"What if a printer was 3D printed?" thats called a reprap printer, nothing new, duh!
"Alright, what if it was super cheap, about $150?" Impressive, but it's probably super small, super slow, and super low quality too. why not splurge the $350 limit you have!
"Nope, what if it was ultra fast too?" powerful motors and a 100W hotend, nothing special either-- probably eats up a TON of power!
"Can't you ever be happy?! Fine, what if it was powered by USBC?" you're kidding thats not possible blah blah blah about how a 3D printer can't be powered by USBC
The Material DELTA is an opensource delta style 3D printer, built for speed, pockets, and powered by USBC, powered by a RPi Zero 2W running klipper, with raspberry pi pico controlling motors for high speed motion.
| Category | Name | Link | Price (INR) | Price (USD) |
|---|---|---|---|---|
| CONTROLLER PARTS | NCE4080K | Link | 108 | 1.296 |
| PDC004-PD | Link | 109 | 1.308 | |
| SMBJ6.0A | Link | 20 | 0.24 | |
| 100uF 25V Electrolytic Capacitor | Link | 6 | 0.072 | |
| 1N5819 | Link | 61 | 0.732 | |
| Connector (x2) | Link | 391 | 4.692 | |
| Orpheus Pico | available @ home | 0 | 0 | |
| RPi Zero 2W | available @ home | 0 | 0 | |
| TMC2226 Stepper driver (x4) | Link | 1796 | 21.552 | |
| XL4015 Step down | Link | 75 | 0.9 | |
| XL6019E1 Step up | Link | 155 | 1.86 | |
| PRINTER PARTS | Nema 17 (x4) | Link | 2316 | 27.792 |
| Volcano heatblock | Link | 149 | 1.788 | |
| Heater | Link | 99 | 1.188 | |
| Heatbreak | Link | 169 | 2.028 | |
| CHT Nozzle (0.6mm) | Link | 129 | 1.548 | |
| Heatsink | Link | 79 | 0.948 | |
| 3010 Fan | Link | 71 | 0.852 | |
| Pneumatic connector | Link | 20 | 0.24 | |
| Tube (x2) | Link | 218 | 2.616 | |
| 2020 extrusions (5m) | Link | 1895 | 22.74 | |
| Titan extruder | Link | 399 | 4.788 | |
| Ball joints for arms | Link | 400 | 4.8 | |
| Carbon fiber arms (x2) | Link | 642 | 7.51 | |
| GT2 timing pulley (x3) | Link | 75 | 0.9 | |
| Idler pulley | Link | 65 | 0.78 | |
| GT2 timing belt | Link | 120 | 1.44 | |
| V Slot wheels (x9) | Link | 1071 | 12.852 | |
| 2040 extrusion (3m) | Link | 2646 | 31.752 | |
| 5010 blower | Link | 75 | 0.9 | |
| Thermistor | Link | 99 | 1.188 | |
| 1kg PLA | Link | 799 | 9.588 | |
| 10mm Spiral Wrapping | Link | 90 | 1.08 | |
| Round bed sticker | Link | 274 | 3.288 | |
| PVC tape | Link | 167 | 2.004 | |
| Endstop switches (x6) | Link | 240 | 2.88 | |
| FASTENERS | M3 x 12mm | Link | 26 | 0.312 |
| M3 x 25mm (x2) | Link | 60 | 0.72 | |
| M5 x 10mm (x5) | Link | 140 | 1.68 | |
| M3 Hex Nut | Link | 18 | 0.216 | |
| M5 hammernut (x50) | Link | 300 | 3.6 | |
| M2.5 x 8mm | Link | 48 | 0.576 | |
| TOTAL | ₹15500 | $186 |
Huge huge huge thanks to Hack Club and for making this possible :D
- Made new duct, with clearance and pointing right below the nozzle (instead of on it)
- Made it taller for more Z axis
- Added bowden mount for extruder
- Added filament holder
- Modelled in the boards
-
Fixed duct based on feedback from reviewers!
-
Made new filament holder
-
Added belt tensioners!
