Boot up issue with Beaglebone black.

I tried connecting an ethernet cable to my beaglebone, but for some reason I am not able to make SSH connection to it. I also tried connecting the LCD display , but on LCD all it shows is the linux logo at the boot up and then the screen remains blank forever.

So, I made use of FTDI cable to debug the possible issue with my beaglebone black with LCD screen attached to it as well, It shows following errors:

(1) bone-capemgr bone_capemgr.9: failed to load firmware 'BB-DCAN1-00A0.dtbo

(2) bone-capemgr bone_capemgr.9: slot #9: BB-UART1 conflict P9.24 (#3:BB-BONE-LCD4-01)

(3) bone-capemgr bone_capemgr.9: slot #9:Failed verification

(4) bone-capemgr bone_capemgr.9: slot #10: BB-UART2 conflict P9.21 (#7:ADAFRUIT-UART2)

(5)bone-capemgr bone_capemgr.9: slot #10: Failed

Can someone please help me out with this?

Thanks,

[pdp7]

Please re-open if still an issue with our current Debian images:
https://github.com/beagleboard/Latest-Images

Please note that the cape manager has been removed and our Debian images now use U-Boot Overlays:
https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays