[pull] master from torvalds:master #312
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…tect_depth This oops manifests itself on the following hardware: 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 103M] (rev a1) Oct 09 14:17:46 lp-sasha kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: #PF: supervisor read access in kernel mode Oct 09 14:17:46 lp-sasha kernel: #PF: error_code(0x0000) - not-present page Oct 09 14:17:46 lp-sasha kernel: PGD 0 P4D 0 Oct 09 14:17:46 lp-sasha kernel: Oops: 0000 [#1] SMP PTI Oct 09 14:17:46 lp-sasha kernel: CPU: 1 PID: 191 Comm: systemd-udevd Not tainted 5.9.0-rc8-next-20201009 #38 Oct 09 14:17:46 lp-sasha kernel: Hardware name: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.03 03/23/2009 Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 Oct 09 14:17:46 lp-sasha kernel: Call Trace: Oct 09 14:17:46 lp-sasha kernel: nouveau_connector_get_modes+0x1e6/0x240 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? kfree+0xb9/0x240 Oct 09 14:17:46 lp-sasha kernel: ? drm_connector_list_iter_next+0x7c/0xa0 Oct 09 14:17:46 lp-sasha kernel: drm_helper_probe_single_connector_modes+0x1ba/0x7c0 Oct 09 14:17:46 lp-sasha kernel: drm_client_modeset_probe+0x27e/0x1360 Oct 09 14:17:46 lp-sasha kernel: ? nvif_object_sclass_put+0xc/0x20 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? nouveau_cli_init+0x3cc/0x440 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? ktime_get_mono_fast_ns+0x49/0xa0 Oct 09 14:17:46 lp-sasha kernel: ? nouveau_drm_open+0x4e/0x180 [nouveau] Oct 09 14:17:46 lp-sasha kernel: __drm_fb_helper_initial_config_and_unlock+0x3f/0x4a0 Oct 09 14:17:46 lp-sasha kernel: ? drm_file_alloc+0x18f/0x260 Oct 09 14:17:46 lp-sasha kernel: ? mutex_lock+0x9/0x40 Oct 09 14:17:46 lp-sasha kernel: ? drm_client_init+0x110/0x160 Oct 09 14:17:46 lp-sasha kernel: nouveau_fbcon_init+0x14d/0x1c0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_device_init+0x1c0/0x880 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_probe+0x11a/0x1e0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: pci_device_probe+0xcd/0x140 Oct 09 14:17:46 lp-sasha kernel: really_probe+0xd8/0x400 Oct 09 14:17:46 lp-sasha kernel: driver_probe_device+0x4a/0xa0 Oct 09 14:17:46 lp-sasha kernel: device_driver_attach+0x9c/0xc0 Oct 09 14:17:46 lp-sasha kernel: __driver_attach+0x6f/0x100 Oct 09 14:17:46 lp-sasha kernel: ? device_driver_attach+0xc0/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_for_each_dev+0x75/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_add_driver+0x106/0x1c0 Oct 09 14:17:46 lp-sasha kernel: driver_register+0x86/0xe0 Oct 09 14:17:46 lp-sasha kernel: ? 0xffffffffa044e000 Oct 09 14:17:46 lp-sasha kernel: do_one_initcall+0x48/0x1e0 Oct 09 14:17:46 lp-sasha kernel: ? _cond_resched+0x11/0x60 Oct 09 14:17:46 lp-sasha kernel: ? kmem_cache_alloc_trace+0x19c/0x1e0 Oct 09 14:17:46 lp-sasha kernel: do_init_module+0x57/0x220 Oct 09 14:17:46 lp-sasha kernel: __do_sys_finit_module+0xa0/0xe0 Oct 09 14:17:46 lp-sasha kernel: do_syscall_64+0x33/0x40 Oct 09 14:17:46 lp-sasha kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Oct 09 14:17:46 lp-sasha kernel: RIP: 0033:0x7fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 70 0c 00 f7 d8 64 89 01 48 Oct 09 14:17:46 lp-sasha kernel: RSP: 002b:00007ffc8ad38a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Oct 09 14:17:46 lp-sasha kernel: RAX: ffffffffffffffda RBX: 0000563f6e7fd530 RCX: 00007fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000000 RSI: 00007fd01a19f95d RDI: 000000000000000f Oct 09 14:17:46 lp-sasha kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 Oct 09 14:17:46 lp-sasha kernel: R10: 000000000000000f R11: 0000000000000246 R12: 00007fd01a19f95d Oct 09 14:17:46 lp-sasha kernel: R13: 0000000000000000 R14: 0000563f6e7fbc10 R15: 0000563f6e7fd530 Oct 09 14:17:46 lp-sasha kernel: Modules linked in: nouveau(+) ttm xt_string xt_mark xt_LOG vgem v4l2_dv_timings uvcvideo ulpi udf ts_kmp ts_fsm ts_bm snd_aloop sil164 qat_dh895xccvf nf_nat_sip nf_nat_irc nf_nat_ftp nf_nat nf_log_ipv6 nf_log_ipv4 nf_log_common ltc2990 lcd intel_qat input_leds i2c_mux gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc drivetemp cuse fuse crc_itu_t coretemp ch7006 ath5k ath algif_hash Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: ---[ end trace 0ddafe218ad30017 ]--- Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 The disassembly: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 All code ======== 0: 0a 00 or (%rax),%al 2: 00 48 8b add %cl,-0x75(%rax) 5: 49 rex.WB 6: 48 c7 87 b8 00 00 00 movq $0x6,0xb8(%rdi) d: 06 00 00 00 11: 80 b9 4d 0a 00 00 00 cmpb $0x0,0xa4d(%rcx) 18: 75 1e jne 0x38 1a: 83 fa 41 cmp $0x41,%edx 1d: 75 05 jne 0x24 1f: 48 85 c0 test %rax,%rax 22: 75 29 jne 0x4d 24: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax 2a:* 39 06 cmp %eax,(%rsi) <-- trapping instruction 2c: 7c 25 jl 0x53 2e: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) 35: 75 b7 jne 0xffffffffffffffee 37: c3 retq 38: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 3f: 75 .byte 0x75 Code starting with the faulting instruction =========================================== 0: 39 06 cmp %eax,(%rsi) 2: 7c 25 jl 0x29 4: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) b: 75 b7 jne 0xffffffffffffffc4 d: c3 retq e: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 15: 75 .byte 0x75 objdump -SF --disassemble=nouveau_connector_detect_depth [...] if (nv_connector->edid && c85e1: 83 fa 41 cmp $0x41,%edx c85e4: 75 05 jne c85eb <nouveau_connector_detect_depth+0x6b> (File Offset: 0xc866b) c85e6: 48 85 c0 test %rax,%rax c85e9: 75 29 jne c8614 <nouveau_connector_detect_depth+0x94> (File Offset: 0xc8694) nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) duallink = ((u8 *)nv_connector->edid)[121] == 2; else duallink = mode->clock >= bios->fp.duallink_transition_clk; if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || c85eb: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax c85f1: 39 06 cmp %eax,(%rsi) c85f3: 7c 25 jl c861a <nouveau_connector_detect_depth+0x9a> (File Offset: 0xc869a) ( duallink && (bios->fp.strapless_is_24bit & 2))) c85f5: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) c85fc: 75 b7 jne c85b5 <nouveau_connector_detect_depth+0x35> (File Offset: 0xc8635) connector->display_info.bpc = 8; [...] % scripts/faddr2line /lib/modules/5.9.0-rc8-next-20201009/kernel/drivers/gpu/drm/nouveau/nouveau.ko nouveau_connector_detect_depth+0x71/0xc0 nouveau_connector_detect_depth+0x71/0xc0: nouveau_connector_detect_depth at /home/sasha/linux-next/drivers/gpu/drm/nouveau/nouveau_connector.c:891 It is actually line 889. See the disassembly below. 889 duallink = mode->clock >= bios->fp.duallink_transition_clk; The NULL pointer being dereferenced is mode. Git bisect has identified the following commit as bad: f28e32d drm/nouveau/kms: Don't change EDID when it hasn't actually changed Here is the chain of events that causes the oops. On entry to nouveau_connector_detect_lvds, edid is set to NULL. The call to nouveau_connector_detect sets nv_connector->edid to valid memory, with status set to connector_status_connected and the flow of execution branching to the out label. The subsequent call to nouveau_connector_set_edid erronously clears nv_connector->edid, via the local edid pointer which remains set to NULL. Fix this by setting edid to the value of the just acquired nv_connector->edid and executing the body of nouveau_connector_set_edid only if nv_connector->edid and edid point to different memory addresses thus preventing nv_connector->edid from being turned into a dangling pointer. Fixes: f28e32d ("drm/nouveau/kms: Don't change EDID when it hasn't actually changed") Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pre-NV50 chipsets don't currently use the MMU subsystem that later chipsets use, and type_vram is negative here, leading to an OOB memory access. This was previously guarded by a chipset check, restore that. Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5839172 ("drm/nouveau: explicitly specify caching to use") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It turns out that I forgot to go through and make sure that I converted all encoder callbacks to use atomic_enable/atomic_disable(), so let's go and actually do that. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 09838c4 ("drm/nouveau/kms: Search for encoders' connectors properly") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
…fixes - atomic modesetting regression fix - ttm pre-nv50 fix - connector NULL ptr deref fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5D9p78MNN0OxVeRZxN8LDqcadJEGUEFCgWJQ6+_rjPuw@mail.gmail.com
…/drm Pull drm fixes from Dave Airlie: "Nouveau fixes: - atomic modesetting regression fix - ttm pre-nv50 fix - connector NULL ptr deref fix" * tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50 drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth
pull bot
pushed a commit
that referenced
this pull request
Jun 5, 2021
In merge mode, when xdp is enabled, if the headroom of buf is smaller than virtnet_get_headroom(), xdp_linearize_page() will be called but the variable of "headroom" is still 0, which leads to wrong logic after entering page_to_skb(). [ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode [ 16.603350] #PF: error_code(0x0000) - not-present page [ 16.604200] PGD 0 P4D 0 [ 16.604686] Oops: 0000 [#1] SMP PTI [ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312 [ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04 [ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.624047] Call Trace: [ 16.624525] ? release_pages+0x24d/0x730 [ 16.625209] unmap_single_vma+0xa9/0x130 [ 16.625885] unmap_vmas+0x76/0xf0 [ 16.626480] exit_mmap+0xa0/0x210 [ 16.627129] mmput+0x67/0x180 [ 16.627673] do_exit+0x3d1/0xf10 [ 16.628259] ? do_user_addr_fault+0x231/0x840 [ 16.629000] do_group_exit+0x53/0xd0 [ 16.629631] __x64_sys_exit_group+0x1d/0x20 [ 16.630354] do_syscall_64+0x3c/0x80 [ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.631828] RIP: 0033:0x7f1a043d0191 [ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167. [ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191 [ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001 [ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490 [ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000 [ 16.640408] Modules linked in: [ 16.640958] CR2: ffffecbfff7b43c8 [ 16.641557] ---[ end trace bc4891c6ce46354c ]--- [ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.658290] Kernel panic - not syncing: Fatal exception [ 16.659613] Kernel Offset: disabled [ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: fb32856 ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pull bot
pushed a commit
that referenced
this pull request
Mar 29, 2024
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <asavkov@redhat.com> Tested-by: Puranjay Mohan <puranjay12@gmail.com> Acked-by: Puranjay Mohan <puranjay12@gmail.com> Acked-by: Xu Kuohai <xukuohai@huawei.com> Message-ID: <20240321081809.158803-1-asavkov@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )