Initial commit of code for driving a P2.5 HUB75E Panel with a Pixelated ESP32 pcb (https://pixelated.cn).
Stores config in eeprom for MQTT and WIFI settings. If no wifi saved, then will appear as an AP with name pixelated, no password. Connect to 192.168.4.1 to config, and save. Boot button is configured to erase eeprom to factory defaults, and forget wifi config (if pressed post boot).
Make output code into classes for standardization
eg
Class.init
Class.display ...
Add clock code
Add Snake code
Add initial code to setup MQTT, WIFI
Fix green boogies on output
Add more FX
MQTT subscription / control
Plasma
GIF Animation (using FFAT)
Basic menu
Conway's Game of Life
EEPROM config / Wifi Config
FFAT upload (1M Code / 3M FFAT Partition)
esptool.py --chip esp32 --baud 921600 write_flash 0x111000 img.ffat
Make the img.ffat with this - https://github.com/TobleMiner/mk_esp32fat or https://github.com/marcmerlin/esp32_fatfsimage
Install esptool from here - https://github.com/espressif/esptool or brew install esptool (on mac with https://brew.sh)
Requires https://github.com/mrfaptastic/ESP32-RGB64x32MatrixPanel-I2S-DMA
(amend #define MATRIX_HEIGHT 64 in https://github.com/mrfaptastic/ESP32-RGB64x32MatrixPanel-I2S-DMA/blob/master/ESP32-RGB64x32MatrixPanel-I2S-DMA.h)