spi: phytium: fix 'Disabling IRQ #18' #355
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
It also casue FT-D3000 board m70f request_irq register a handler 'phytium_spi_irq', which calls spi_master_get_devdata. so it should be called after spi_master_set_devdata, where the handler can really get the fts structure. Log: [ 1.535532] irq 18: nobody cared (try booting with the "irqpoll" option) [ 1.542258] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-arm64-desktop #5300 [ 1.542260] Hardware name: N/A N/A/L21K-2041K, BIOS KL4.27.BD.D.062.D 03/10/2022 [ 1.542261] Call trace: [ 1.542267] dump_backtrace+0x0/0x190 [ 1.542269] show_stack+0x14/0x20 [ 1.542273] dump_stack+0xa8/0xcc [ 1.542277] __report_bad_irq+0x48/0x100 [ 1.542279] note_interrupt+0x280/0x2e4 [ 1.542281] handle_irq_event_percpu+0x54/0x68 [ 1.542283] handle_irq_event+0x40/0x98 [ 1.542285] handle_fasteoi_irq+0xd4/0x1a0 [ 1.542287] generic_handle_irq+0x2c/0x40 [ 1.542289] __handle_domain_irq+0x60/0xb8 [ 1.542291] gic_handle_irq+0x7c/0x178 [ 1.542292] el1_irq+0xb0/0x140 [ 1.542294] __do_softirq+0x84/0x2e8 [ 1.542297] irq_exit+0x9c/0xb8 [ 1.542298] __handle_domain_irq+0x64/0xb8 [ 1.542300] gic_handle_irq+0x7c/0x178 [ 1.542301] el1_irq+0xb0/0x140 [ 1.542303] __setup_irq+0x478/0x6d8 [ 1.542305] request_threaded_irq+0xdc/0x198 [ 1.542308] phytium_spi_add_host+0x70/0x198 [ 1.542310] phytium_spi_probe+0x2ec/0x328 [ 1.542313] platform_drv_probe+0x50/0xa0 [ 1.542315] really_probe+0x23c/0x3c8 [ 1.542317] driver_probe_device+0xdc/0x130 [ 1.542318] __driver_attach+0x128/0x150 [ 1.542320] bus_for_each_dev+0x60/0x98 [ 1.542322] driver_attach+0x20/0x28 [ 1.542323] bus_add_driver+0x1a0/0x280 [ 1.542325] driver_register+0x60/0x110 [ 1.542327] __platform_driver_register+0x44/0x50 [ 1.542330] phytium_spi_driver_init+0x18/0x20 [ 1.542332] do_one_initcall+0x30/0x19c [ 1.542335] kernel_init_freeable+0x27c/0x320 [ 1.542338] kernel_init+0x10/0x100 [ 1.542340] ret_from_fork+0x10/0x18 [ 1.542341] handlers: [ 1.544611] [<0000000057fd3891>] phytium_spi_irq [ 1.549235] Disabling IRQ #18 same problem link: https://gitee.com/openeuler/kernel/commit/7e9c59f90e0d0b78aa3ad27fc2baf37b9333b41f Signed-off-by: wenlunpeng <wenlunpeng@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
deepin pr auto review关键摘要:
是否建议立即修改:
|
|
[APPROVALNOTIFIER] This PR is NOT APPROVED This pull-request has been approved by: The full list of commands accepted by this bot can be found here. DetailsNeeds approval from an approver in each of these files:Approvers can indicate their approval by writing |
opsiff
pushed a commit
to opsiff/UOS-kernel
that referenced
this pull request
Dec 29, 2025
It also casue FT-D3000 board m70f request_irq register a handler 'phytium_spi_irq', which calls spi_master_get_devdata. so it should be called after spi_master_set_devdata, where the handler can really get the fts structure. Log: [ 1.535532] irq 18: nobody cared (try booting with the "irqpoll" option) [ 1.542258] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-arm64-desktop #5300 [ 1.542260] Hardware name: N/A N/A/L21K-2041K, BIOS KL4.27.BD.D.062.D 03/10/2022 [ 1.542261] Call trace: [ 1.542267] dump_backtrace+0x0/0x190 [ 1.542269] show_stack+0x14/0x20 [ 1.542273] dump_stack+0xa8/0xcc [ 1.542277] __report_bad_irq+0x48/0x100 [ 1.542279] note_interrupt+0x280/0x2e4 [ 1.542281] handle_irq_event_percpu+0x54/0x68 [ 1.542283] handle_irq_event+0x40/0x98 [ 1.542285] handle_fasteoi_irq+0xd4/0x1a0 [ 1.542287] generic_handle_irq+0x2c/0x40 [ 1.542289] __handle_domain_irq+0x60/0xb8 [ 1.542291] gic_handle_irq+0x7c/0x178 [ 1.542292] el1_irq+0xb0/0x140 [ 1.542294] __do_softirq+0x84/0x2e8 [ 1.542297] irq_exit+0x9c/0xb8 [ 1.542298] __handle_domain_irq+0x64/0xb8 [ 1.542300] gic_handle_irq+0x7c/0x178 [ 1.542301] el1_irq+0xb0/0x140 [ 1.542303] __setup_irq+0x478/0x6d8 [ 1.542305] request_threaded_irq+0xdc/0x198 [ 1.542308] phytium_spi_add_host+0x70/0x198 [ 1.542310] phytium_spi_probe+0x2ec/0x328 [ 1.542313] platform_drv_probe+0x50/0xa0 [ 1.542315] really_probe+0x23c/0x3c8 [ 1.542317] driver_probe_device+0xdc/0x130 [ 1.542318] __driver_attach+0x128/0x150 [ 1.542320] bus_for_each_dev+0x60/0x98 [ 1.542322] driver_attach+0x20/0x28 [ 1.542323] bus_add_driver+0x1a0/0x280 [ 1.542325] driver_register+0x60/0x110 [ 1.542327] __platform_driver_register+0x44/0x50 [ 1.542330] phytium_spi_driver_init+0x18/0x20 [ 1.542332] do_one_initcall+0x30/0x19c [ 1.542335] kernel_init_freeable+0x27c/0x320 [ 1.542338] kernel_init+0x10/0x100 [ 1.542340] ret_from_fork+0x10/0x18 [ 1.542341] handlers: [ 1.544611] [<0000000057fd3891>] phytium_spi_irq [ 1.549235] Disabling IRQ deepin-community#18 same problem link: https://gitee.com/openeuler/kernel/commit/7e9c59f90e0d0b78aa3ad27fc2baf37b9333b41f Signed-off-by: wenlunpeng <wenlunpeng@uniontech.com> Link: deepin-community#355 (cherry picked from commit 050c4bf) Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
opsiff
pushed a commit
to opsiff/UOS-kernel
that referenced
this pull request
Dec 29, 2025
It also casue FT-D3000 board m70f request_irq register a handler 'phytium_spi_irq', which calls spi_master_get_devdata. so it should be called after spi_master_set_devdata, where the handler can really get the fts structure. Log: [ 1.535532] irq 18: nobody cared (try booting with the "irqpoll" option) [ 1.542258] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-arm64-desktop #5300 [ 1.542260] Hardware name: N/A N/A/L21K-2041K, BIOS KL4.27.BD.D.062.D 03/10/2022 [ 1.542261] Call trace: [ 1.542267] dump_backtrace+0x0/0x190 [ 1.542269] show_stack+0x14/0x20 [ 1.542273] dump_stack+0xa8/0xcc [ 1.542277] __report_bad_irq+0x48/0x100 [ 1.542279] note_interrupt+0x280/0x2e4 [ 1.542281] handle_irq_event_percpu+0x54/0x68 [ 1.542283] handle_irq_event+0x40/0x98 [ 1.542285] handle_fasteoi_irq+0xd4/0x1a0 [ 1.542287] generic_handle_irq+0x2c/0x40 [ 1.542289] __handle_domain_irq+0x60/0xb8 [ 1.542291] gic_handle_irq+0x7c/0x178 [ 1.542292] el1_irq+0xb0/0x140 [ 1.542294] __do_softirq+0x84/0x2e8 [ 1.542297] irq_exit+0x9c/0xb8 [ 1.542298] __handle_domain_irq+0x64/0xb8 [ 1.542300] gic_handle_irq+0x7c/0x178 [ 1.542301] el1_irq+0xb0/0x140 [ 1.542303] __setup_irq+0x478/0x6d8 [ 1.542305] request_threaded_irq+0xdc/0x198 [ 1.542308] phytium_spi_add_host+0x70/0x198 [ 1.542310] phytium_spi_probe+0x2ec/0x328 [ 1.542313] platform_drv_probe+0x50/0xa0 [ 1.542315] really_probe+0x23c/0x3c8 [ 1.542317] driver_probe_device+0xdc/0x130 [ 1.542318] __driver_attach+0x128/0x150 [ 1.542320] bus_for_each_dev+0x60/0x98 [ 1.542322] driver_attach+0x20/0x28 [ 1.542323] bus_add_driver+0x1a0/0x280 [ 1.542325] driver_register+0x60/0x110 [ 1.542327] __platform_driver_register+0x44/0x50 [ 1.542330] phytium_spi_driver_init+0x18/0x20 [ 1.542332] do_one_initcall+0x30/0x19c [ 1.542335] kernel_init_freeable+0x27c/0x320 [ 1.542338] kernel_init+0x10/0x100 [ 1.542340] ret_from_fork+0x10/0x18 [ 1.542341] handlers: [ 1.544611] [<0000000057fd3891>] phytium_spi_irq [ 1.549235] Disabling IRQ deepin-community#18 same problem link: https://gitee.com/openeuler/kernel/commit/7e9c59f90e0d0b78aa3ad27fc2baf37b9333b41f Signed-off-by: wenlunpeng <wenlunpeng@uniontech.com> Link: deepin-community#355 (cherry picked from commit 050c4bf) Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
It also casue FT-D3000 board m70f
request_irq register a handler 'phytium_spi_irq',
which calls spi_master_get_devdata.
so it should be called after spi_master_set_devdata, where the handler can really get the fts structure.
Log:
[ 1.535532] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 1.542258] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-arm64-desktop #5300
[ 1.542260] Hardware name: N/A N/A/L21K-2041K, BIOS KL4.27.BD.D.062.D 03/10/2022
[ 1.542261] Call trace:
[ 1.542267] dump_backtrace+0x0/0x190
[ 1.542269] show_stack+0x14/0x20
[ 1.542273] dump_stack+0xa8/0xcc
[ 1.542277] __report_bad_irq+0x48/0x100
[ 1.542279] note_interrupt+0x280/0x2e4
[ 1.542281] handle_irq_event_percpu+0x54/0x68
[ 1.542283] handle_irq_event+0x40/0x98
[ 1.542285] handle_fasteoi_irq+0xd4/0x1a0
[ 1.542287] generic_handle_irq+0x2c/0x40
[ 1.542289] __handle_domain_irq+0x60/0xb8
[ 1.542291] gic_handle_irq+0x7c/0x178
[ 1.542292] el1_irq+0xb0/0x140
[ 1.542294] __do_softirq+0x84/0x2e8
[ 1.542297] irq_exit+0x9c/0xb8
[ 1.542298] __handle_domain_irq+0x64/0xb8
[ 1.542300] gic_handle_irq+0x7c/0x178
[ 1.542301] el1_irq+0xb0/0x140
[ 1.542303] __setup_irq+0x478/0x6d8
[ 1.542305] request_threaded_irq+0xdc/0x198
[ 1.542308] phytium_spi_add_host+0x70/0x198
[ 1.542310] phytium_spi_probe+0x2ec/0x328
[ 1.542313] platform_drv_probe+0x50/0xa0
[ 1.542315] really_probe+0x23c/0x3c8
[ 1.542317] driver_probe_device+0xdc/0x130
[ 1.542318] __driver_attach+0x128/0x150
[ 1.542320] bus_for_each_dev+0x60/0x98
[ 1.542322] driver_attach+0x20/0x28
[ 1.542323] bus_add_driver+0x1a0/0x280
[ 1.542325] driver_register+0x60/0x110
[ 1.542327] __platform_driver_register+0x44/0x50
[ 1.542330] phytium_spi_driver_init+0x18/0x20
[ 1.542332] do_one_initcall+0x30/0x19c
[ 1.542335] kernel_init_freeable+0x27c/0x320
[ 1.542338] kernel_init+0x10/0x100
[ 1.542340] ret_from_fork+0x10/0x18
[ 1.542341] handlers:
[ 1.544611] [<0000000057fd3891>] phytium_spi_irq
[ 1.549235] Disabling IRQ #18
same problem link:
https://gitee.com/openeuler/kernel/commit/7e9c59f90e0d0b78aa3ad27fc2baf37b9333b41f