kmodloader Not tainted 4.9.120 #0 [ ... register dump etc ... ] Kernel panic - not syncing: Fatal exception Rebooting in 1 seconds.. This simple patch fixes above error. It keeps LED table in memory after kernel init phase for ath9k driver to operate correctly (__initdata removed). Also, another bug is fixed - correct array size is provided to function that adds platform LEDs (this device has only 1 connected to Wifi chip) preventing code from going outside array bounds. Fixes: 1f5ea4e ("ar71xx: add correct named default wireless led by using platform leds") Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [trimmed commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
artynet
pushed a commit
that referenced
this pull request
Oct 11, 2018
This reverts commit 7af1fb9. With the RPS balancer patch, both my APU2s are crashing, sometimes just after a few minutes of uptime. [ 6241.170132] BUG: unable to handle kernel paging request at ffffffffa20a75a8 [ 6241.177248] IP: get_rps_cpu+0x41c/0x440 [ 6241.181140] PGD 2012067 P4D 2012067 PUD 2013063 PMD 0 [ 6241.186370] Oops: 0000 [#1] SMP NOPTI [ 6241.190080] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet nf_conntrack_pptp lzo iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_policy xt_pkttype xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_REDIRECT xt_NFQUEUE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard usbserial ts_fsm ts_bm spidev slhc rfcomm nft_set_rbtree nft_set_hash nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir_ipv4 nft_redir nft_quota nft_numgen nft_nat nft_meta nft_masq_ipv4 nft_masq [ 6241.261735] nft_log nft_limit nft_flow_offload nft_exthdr nft_ct nft_counter nft_chain_route_ipv6 nft_chain_route_ipv4 nft_chain_nat_ipv4 nfnetlink_queue nf_tables_ipv6 nf_tables_ipv4 nf_tables_inet nf_tables nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv6 nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv6 nf_nat_ipv6 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan lzo_decompress lzo_compress libcrc32c kvm irqbypass [ 6241.333427] iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt cdc_acm btusb btintel br_netfilter bnep bluetooth sch_cake tcp_bbr sch_teql em_nbyte sch_codel sch_prio sch_pie act_ipt em_meta sch_gred sch_dsmark cls_basic em_cmp em_text act_police sch_sfq sch_fq sch_multiq sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress configs evdev i2c_piix4 kfifo_buf industrialio i2c_dev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set [ 6241.405252] nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ip_gre gre igb i2c_algo_bit ifb ip6_vti ip_vti sit l2tp_netlink l2tp_core ipcomp6 xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet esp6 ah6 ipcomp xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 ip6_tunnel tunnel6 tunnel4 ip_tunnel veth snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd soundcore mpls_gso mpls_iptunnel mpls_router af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm regmap_mmio vxlan udp_tunnel ip6_udp_tunnel ecdh_generic sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 seqiv jitterentropy_rng drbg md5 kpp ccp_crypto rsa_generic mpi asn1_decoder akcipher ccp sha256_generic [ 6241.477726] sha1_generic hmac ghash_generic gcm echainiv des_generic deflate zlib_deflate ctr cmac ccm cbc authenc crypto_acompress sdhci_pltfm pf_ring sp5100_tco leds_apu2 gpio_nct5104d button_hotplug ptp pps_core [ 6241.497122] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.73 #0 [ 6241.503198] Hardware name: PC Engines apu2/apu2, BIOS v4.8.0.2 20180705 [ 6241.509858] task: ffff88012a0d8000 task.stack: ffffc90000070000 [ 6241.515841] RIP: 0010:get_rps_cpu+0x41c/0x440 [ 6241.520246] RSP: 0018:ffff88012ed83db0 EFLAGS: 00010286 [ 6241.525511] RAX: 00000000ffffffff RBX: 0000000000011ae8 RCX: 0000000000000001 [ 6241.532737] RDX: 00000000ffffffff RSI: ffff88012a0d8788 RDI: 0000000000000282 [ 6241.539956] RBP: ffff88012ed83e00 R08: 0000000000000001 R09: 0000000000000000 [ 6241.547183] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82dae2e0 [ 6241.554403] R13: ffff880124de4480 R14: 0000000000000000 R15: ffff880128120000 [ 6241.561625] FS: 0000000000000000(0000) GS:ffff88012ed80000(0000) knlGS:0000000000000000 [ 6241.569820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6241.575651] CR2: ffffffffa20a75a8 CR3: 00000001251da000 CR4: 00000000000406e0 [ 6241.582830] Call Trace: [ 6241.585322] <IRQ> [ 6241.587372] ? lock_acquire+0x59/0x80 [ 6241.591102] netif_receive_skb_internal+0x1e4/0x2d0 [ 6241.596037] napi_gro_receive+0x48/0x90 [ 6241.599948] igb_alloc_rx_buffers+0xc97/0x1b60 [igb] [ 6241.604981] ? note_gp_changes+0x76/0xc0 [ 6241.608963] net_rx_action+0x10c/0x280 [ 6241.612752] __do_softirq+0xf0/0x22d [ 6241.616375] irq_exit+0x5e/0xa0 [ 6241.619573] do_IRQ+0xee/0x110 [ 6241.622682] common_interrupt+0x8b/0x8b [ 6241.626556] </IRQ> [ 6241.628699] RIP: 0010:native_safe_halt+0x6/0x10 [ 6241.633260] RSP: 0018:ffffc90000073e10 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff3d [ 6241.640910] RAX: ffff88012a0d8000 RBX: ffff88012a190c00 RCX: 0000000000000000 [ 6241.648110] RDX: ffff88012a0d8000 RSI: 0000000000000001 RDI: ffff88012a0d8000 [ 6241.655354] RBP: ffffc90000073e10 R08: 0000000000000006 R09: 0000000000000000 [ 6241.662554] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012a190c64 [ 6241.669791] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001 [ 6241.676986] acpi_safe_halt.part.9+0xe/0x20 [ 6241.681226] acpi_idle_do_entry+0x2c/0x40 [ 6241.685325] acpi_idle_enter+0x1ee/0x2b0 [ 6241.689298] ? sched_clock+0x9/0x10 [ 6241.692839] cpuidle_enter_state+0x1f2/0x230 [ 6241.697162] cpuidle_enter+0x12/0x20 [ 6241.700803] call_cpuidle+0x38/0x40 [ 6241.704335] do_idle+0xed/0x160 [ 6241.707557] cpu_startup_entry+0x6e/0x70 [ 6241.711557] start_secondary+0x1b4/0x1d0 [ 6241.715536] secondary_startup_64+0xa5/0xb0 [ 6241.719777] Code: d4 48 8d 04 9b 48 8b 35 53 a7 ac 00 48 8d 1c 43 48 83 c6 64 48 c1 e3 03 48 8d bb e8 e2 da 82 e8 cb a9 ba ff 41 8b 14 1c 48 89 d0 <48> 0f a3 15 dc dc b6 00 0f 83 46 fc ff ff 48 83 c4 28 5b 41 5c [ 6241.739100] RIP: get_rps_cpu+0x41c/0x440 RSP: ffff88012ed83db0 [ 6241.744993] CR2: ffffffffa20a75a8 [ 6241.748373] ---[ end trace 77367d9f9830d5bc ]--- Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
artynet
pushed a commit
that referenced
this pull request
Aug 15, 2019
When enabling atomic-sleep-debugging options in the kernel,
following splat is seen when disabling the interface (which happens on boot):
[ 10.892878] eth0: link down
[ 10.896788] BUG: sleeping function called from invalid context at net/core/dev.c:5563
[ 10.904730] in_atomic(): 1, irqs_disabled(): 1, pid: 425, name: ip
[ 10.911004] 2 locks held by ip/425:
[ 10.914539] #0: (rtnl_mutex){....}, at: [<80377474>] rtnetlink_rcv_msg+0x2d8/0x380
[ 10.922441] #1: (&(&ag->lock)->rlock){....}, at: [<80330158>] ag71xx_hw_disable+0x24/0x94
[ 10.930976] CPU: 0 PID: 425 Comm: ip Not tainted 4.14.136 #0
[ 10.936716] Stack : 805e0000 80589228 80557404 876998ec 80610000 80610000 87cdcafc 805b5327
[ 10.945233] 80551534 000001a9 8061386c 87699ccc 87cfb180 00000001 876998a0 84f70903
[ 10.953751] 00000000 00000000 80b00000 8769979c 6a7407fa 00000000 00000007 00000000
[ 10.962270] 000000b7 16d0954a 000000b6 00000000 80000000 87cb658c 87cb65b0 00000001
[ 10.970787] 8046f97c 87699ccc 87cfb180 87ff2810 00000003 802ce724 0806e098 80610000
[ 10.979306] ...
[ 10.981797] Call Trace:
[ 10.984287] [<8006cb0c>] show_stack+0x58/0x100
[ 10.988814] [<800aab34>] ___might_sleep+0x100/0x120
[ 10.993774] [<8035c434>] napi_disable+0x30/0xd8
[ 10.998377] [<80330198>] ag71xx_hw_disable+0x64/0x94
[ 11.003418] [<8033069c>] ag71xx_stop+0x24/0x38
[ 11.007959] [<80359e30>] __dev_close_many+0xcc/0x104
[ 11.013009] [<80362eac>] __dev_change_flags+0xc8/0x1ac
[ 11.018227] [<80362fb8>] dev_change_flags+0x28/0x70
[ 11.023182] [<80376890>] do_setlink+0x31c/0x91c
[ 11.027786] [<80379360>] rtnl_newlink+0x3ec/0x7f8
[ 11.032563] [<80377498>] rtnetlink_rcv_msg+0x2fc/0x380
[ 11.037799] [<8039a734>] netlink_rcv_skb+0xd4/0x178
[ 11.042754] [<80399d10>] netlink_unicast+0x168/0x250
[ 11.047796] [<8039a2d4>] netlink_sendmsg+0x3d8/0x434
[ 11.052841] [<8033f0e4>] ___sys_sendmsg+0x1dc/0x290
[ 11.057794] [<80340140>] __sys_sendmsg+0x54/0x84
[ 11.062495] [<8007212c>] syscall_common+0x34/0x58
This is caused by calling napi_disable() while holding the spinlock.
Fix it by omitting the spinlock, which is not required here
Extensively tested on GL-MiFi, RB-912 and RB-922 hardware
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
artynet
pushed a commit
that referenced
this pull request
Aug 15, 2019
When enabling atomic-sleep-debugging options in the kernel,
following splat is seen when disabling the interface (which happens on boot):
[ 10.892878] eth0: link down
[ 10.896788] BUG: sleeping function called from invalid context at net/core/dev.c:5563
[ 10.904730] in_atomic(): 1, irqs_disabled(): 1, pid: 425, name: ip
[ 10.911004] 2 locks held by ip/425:
[ 10.914539] #0: (rtnl_mutex){....}, at: [<80377474>] rtnetlink_rcv_msg+0x2d8/0x380
[ 10.922441] #1: (&(&ag->lock)->rlock){....}, at: [<80330158>] ag71xx_hw_disable+0x24/0x94
[ 10.930976] CPU: 0 PID: 425 Comm: ip Not tainted 4.14.136 #0
[ 10.936716] Stack : 805e0000 80589228 80557404 876998ec 80610000 80610000 87cdcafc 805b5327
[ 10.945233] 80551534 000001a9 8061386c 87699ccc 87cfb180 00000001 876998a0 84f70903
[ 10.953751] 00000000 00000000 80b00000 8769979c 6a7407fa 00000000 00000007 00000000
[ 10.962270] 000000b7 16d0954a 000000b6 00000000 80000000 87cb658c 87cb65b0 00000001
[ 10.970787] 8046f97c 87699ccc 87cfb180 87ff2810 00000003 802ce724 0806e098 80610000
[ 10.979306] ...
[ 10.981797] Call Trace:
[ 10.984287] [<8006cb0c>] show_stack+0x58/0x100
[ 10.988814] [<800aab34>] ___might_sleep+0x100/0x120
[ 10.993774] [<8035c434>] napi_disable+0x30/0xd8
[ 10.998377] [<80330198>] ag71xx_hw_disable+0x64/0x94
[ 11.003418] [<8033069c>] ag71xx_stop+0x24/0x38
[ 11.007959] [<80359e30>] __dev_close_many+0xcc/0x104
[ 11.013009] [<80362eac>] __dev_change_flags+0xc8/0x1ac
[ 11.018227] [<80362fb8>] dev_change_flags+0x28/0x70
[ 11.023182] [<80376890>] do_setlink+0x31c/0x91c
[ 11.027786] [<80379360>] rtnl_newlink+0x3ec/0x7f8
[ 11.032563] [<80377498>] rtnetlink_rcv_msg+0x2fc/0x380
[ 11.037799] [<8039a734>] netlink_rcv_skb+0xd4/0x178
[ 11.042754] [<80399d10>] netlink_unicast+0x168/0x250
[ 11.047796] [<8039a2d4>] netlink_sendmsg+0x3d8/0x434
[ 11.052841] [<8033f0e4>] ___sys_sendmsg+0x1dc/0x290
[ 11.057794] [<80340140>] __sys_sendmsg+0x54/0x84
[ 11.062495] [<8007212c>] syscall_common+0x34/0x58
This is caused by calling napi_disable() while holding the spinlock.
Fix it by omitting the spinlock, which is not required here
Extensively tested on GL-MiFi, RB-912 and RB-922 hardware
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
artynet
pushed a commit
that referenced
this pull request
May 10, 2020
Fixes a build error seen when applying the kernel patches. Applying patch generic/435-mtd-add-routerbootpart-parser-config.patch patching file drivers/mtd/parsers/Kconfig Hunk #1 FAILED at 160. 1 out of 1 hunk FAILED -- rejects in file drivers/mtd/parsers/Kconfig patching file drivers/mtd/parsers/Makefile Hunk #1 FAILED at 10. 1 out of 1 hunk FAILED -- rejects in file drivers/mtd/parsers/Makefile This was missed as 5.4 is currently set as testing kernel while the main kernel being used is 4.19 Fixes: 2976e42 ("generic: routerboot partition build bits") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
artynet
pushed a commit
that referenced
this pull request
Dec 23, 2020
The Ubiquiti Network airCube AC is a cube shaped device supporting 2.4 GHz and 5 GHz with internal 2x2 MIMO antennas. It can be powered with either one of: - 24v power supply with 3.0mm x 1.0mm barrel plug - 24v passive PoE on first LAN port There are four 10/100/1000 Mbps ports (1 * WAN + 3 * LAN). First LAN port have optional PoE passthrough to the WAN port. SoC: Qualcomm / Atheros AR9342 RAM: 64 MB DDR2 Flash: 16 MB SPI NOR Ethernet: 4x 10/100/1000 Mbps (1 WAN + 3 LAN) LEDS: 1x via a SPI controller (not yet supported) Buttons: 1x Reset Serial: 1x (only RX and TX); 115200 baud, 8N1 Missing features: - LED control is not supported Physical to internal switch port mapping: - physical port #1 (poe in) = switchport 2 - physical port #2 = switchport 3 - physical port lede-project#3 = switchport 5 - physical port lede-project#4 (wan/poe out) = switchport 4 Factory update is tested and is the same as for Ubiquiti AirCube ISP hence the shared configuration between that devices. Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
artynet
pushed a commit
that referenced
this pull request
Feb 25, 2021
SMP isn't supported on BCM6358 since it has a shared TLB. Some boards boot with CPU #1 instead of CPU #0, and this is currently not supported do to a smp-bmips bug. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
artynet
pushed a commit
that referenced
this pull request
May 17, 2021
The code uses get_mtd_device_nm() which must be followed by a call to put_mtd_device() once the handle is no longer used. This fixes spurious shutdown console messages such as: [ 83.099037] Removing MTD device #1 (hard_config) with use count 1 Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> [Backported from master] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
artynet
pushed a commit
that referenced
this pull request
Oct 25, 2021
ag71xx_probe is registering ag71xx_interrupt as handler for the gmac0/gmac1 interrupts. The handler is trying to use napi_schedule to handle the processing of packets. But the netif_napi_add for this device is called a lot later in ag71xx_probe. It can therefore happen that a still running gmac0/gmac1 is triggering the interrupt handler with a bit from AG71XX_INT_POLL set in AG71XX_REG_INT_STATUS. The handler will then call napi_schedule and the napi code will crash the system because the ag->napi is not yet initialized: libphy: Fixed MDIO Bus: probed CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 81373408 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.152 #0 $ 0 : 00000000 00000001 00000000 8280bf28 $ 4 : 82a98cb0 00000000 81620000 00200140 $ 8 : 00000000 00000000 74657272 7570743a $12 : 0000005b 8280bdb9 ffffffff ffffffff $16 : 00000001 82a98cb0 00000000 8280bf27 $20 : 8280bf28 81620000 ffff8b00 8280bf30 $24 : 00000000 8125af9c $28 : 82828000 8280bed8 81610000 81373408 Hi : 00005fff Lo : 2e48f657 epc : 00000000 0x0 ra : 81373408 __napi_poll+0x3c/0x11c Status: 1100dc03 KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : ffff8afb ffff8afa 81620000 00200140 00000000 82a98cb0 00000008 0000012c 81625620 81373684 ffffffff ffffffff ffffffef 00000008 816153d8 81620000 815b0d60 815bbd54 00000000 81753700 8280bf28 8280bf28 8280bf30 8280bf30 81753748 00000008 00000003 00000004 0000000c 00000100 3fffffff 8175373c 816059f0 814ddb48 00000001 8160ab30 81615488 810618bc 00000006 00000000 ... Call Trace: [<81373684>] net_rx_action+0xfc/0x26c [<814ddb48>] __do_softirq+0x118/0x2ec [<810618bc>] handle_percpu_irq+0x50/0x80 [<8125ab8c>] plat_irq_dispatch+0x94/0xc8 [<81004e98>] handle_int+0x138/0x144 Code: (Bad address in epc) ---[ end trace a60d797432b656b2 ]--- The gmcc0/gmac1 must be brought in a state in which it doesn't signal a AG71XX_INT_POLL related status bits as interrupt before registering the interrupt handler. ag71xx_hw_start will take care of re-initializing the AG71XX_REG_INT_ENABLE. Fixes: f529a37 ("surprise :p") Signed-off-by: Sven Eckelmann <sven@narfation.org>
artynet
pushed a commit
that referenced
this pull request
Nov 30, 2021
Martin Kennedy reported: |Presently, I get this kernel panic on mpc85xx (Aerohive HiveAP 370) |on OpenWrt 'master' which occurs right as the second processor is |initialized: | |[ 0.478804] rcu: Hierarchical SRCU implementation. |[ 0.535569] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build |[ 0.627233] smp: Bringing up secondary CPUs ... |[ 0.681659] kernel tried to execute user page (0) - exploit attempt? (uid: 0) |[ 0.766618] BUG: Unable to handle kernel instruction fetch (NULL pointer?) |[ 0.848899] Faulting instruction address: 0x00000000 |[ 0.908273] Oops: Kernel access of bad area, sig: 11 [#1] |[ 0.972851] BE PAGE_SIZE=4K SMP NR_CPUS=2 P1020 RDB |[ 1.031179] Modules linked in: |[ 1.067640] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.80 #0 |[ 1.139507] NIP: 00000000 LR: c0021d2c CTR: 00000000 |[ 1.199921] REGS: c1051cf0 TRAP: 0400 Not tainted (5.10.80) |[...] |[ 1.758220] NIP [00000000] 0x0 |[ 1.794688] LR [c0021d2c] smp_85xx_kick_cpu+0xe8/0x568 |[ 1.856126] Call Trace: |[ 1.885295] [c1051da8] [c0021cb8] smp_85xx_kick_cpu+0x74/0x568 (unreliable) |[ 1.968633] [c1051de8] [c0011460] __cpu_up+0xc0/0x228 |[ 2.029038] [c1051e18] [c0031bbc] bringup_cpu+0x30/0x224 |[ 2.092572] [c1051e48] [c0031f3c] cpu_up.constprop.0+0x180/0x33c |[..] |[ 2.727952] ---[ end trace 9b796a4bafb6bc14 ]--- |[ 3.800879] Kernel panic - not syncing: Fatal exception |[ 3.862353] Rebooting in 1 seconds.. |[ 5.905097] System Halted, OK to turn off power | |I bisected this down to commit 3ae5da5 ("kernel: bump 5.10 to 5.10.80"); |that is, I don't get the panic right before this commit, but I do after. He reported the issue upstream and Xiaoming Ni from huawei came up with the patch (that is on it's way to upstream). While the AP370 is not in Openwrt, this will likely affect other SMP P1020 devices OpenWrt ships with: like the AP330, Enterasys WS-AP3710i, etc. Reported-by: Martin Kennedy <hurricos@gmail.com> Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Dec 6, 2021
Zbtlink ZBT-WG1602 is a Wi-Fi router intendent to use with WWAN
(UMTS/LTE/3G/4G) modems. The router board offsers a couple of miniPCIe
slots with USB and SIM only and another one pure miniPCIe slot as well
as five Gigabit Ethernet ports (4xLAN + WAN).
Specification:
* SoC: MT7621A
* RAM: 256/512 MiB
* Flash: 16/32 MiB (SPI NOR)
* external watchdog (looks like Torexsemi XC6131B)
* Eth: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN)
* WLAN 2GHz: MT7603EN (.11n, MIMO 2x2)
* WLAN 5GHz: MT7612EN (.11ac, MIMO 2x2)
* WLAN Ants: detachable x2, shared by 2GHz & 5GHz radios
* miniPCIe: 2x slots with USB&SIM + 1x slot with regular PCIe bus
* WWAN Ants: detachable x4
* External storage: microSD (SDXC) slot
* USB: 2.0 Type-A port
* LED: 11 (5 per Eth phy, 3 SoC controlled, 2 WLAN 2/5 controlled, 1
power indicator)
* Button: 1 (reset)
* UART: console (115200 baud)
* Power: DC jack (12 V / 2.5 A)
Additional HW information:
* SoC USB port #1 is shared by internal miniPCIe slot and external
Type-A USB port, USB D+/D- lines are toggled between ports using a
GPIO controlled DPDT switch.
* Power of the USB enabled miniPCIe slots can be individually controlled
using dedicated GPIO lines.
* Vendor firmware feeds the external watchdog with 1s pulses. GPIO
watchdog driver is able to either generate a 1us pulses or toggle the
output line. 1us is not enough for the external watchod timer, so
the line toggling driver mode is utilized.
Installation:
Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can
be directly used to install OpenWrt. Firmware must be upgraded using the
'force' and 'do not save configuration' command line options (or
correspondig web interface checkboxes) since the vendor firmware is from
the pre-DSA era.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Mar 28, 2022
Ticerex on the OpenWrt Forum reported a gnarly crash when he was using Samsung 840 and 850 EVOs with his MyBook Live: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This turned out this is an issue with upstream changing ATA_TAG_INTERNAL's value from 31 to 32 during 4.18 release. Update "SATA_DWC_QCMD_MAX" to account for that. Link: https://forum.openwrt.org/t/my-book-live-duo-reboot-loop/122464 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Mar 28, 2022
Ticerex on the OpenWrt Forum reported a gnarly crash when he was using Samsung 840 and 850 EVOs with his MyBook Live: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This turned out this is an issue with upstream changing ATA_TAG_INTERNAL's value from 31 to 32 during 4.18 release. Update "SATA_DWC_QCMD_MAX" to account for that. Link: https://forum.openwrt.org/t/my-book-live-duo-reboot-loop/122464 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 5ac672cfab60e90ab8a0bf3491fa2a27619d22d6)
artynet
pushed a commit
that referenced
this pull request
Mar 28, 2022
Ticerex on the OpenWrt Forum reported a gnarly crash when he was using Samsung 840 and 850 EVOs with his MyBook Live: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This turned out this is an issue with upstream changing ATA_TAG_INTERNAL's value from 31 to 32 during 4.18 release. Update "SATA_DWC_QCMD_MAX" to account for that. Link: https://forum.openwrt.org/t/my-book-live-duo-reboot-loop/122464 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit e95dec8)
artynet
pushed a commit
that referenced
this pull request
May 28, 2022
Original patch: cifsd-team/ksmbd-tools#227 adapted for ksmbd kernel module v3.4.3 by me. Fixes crash in v3.4.3 only. Use original patch when updating to v3.4.4 as this one will fail hunk #1. Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
artynet
pushed a commit
that referenced
this pull request
Sep 12, 2022
Turris MOX randomly crashes up, when there is connected miniPCIe card MediaTek MT7915 with the following output: [ 71.457007] Internal error: synchronous external abort: 96000210 [#1] SMP [ 71.464021] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat ath9k xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIREl [ 71.464187] btintel br_netfilter bnep bluetooth ath9k_hw ath10k_pci ath10k_core ath sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_mg [ 71.629589] CPU: 0 PID: 1298 Comm: kworker/u5:3 Not tainted 5.4.114 #0 [ 71.636319] Hardware name: CZ.NIC Turris Mox Board (DT) [ 71.641725] Workqueue: napi_workq napi_workfn [ 71.646221] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 71.651169] pc : mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.656385] lr : mt7915_init_debugfs+0x358/0x368 [mt7915e] [ 71.662038] sp : ffffffc010003cd0 [ 71.665451] x29: ffffffc010003cd0 x28: 0000000000000060 [ 71.670929] x27: ffffffc010a56f98 x26: ffffffc010c0fa9a [ 71.676407] x25: ffffffc010ba8788 x24: ffffff803e01fe00 [ 71.681885] x23: 0000000000000030 x22: ffffffc010003dc4 [ 71.687361] x21: 0000000000000000 x20: ffffff803e01fea4 [ 71.692839] x19: ffffff803cb725c0 x18: 000000002d660780 [ 71.698317] x17: 0000000000000000 x16: 0000000000000001 [ 71.703795] x15: 0000000000005ee0 x14: ffffffc010d1d000 [ 71.709272] x13: 0000000000002f70 x12: 0000000000000000 [ 71.714749] x11: 0000000000000000 x10: 0000000000000040 [ 71.720226] x9 : ffffffc010bbe980 x8 : ffffffc010bbe978 [ 71.725704] x7 : ffffff803e4003f0 x6 : 0000000000000000 [ 71.731181] x5 : ffffffc02f240000 x4 : ffffffc010003e00 [ 71.736658] x3 : 0000000000000000 x2 : ffffffc008e3f230 [ 71.742135] x1 : 00000000000d7010 x0 : ffffffc0114d7010 [ 71.747613] Call trace: [ 71.750137] mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.754990] mt7915_dual_hif_set_irq_mask+0x108/0xdc0 [mt7915e] [ 71.761098] __handle_irq_event_percpu+0x6c/0x170 [ 71.765950] handle_irq_event_percpu+0x34/0x88 [ 71.770531] handle_irq_event+0x40/0xb0 [ 71.774486] handle_level_irq+0xe0/0x170 [ 71.778530] generic_handle_irq+0x24/0x38 [ 71.782667] advk_pcie_irq_handler+0x11c/0x238 [ 71.787249] __handle_irq_event_percpu+0x6c/0x170 [ 71.792099] handle_irq_event_percpu+0x34/0x88 [ 71.796680] handle_irq_event+0x40/0xb0 [ 71.800633] handle_fasteoi_irq+0xdc/0x190 [ 71.804855] generic_handle_irq+0x24/0x38 [ 71.808988] __handle_domain_irq+0x60/0xb8 [ 71.813213] gic_handle_irq+0x8c/0x198 [ 71.817077] el1_irq+0xf0/0x1c0 [ 71.820314] el1_da+0xc/0xc0 [ 71.823288] mt76_set_irq_mask+0x118/0x150 [mt76] [ 71.828141] mt7915_mac_tx_free+0x4c4/0x828 [mt7915e] [ 71.833352] mt7915_queue_rx_skb+0x5c/0xa8 [mt7915e] [ 71.838473] mt76_dma_cleanup+0x89c/0x1248 [mt76] [ 71.843329] __napi_poll+0x38/0xf8 [ 71.846835] napi_workfn+0x58/0xb0 [ 71.850342] process_one_work+0x1fc/0x390 [ 71.854475] worker_thread+0x48/0x4d0 [ 71.858252] kthread+0x120/0x128 [ 71.861581] ret_from_fork+0x10/0x1c [ 71.865273] Code: 52800000 d65f03c0 f9562c00 8b214000 (b9400000) [ 71.871560] ---[ end trace 1d4e29987011411b ]--- [ 71.876320] Kernel panic - not syncing: Fatal exception in interrupt [ 71.882875] SMP: stopping secondary CPUs [ 71.886923] Kernel Offset: disabled [ 71.890519] CPU features: 0x0002,00002008 [ 71.894649] Memory Limit: none [ 71.897799] Rebooting in 3 seconds.. Patch is awaiting upstream merge: https://lore.kernel.org/linux-pci/20220802123816.21817-1-pali@kernel.org/T/#u There was also discussion about it in the linux-pci mailing list, where can be found response from Marvell's employee regarding A3720 PCIe erratum 3.12, which seems to provide further details which help this issue: https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u Reported-by: Ondřej Caletka <ondrej@caletka.cz> [Turris MOX] Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Dec 13, 2022
This showed up in the log: |Hunk #1 succeeded at 555 (offset -83 lines). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Jan 5, 2023
Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: torvalds/linux@1909893 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
artynet
pushed a commit
that referenced
this pull request
May 22, 2023
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1200Mhz - Flash size: 32 MiB - RAM: 512MB - LAN: 2x 1Gbit/s - 3x USB 2.0 Notes: - The blue drive LED is triggered by HDD activity, it can not be controlled via GPIO. - The LCD screen requires proprietary code and does not function at this time. - Due to a kernel-related issue with the Marvell 88SE6121 SATA controller, currently only trays numbered lede-project#3 and lede-project#4 work, #1 and #2 do not. [1] Serial pinout: CN4 -------------- | 10 8 6 4 2 | | 9 7 5 3 1 | -------------- PIN 1 Mark (fat line) 1 = RXD 4 = TXD 6 = GND 9 = 3.3V (not necessary to connect) Installation instructions: 1. download initramfs-uImage and copy into tftp server 2. connect the tftp server to network port #1 3. access uboot environment with serial cable and run setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x00800000 [initramfs-uImage filename] bootm 0x00800000 4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash [1] https://bugzilla.kernel.org/show_bug.cgi?id=216094 Signed-off-by: Sander van Deijck <sander@vandeijck.com> (aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Jan 18, 2024
Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 16MB NOR RAM: 256MB Ethernet: 2x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A, PoE 802.3af 48V Flash instructions: Option #1 - SSH I was able to SSH into the stock firmware of my device. 1. Attach the router to the network 2. Use scp (-O) to copy the sysupgrade image 3. Connect using SSH and run `sysupgrade -n` Option #2 - U-Boot One way to use the bootloader for flashing is using TFTP: 1. Connect to the router using an ethernet cable 2 Spin up a TFTP server serving the sysupgrade file 3. Open the case and attach a UART 4. Attach power to the router and interrupt the countdown by pressing any key 5. Select option #2 (Upgrade firmware) 6. Enter IP address information and image name 7. Wait patiently Co-Authored-By: Enrique Rodríguez Valencia <enrique.rodriguez@galgus.net> Co-Authored-By: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
artynet
pushed a commit
that referenced
this pull request
Mar 14, 2024
Currently, the existing uncompressed kallsym support is causing qualcommax boards to hang on boot, and only after earlycon and verbose BUG() prints are enabled the trace is visible: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at kernel/kallsyms.c:340! [ 0.000000] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Felix has fixed up the uncompressed kallsyms support so modify the current patch with the fix. All credits for the code go to Felix. Signed-off-by: Robert Marko <robimarko@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Apr 1, 2024
Don't add KERNEL_TESTING_PATCHVER yet as there are some issues with it. On TP-Link Archer C2300 serial console seems to stop working after preinit: > Press the [f] key and hit [enter] to enter failsafe mode > Press the [1], [2], [3] or [4] key and hit [enter] to select the de� On Netgear R8000P XHCI causes external abort: [ 2.139586] Internal error: synchronous external abort: 0000000096000210 [#1] SMP [ 2.147212] Modules linked in: xhci_plat_hcd(+) xhci_hcd ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug(O) usbcore nls_base usb_common crc32c_generic [ 2.164774] CPU: 0 PID: 358 Comm: kmodloader Tainted: G O 6.6.22 #0 [ 2.172658] Hardware name: Netgear R8000P (DT) [ 2.177229] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.184395] pc : xhci_gen_setup+0x80/0x34c [xhci_hcd] [ 2.189591] lr : xhci_gen_setup+0x74/0x34c [xhci_hcd] [ 2.194788] sp : ffffffc0815d37b0 [ 2.198194] x29: ffffffc0815d37b0 x28: ffffff8002000000 x27: ffffff8001172d88 [ 2.205540] x26: ffffff8002000000 x25: 0000000000000000 x24: ffffffc078b603c0 [ 2.212888] x23: ffffffc078b2a008 x22: ffffff8001172c10 x21: ffffff8002000000 [ 2.220235] x20: ffffff8002000000 x19: ffffff8002000250 x18: 0000000000000000 [ 2.227582] x17: 626d756e20737562 x16: 2064656e67697373 x15: ffffffffffffffff [ 2.234929] x14: ffffff80019e9915 x13: ffffff80019e9913 x12: 00000000ffffffea [ 2.242276] x11: 00000000ffffefff x10: 0000000000000062 x9 : 00000000ffffffd0 [ 2.246760] bcm63138_nand ff801800.nand-controller: timeout waiting for command 0x4 [ 2.249623] x8 : 0000000000000073 x7 : ffffffc0815d37c0 x6 : 0000000000000075 [ 2.257513] bcm63138_nand ff801800.nand-controller: intfc status c00000e0 [ 2.264855] x5 : 0000000000000081 x4 : 0000000000000000 x3 : ffffff8001b61800 [ 2.279193] x2 : ffffffc080b5d000 x1 : ffffff80020003a8 x0 : ffffff8002000398 [ 2.286540] Call trace: [ 2.289048] xhci_gen_setup+0x80/0x34c [xhci_hcd] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
artynet
pushed a commit
that referenced
this pull request
Jul 2, 2024
If this function is marked as __init, kernel will splat when driver is (re)bind echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/unbind echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/bind Example with additional print messages, functions at boot: [ 2.039468] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev [ 2.039530] ipqess-edma c080000.ethernet: *netdev: c27d2000 [ 2.045609] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c [ 2.051122] ipqess_init [ 2.057338] netdev: c27d2000 [ 2.059492] ess = netdev_priv: c27d2500 [ 2.062615] ess->pdev: c2138c00 [ 2.066174] ess->pdev->dev: c2138c10 [ 2.069314] ess->pdev->dev.of_node: ef6f6368 [ 2.073120] ess->pdev->dev.of_node: /soc/ethernet@c080000 fails (bind) after unbind: [ 34.987948] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev [ 34.988012] ipqess-edma c080000.ethernet: *netdev: c27d6000 [ 34.994088] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c [ 34.999652] 8<--- cut here --- [ 35.005802] Unable to handle kernel paging request at virtual address c0d1e28c when execute [ 35.008676] [c0d1e28c] *pgd=80c1941e(bad) [ 35.016918] Internal error: Oops: 8000000d [#1] SMP ARM Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Link: openwrt/openwrt#15831 Signed-off-by: Robert Marko <robimarko@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Jul 8, 2024
Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 16MB NOR RAM: 256MB Ethernet: 2x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A, PoE 802.3af 48V Flash instructions: Option #1 - SSH I was able to SSH into the stock firmware of my device. 1. Attach the router to the network 2. Use scp (-O) to copy the sysupgrade image 3. Connect using SSH and run `sysupgrade -n` Option #2 - U-Boot One way to use the bootloader for flashing is using TFTP: 1. Connect to the router using an ethernet cable 2 Spin up a TFTP server serving the sysupgrade file 3. Open the case and attach a UART 4. Attach power to the router and interrupt the countdown by pressing any key 5. Select option #2 (Upgrade firmware) 6. Enter IP address information and image name 7. Wait patiently Co-Authored-By: Enrique Rodríguez Valencia <enrique.rodriguez@galgus.net> Co-Authored-By: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> (cherry picked from commit b4086f4)
artynet
pushed a commit
that referenced
this pull request
Oct 11, 2024
Currently, when removing ath11k or any other driver that uses dummy netdev kernel will crash with: [ 365.004961] ------------[ cut here ]------------ [ 365.004992] kernel BUG at net/core/dev.c:10979! [ 365.008642] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 365.012898] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet ath11k_ahb(O) ath11k(O) pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_c [ 365.064794] CPU: 3 PID: 3896 Comm: procd Tainted: G O 6.6.52 #0 [ 365.087031] Hardware name: QNAP 301w (DT) [ 365.094058] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 365.098229] pc : free_netdev+0x164/0x1a0 [ 365.104994] lr : free_netdev+0xec/0x1a0 [ 365.109159] sp : ffffffc081d33b90 [ 365.112718] x29: ffffffc081d33b90 x28: ffffff80039d3c00 x27: ffffff800307f000 [ 365.116199] x26: ffffff800538a000 x25: ffffff8005388000 x24: ffffff800538a4c0 [ 365.123317] x23: 00000000000023a4 x22: ffffff8005388f68 x21: ffffff8004e37050 [ 365.130434] x20: ffffff8004e37000 x19: ffffff8004e36ee8 x18: 0000000000000152 [ 365.137552] x17: 63775f357636712e x16: 3030303030646320 x15: ffffffc081436e20 [ 365.144670] x14: ffffff80033f261c x13: 00000000000000d9 x12: 0000000000000002 [ 365.151789] x11: 0000000000000000 x10: 00000000000008a0 x9 : ffffffc081d33980 [ 365.158906] x8 : ffffff80039d4500 x7 : ffffff803fdda6c0 x6 : 0000000000000007 [ 365.166025] x5 : 0000000000000000 x4 : 00000000000000c1 x3 : 00000000000001f4 [ 365.173143] x2 : ffffff803fdd4b78 x1 : ffffff8004e37050 x0 : 0000000000000005 [ 365.180261] Call trace: [ 365.187370] free_netdev+0x164/0x1a0 [ 365.189630] 0xffffffc079b373f0 [ 365.193447] 0xffffffc079b374c0 [ 365.196311] platform_shutdown+0x24/0x34 [ 365.199438] device_shutdown+0x160/0x268 [ 365.203605] kernel_restart+0x40/0xc0 [ 365.207510] __do_sys_reboot+0x104/0x220 [ 365.211070] __arm64_sys_reboot+0x24/0x30 [ 365.215063] invoke_syscall.constprop.0+0x5c/0x108 [ 365.218971] do_el0_svc+0x40/0xc8 [ 365.223655] el0_svc+0x30/0xb8 [ 365.227041] el0t_64_sync_handler+0x120/0x12c [ 365.229995] el0t_64_sync+0x178/0x17c [ 365.234424] Code: f94013f5 a8c37bfd d50323bf d65f03c0 (d4210000) [ 365.238072] ---[ end trace 0000000000000000 ]--- Wireless backports include alloc_netdev_dummy() backport but they dont have the required free_netdev change first, so backport it. Fixes: #16531 Fixes: 384d079 ("mac80211: update to version 6.11") Link: openwrt/openwrt#16549 Signed-off-by: Robert Marko <robimarko@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Jan 30, 2025
It looks like VRX518 returns phys addr of data buffer in the 'data_ptr' field of the RX descriptor and an actual data offset within the buffer in the 'byte_off' field. In order to map the phys address back to virtual we need the original phys address of the allocated buffer. In the same driver applies offset to phys address before the mapping, what leads to WARN_ON triggering in plat_mem_virt() function with subsequent kernel panic: WARNING: CPU: 0 PID: 0 at .../sw_plat.c:764 0xbf306cd0 [vrx518_tc@8af9f5d0+0x25000] ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = aff5701e [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Noticed in ATM mode, when chip always returns byte_off = 4. In order to fix the issue, pass the phys address to plat_mem_virt() as is and apply byte_off later for proper DMA syncing and on mapped virtual address when copying RXed data into the skb. Run tested with FRITZ!Box 7530 on both ADSL and VDSL (thanks Jan) links. Fixes: 474bbe2 ("kernel: add Intel/Lantiq VRX518 TC driver") Tested-by: Jan Hoffmann <jan@3e8.eu> # VDSL link Reported-and-tested-by: nebibigon93@yandex.ru # ADSL link Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-2-ryazanov.s.a@gmail.com/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
artynet
pushed a commit
that referenced
this pull request
Jan 30, 2025
It looks like VRX518 returns phys addr of data buffer in the 'data_ptr' field of the RX descriptor and an actual data offset within the buffer in the 'byte_off' field. In order to map the phys address back to virtual we need the original phys address of the allocated buffer. In the same driver applies offset to phys address before the mapping, what leads to WARN_ON triggering in plat_mem_virt() function with subsequent kernel panic: WARNING: CPU: 0 PID: 0 at .../sw_plat.c:764 0xbf306cd0 [vrx518_tc@8af9f5d0+0x25000] ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = aff5701e [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Noticed in ATM mode, when chip always returns byte_off = 4. In order to fix the issue, pass the phys address to plat_mem_virt() as is and apply byte_off later for proper DMA syncing and on mapped virtual address when copying RXed data into the skb. Run tested with FRITZ!Box 7530 on both ADSL and VDSL (thanks Jan) links. Fixes: 474bbe2 ("kernel: add Intel/Lantiq VRX518 TC driver") Tested-by: Jan Hoffmann <jan@3e8.eu> # VDSL link Reported-and-tested-by: nebibigon93@yandex.ru # ADSL link Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-2-ryazanov.s.a@gmail.com/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7bd5796)
artynet
pushed a commit
that referenced
this pull request
Jun 23, 2025
Add missing function reference for the l2_hash_seed call in rtl931x_reg in the rtl83xx DSA driver part. While at it, rename the referenced function to proper naming convention and simplify its content. The missing reference causes a hard crash after a short time (on MS510TXM) because the driver assumes the reference always exists. [ 111.785559] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 805469a0 [ 111.800991] Oops[#1]: [ 111.801026] CPU: 0 PID: 11 Comm: kworker/u8:0 Tainted: G O 6.12.33 #0 [ 111.801046] Workqueue: dsa_ordered dsa_slave_switchdev_event_work ... [ 111.880600] epc : 00000000 0x0 [ 111.884219] ra : 805469a0 rtl83xx_port_fdb_add+0x7c/0x204 [ 111.890570] Status: 11000403 KERNEL EXL IE [ 111.895263] Cause : 50800008 (ExcCode 02) [ 111.899731] BadVA : 00000000 [ 111.902946] PrId : 0001a120 (MIPS interAptiv (multi)) [ 111.956086] Process kworker/u8:0 (pid: 11, threadinfo=0b107c25, task=265aeb31, tls=00000000) ... [ 112.015167] Call Trace: [ 112.019549] [<80170b04>] load_balance+0x494/0x708 [ 112.025022] [<807bb368>] dsa_port_do_fdb_add+0x24c/0x340 [ 112.031048] [<807bc868>] dsa_switch_event+0xd44/0x13cc [ 112.036845] [<8015867c>] raw_notifier_call_chain+0x48/0x88 [ 112.043031] [<807bcf3c>] dsa_tree_notify+0x10/0x3c [ 112.048395] [<807b2a64>] dsa_port_bridge_host_fdb_add+0x15c/0x190 [ 112.055459] [<807b4e40>] dsa_slave_switchdev_event_work+0x164/0x1cc ... Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Link: openwrt/openwrt#19170 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
artynet
pushed a commit
that referenced
this pull request
Jul 21, 2025
The ix4-200d is a 4 bay NAS supported since OpenWrt 23.05. Drive trays controller. Due to a kernel-related issue with the SATA controller, trays #1 and #2 were not recognized. This issue has been fixed in kernel 6.10, so with the adoption of kernel 6.12 in the Kirkwood target trays #1 and #2 can now be made accessible. This requires the kmod-ata-ahci package, which this commit adds as default to the makefile. Signed-off-by: Sander van Deijck <sander@vandeijck.com> Link: openwrt/openwrt#19435 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
artynet
pushed a commit
that referenced
this pull request
Aug 26, 2025
Booting Realtek switches via TFTP will have a chance of ~5% to fail with the following dump on SMP devices. Sample taken from RTL931x. [ 1.318320] rtl931x_chip_init: init ENCAP done [ 1.323360] rtl931x_chip_init: init MIB done [ 1.328337] rtl931x_chip_init: init ACL done [ 1.333219] rtl931x_chip_init: init ALE done [ 1.344307] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 806c5c4c [ 1.356418] Oops[#1]: [ 1.359067] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #0 [ 1.366582] Hardware name: Linksys LGS352C [ 1.371226] $ 0 : 00000000 00000001 00000000 80b6cc44 [ 1.377179] $ 4 : 836b0540 00000000 00000000 83011d38 [ 1.383119] $ 8 : 00000000 ffffefff 00000001 80b08c08 [ 1.389071] $12 : ffffffea 83011d34 00000072 00000558 [ 1.395060] $16 : 836b0540 00000000 00000100 83011ebf [ 1.401003] $20 : 83011ec0 83011ec8 ffff8b3c 80b00000 [ 1.406984] $24 : 00000000 80b08c38 [ 1.412922] $28 : 83038000 83011e70 82fb37a0 806c5c4c [ 1.418888] Hi : 0000014b [ 1.422201] Lo : c74d8000 [ 1.425490] epc : 00000000 0x0 [ 1.429191] ra : 806c5c4c __napi_poll+0x4c/0x208 [ 1.434728] Status: 11000403 KERNEL EXL IE [ 1.439497] Cause : 50800008 (ExcCode 02) [ 1.444040] BadVA : 00000000 [ 1.447330] PrId : 0001a120 (MIPS interAptiv (multi)) [ 1.453157] Modules linked in: [ 1.456641] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.465742] Stack : 82faf248 80a8d558 817ed500 ffff8b3a 836b0540 8066a348 82fb2bc0 836b0540 [ 1.475209] 82fb3600 00000100 0000012c 806c6274 00000000 00000017 00000002 80196134 [ 1.484701] 80b00000 83011ed0 83011eb8 83011e00 83011ec0 83011ec0 83011ec8 83011ec8 [ 1.494233] 00000001 81920000 81920000 80aefe4c 836b0000 00000000 00000000 00000001 [ 1.503686] 00000100 00000000 83011f20 80aefde0 00000000 8019ac14 80b01550 00000000 [ 1.513144] ... [ 1.515957] Call Trace: [ 1.515996] [ 1.520458] [<8066a348>] rtl93xx_net_irq+0x1a4/0x1ac [ 1.526116] [<806c6274>] net_rx_action+0x18c/0x360 [ 1.531576] [<80196134>] __handle_irq_event_percpu+0x58/0x16c [ 1.538111] [<8019ac14>] handle_level_irq+0x1e0/0x1f4 [ 1.543870] [<80133588>] handle_softirqs+0x14c/0x2ec [ 1.549488] [<801339e4>] irq_exit+0x84/0xb4 [ 1.554183] [<805527dc>] plat_irq_dispatch+0x90/0xdc [ 1.559764] [<801019f0>] except_vec_vi_end+0xc4/0xd0 [ 1.565337] A network interrupt may be received before the device is setup properly. In this case NAPI structures are missing and __napi_poll() will find a NULL pointer in n->poll. Avoid this by registering the device after initialization is complete. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: openwrt/openwrt#19787 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
artynet
pushed a commit
that referenced
this pull request
Sep 7, 2025
The receive path of the RTL93xx SoCs is currently discarding packets in software. Analysis gives the following explanation: - RX ring size registers are setup with the full software ring size - When packets are received the packet counter registers are increased - After RX processing the counter registers are changed the wrong way - From then SOC is allowed to receive more packets than software allows - Overflow interrupts are fired - As a reaction to that the software drops packets Change the processing as follows: - Setup ring size registers with a headroom of 2 buffers - Decrease the counter registers with the real work done With this change no more overflow interrupts occur because the SoC disables the queues before they can overflow or hit a buffer that is still owned by the CPU. Benchmark from single stream iperf3 run, with server process running on ZyXEL XGS1210 (RTL930x). iperf3 run before ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.2.86, port 54412 [ 5] local 192.168.2.71 port 5201 connected to 192.168.2.86 port 54418 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 384 KBytes 3.14 Mbits/sec [ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 3.00-4.01 sec 5.12 MBytes 42.8 Mbits/sec [ 5] 4.01-5.00 sec 11.4 MBytes 95.8 Mbits/sec [ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec [ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec iperf3 run after ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.2.86, port 55228 [ 5] local 192.168.2.71 port 5201 connected to 192.168.2.86 port 55232 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 22.8 MBytes 191 Mbits/sec [ 5] 1.00-2.01 sec 25.4 MBytes 211 Mbits/sec [ 5] 2.01-3.00 sec 25.4 MBytes 215 Mbits/sec [ 5] 3.00-4.01 sec 26.5 MBytes 220 Mbits/sec [ 5] 4.01-5.00 sec 26.2 MBytes 222 Mbits/sec [ 5] 5.00-6.00 sec 26.9 MBytes 225 Mbits/sec [ 5] 6.00-7.00 sec 27.0 MBytes 226 Mbits/sec [ 5] 7.00-8.01 sec 26.9 MBytes 224 Mbits/sec [ 5] 8.01-9.00 sec 26.5 MBytes 223 Mbits/sec [ 5] 9.00-10.00 sec 26.8 MBytes 225 Mbits/sec [ 5] 10.00-10.02 sec 640 KBytes 224 Mbits/sec Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Link: openwrt/openwrt#19960 Signed-off-by: Robert Marko <robimarko@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Oct 23, 2025
Remove backported patches: 025-bpo-34155-Dont-parse-domains-containing-GH-13079-GH-.patch 026-bpo-38243-xmlrpc.server-Escape-the-server_title-GH-1.patch Fixes CVE-2019-16056 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
artynet
pushed a commit
that referenced
this pull request
Oct 23, 2025
apxs is used to get information about the apache installation when building external modules. Currently there are issues: 1. ./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET apache2 apxs:Error: ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/apr-1-config not found!. This error is fixed by sed script #2. 2. ./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET cannot open ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/share/apache2/build/config_vars.mk: No such file or directory at ./staging_dir/target-mips_24kc_musl/usr/bin/apxs line 213. This error is fixed by sed scipt #1. Both sed scripts taken from buildroot (see [1]). [1] https://github.com/buildroot/buildroot/blob/master/package/apache/apache.mk Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> (cherry picked from commit 83d1cda)
artynet
pushed a commit
that referenced
this pull request
Oct 23, 2025
This fixes a segfault because gnupg/g10/options.h struct opt
is otherwise not shared between the different compilation units,
resulting in opt.homedir being NULL when passed to make_filename.
$ gpg1 -i
gpg: signal 11 caught ... exiting
Segmentation fault
(gdb) bt
#0 0x00007f17bb2185e2 in strlen (s=s@entry=0x0) at src/string/strlen.c:17
#1 0x0000000000460ea0 in make_filename (first_part=first_part@entry=0x0) at gnupg-1.4.23/util/fileutil.c:174
#2 0x000000000040ee42 in keydb_add_resource (url=url@entry=0x46bfe3 "secring.gpg", flags=flags@entry=4, secret=secret@entry=1)
at gnupg-1.4.23/g10/keydb.c:238
lede-project#3 0x00000000004062ee in main (argc=<optimized out>, argv=<optimized out>) at gnupg-1.4.23/g10/gpg.c:3323
Signed-off-by: Tjeu Kayim <15987676+TjeuKayim@users.noreply.github.com>
(cherry picked from commit f4058c1)
artynet
pushed a commit
that referenced
this pull request
Dec 4, 2025
Fix kernel panic caused by downstream PHY_DETACH_NO_HW_RESET patch. [ 20.994001] airoha_eth 1fb50000.ethernet wan: validation of usxgmii with support 00,00000000,00000000,00006000 and advertisement 00,00000000,00000000,00006000 failed: -EINVAL [ 21.058106] Unable to handle kernel access to user memory outside uaccess routines at virtual address 00000000000000b8 [ 21.068879] Mem abort info: [ 21.071684] ESR = 0x0000000096000005 [ 21.075436] EC = 0x25: DABT (current EL), IL = 32 bits [ 21.080790] SET = 0, FnV = 0 [ 21.083854] EA = 0, S1PTW = 0 [ 21.086997] FSC = 0x05: level 1 translation fault [ 21.091931] Data abort info: [ 21.094829] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 21.100359] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 21.105419] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 21.110762] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000091bc8000 [ 21.117218] [00000000000000b8] pgd=0800000084ee9003, p4d=0800000084ee9003, pud=0800000084ee9003, pmd=0000000000000000 [ 21.127892] Internal error: Oops: 0000000096000005 [#1] SMP [ 21.133483] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nfte [ 21.191941] CPU: 3 UID: 0 PID: 1882 Comm: netifd Tainted: G O 6.12.57 #0 [ 21.200046] Tainted: [O]=OOT_MODULE [ 21.203534] Hardware name: Gemtek W1700K (DT) [ 21.207892] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 21.214861] pc : phy_detach+0xe8/0x194 [ 21.218628] lr : phy_detach+0xe4/0x194 [ 21.222387] sp : ffffffc0823ebae0 [ 21.225702] x29: ffffffc0823ebae0 x28: ffffff8005451c00 x27: 0000000000000000 [ 21.232846] x26: 0000000000000000 x25: 0000000000001003 x24: ffffffc080cf8240 [ 21.239990] x23: 0000000000001002 x22: ffffff807fc527f8 x21: ffffffc080c93318 [ 21.247125] x20: ffffff8001cfc000 x19: ffffff80036f7000 x18: ffffff8012cde323 [ 21.254269] x17: 303a302d30333537 x16: 000000000000000e x15: 0000005139b64de4 [ 21.261413] x14: 0000000000000001 x13: ffffff80020b46c0 x12: 0000000000000001 [ 21.268550] x11: ffffff80020b46c0 x10: ffffff8005451cc0 x9 : ffffff807dbf5200 [ 21.275694] x8 : ffffff80020b46c0 x7 : ffffff80010a8ed0 x6 : 0000000000000000 [ 21.282838] x5 : 00000000000013f8 x4 : 0000000000000000 x3 : ffffff8005451c00 [ 21.289983] x2 : 0000000000000000 x1 : ffffff8005451c00 x0 : 0000000000000000 [ 21.297128] Call trace: [ 21.299575] phy_detach+0xe8/0x194 [ 21.302988] phylink_fwnode_phy_connect+0x194/0x1c0 [ 21.307874] phylink_of_phy_connect+0x18/0x20 [ 21.312248] airoha_dev_open+0x44/0x2b0 [ 21.316094] __dev_open+0xe8/0x15c [ 21.319505] __dev_change_flags+0x154/0x1c0 [ 21.323698] dev_change_flags+0x20/0x64 [ 21.327541] dev_ifsioc+0x28c/0x444 [ 21.331032] dev_ioctl+0x290/0x4b8 [ 21.334434] sock_ioctl+0x31c/0x444 [ 21.337923] __arm64_sys_ioctl+0x354/0xe60 [ 21.342020] invoke_syscall.constprop.0+0x58/0xec [ 21.346725] do_el0_svc+0x3c/0xd4 [ 21.350041] el0_svc+0x18/0x60 [ 21.353097] el0t_64_sync_handler+0x118/0x124 [ 21.357455] el0t_64_sync+0x150/0x154 Make sure the phydev have a driver before asserting a signal or we would dereference a NULL address. Signed-off-by: Balázs Triszka <info@balika011.hu> [ improve commit description ] Link: openwrt/openwrt#20740 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Thanks for your contribution to the LEDE project!
To help keep the codebase consistent and readable,
and to help people review your contribution,
we ask you to follow the rules you find in the wiki at this link
https://lede-project.org/submitting-patches
Please remove this message before posting the pull request.