Enable rtl8xxxu driver #12
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Should be blacklisted See ev3dev/ev3dev#1115
pepijndevos
added a commit
to pepijndevos/ev3-config
that referenced
this pull request
Jun 19, 2018
dlech
pushed a commit
to ev3dev/ev3-config
that referenced
this pull request
Jun 19, 2018
Member
|
Thanks! |
dlech
pushed a commit
that referenced
this pull request
Jul 8, 2018
…sion commit 8afb1d2 upstream. Commit 40f70c0 ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Jul 8, 2018
…s_replace() commit bbb8c61 upstream. When a chain is updated, a counter can be attached. if so, the nft_counters_enabled should be increased. test commands: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 4\; } %iptables-compat -Z input %nft delete chain ip filter input we can see below messages. [ 286.443720] jump label: negative count! [ 286.448278] WARNING: CPU: 0 PID: 1459 at kernel/jump_label.c:197 __static_key_slow_dec_cpuslocked+0x6f/0xf0 [ 286.449144] Modules linked in: nf_tables nfnetlink ip_tables x_tables [ 286.449144] CPU: 0 PID: 1459 Comm: nft Tainted: G W 4.17.0-rc2+ #12 [ 286.449144] RIP: 0010:__static_key_slow_dec_cpuslocked+0x6f/0xf0 [ 286.449144] RSP: 0018:ffff88010e5176f0 EFLAGS: 00010286 [ 286.449144] RAX: 000000000000001b RBX: ffffffffc0179500 RCX: ffffffffb8a82522 [ 286.449144] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88011b7e5eac [ 286.449144] RBP: 0000000000000000 R08: ffffed00236fce5c R09: ffffed00236fce5b [ 286.449144] R10: ffffffffc0179503 R11: ffffed00236fce5c R12: 0000000000000000 [ 286.449144] R13: ffff88011a28e448 R14: ffff88011a28e470 R15: dffffc0000000000 [ 286.449144] FS: 00007f0384328700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 286.449144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.449144] CR2: 00007f038394bf10 CR3: 0000000104a86000 CR4: 00000000001006f0 [ 286.449144] Call Trace: [ 286.449144] static_key_slow_dec+0x6a/0x70 [ 286.449144] nf_tables_chain_destroy+0x19d/0x210 [nf_tables] [ 286.449144] nf_tables_commit+0x1891/0x1c50 [nf_tables] [ 286.449144] nfnetlink_rcv+0x1148/0x13d0 [nfnetlink] [ ... ] Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Sep 23, 2018
commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Jan 28, 2019
[ Upstream commit d92116b ] On OLPC XO-1, the RTC is discovered via device tree from the arch initcall. Don't let the PC platform register another one from its device initcall, it's not going to work: sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos' CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Call Trace: dump_stack+0x16/0x18 sysfs_warn_dup+0x46/0x58 sysfs_create_dir_ns+0x76/0x9b kobject_add_internal+0xed/0x209 ? __schedule+0x3fa/0x447 kobject_add+0x5b/0x66 device_add+0x298/0x535 ? insert_resource_conflict+0x2a/0x3e platform_device_add+0x14d/0x192 ? io_delay_init+0x19/0x19 platform_device_register+0x1c/0x1f add_rtc_cmos+0x16/0x31 do_one_initcall+0x78/0x14a ? do_early_param+0x75/0x75 kernel_init_freeable+0x152/0x1e0 ? rest_init+0xa2/0xa2 kernel_init+0x8/0xd5 ret_from_fork+0x2e/0x38 kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to register things with the same name in the same directory. platform rtc_cmos: registered platform RTC device (no PNP device found) Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181004160808.307738-1-lkundrak@v3.sk Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Jan 28, 2019
commit a007734 upstream. The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118) [ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148) [ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: <stable@vger.kernel.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Jan 28, 2019
commit 6cc4a08 upstream. info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dlech
pushed a commit
that referenced
this pull request
Jan 28, 2019
[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dlech
pushed a commit
that referenced
this pull request
May 9, 2019
[ Upstream commit 42dfa45 ] Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <changbin.du@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dlech
pushed a commit
that referenced
this pull request
May 9, 2019
…_event_on_all_cpus test [ Upstream commit 93faa52 ] ================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: f30a79b ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dlech
pushed a commit
that referenced
this pull request
May 9, 2019
[ Upstream commit d982b33 ] ================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 6a6cd11 ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Project516
pushed a commit
to Project516/ev3-kernel
that referenced
this pull request
Sep 9, 2025
commit 7af76e9 upstream. Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 ev3dev#12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'. The first HSR-layer function to process this frame is hsr_handle_frame(). It and then checks if the protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that the skb is long enough. For the crashing frame it is not, and hence the skb->network_header and skb->mac_len fields are set incorrectly, pointing after the end of the linear buffer. I will call this a BUG#1 and it is what is addressed by this patch. In the crashing scenario before the fix, the skb continues to go down the hsr path as follows. hsr_handle_frame() then calls this sequence hsr_forward_skb() fill_frame_info() hsr->proto_ops->fill_frame_info() hsr_fill_frame_info() hsr_fill_frame_info() contains a check that intends to check whether the skb actually contains the HSR header. But the check relies on the skb->mac_len field which was erroneously setup due to BUG#1, so the check passes and the execution continues back in the hsr_forward_skb(): hsr_forward_skb() hsr_forward_do() hsr->proto_ops->get_untagged_frame() hsr_get_untagged_frame() create_stripped_skb_hsr() In create_stripped_skb_hsr(), a copy of the skb is created and is further corrupted by operation that attempts to strip the HSR tag in a call to __pskb_copy(). The skb enters create_stripped_skb_hsr() with ethernet header pushed in linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of ethernet header into the headroom, creating skb_in with a headroom of size 8. The subsequent __pskb_copy() then creates an skb with headroom of just 2 and skb->len of just 12, this is how it looks after the copy: gdb) p skb->len $10 = 12 (gdb) p skb->data $11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373", (gdb) p skb->head $12 = (unsigned char *) 0xffff888041e45380 "" It seems create_stripped_skb_hsr() assumes that ETH header is pulled in the headroom when it's entered, because it just pulls HSR header on top. But that is not the case in our code-path and we end up with the corrupted skb instead. I will call this BUG#2 *I got confused here because it seems that under no conditions can create_stripped_skb_hsr() work well, the assumption it makes is not true during the processing of hsr frames - since the skb_push() in hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I missed something here.* Next, the execution arrives in hsr_deliver_master(). It calls skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have enough space for the pull (as it only has 12 bytes in total at this point). *The skb_pull() here further suggests that ethernet header is meant to be pushed through the whole hsr processing and create_stripped_skb_hsr() should pull it before doing the HSR header pull.* hsr_deliver_master() then puts the corrupted skb on the queue, it is then picked up from there by bridge frame handling layer and finally lands in br_dev_queue_push_xmit where it panics. Cc: stable@kernel.org Fixes: 48b491a ("net: hsr: fix mac_len checks") Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Project516
pushed a commit
to Project516/ev3-kernel
that referenced
this pull request
Dec 12, 2025
[ Upstream commit 48918ca ] The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 ev3dev#6 0x565358f6682e in run_test_child builtin-test.c:344 ev3dev#7 0x565358ef7121 in start_command run-command.c:128 ev3dev#8 0x565358f67273 in start_test builtin-test.c:545 ev3dev#9 0x565358f6771d in __cmd_test builtin-test.c:647 ev3dev#10 0x565358f682bd in cmd_test builtin-test.c:849 ev3dev#11 0x565358ee5ded in run_builtin perf.c:349 ev3dev#12 0x565358ee6085 in handle_internal_command perf.c:401 ev3dev#13 0x565358ee61de in run_argv perf.c:448 ev3dev#14 0x565358ee6527 in main perf.c:555 ev3dev#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 ev3dev#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 ev3dev#17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.ibm.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Project516
pushed a commit
to Project516/ev3-kernel
that referenced
this pull request
Dec 18, 2025
[ Upstream commit 163e5f2b96632b7fb2eaa965562aca0dbdf9f996 ]
When using perf record with the `--overwrite` option, a segmentation fault
occurs if an event fails to open. For example:
perf record -e cycles-ct -F 1000 -a --overwrite
Error:
cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
perf: Segmentation fault
#0 0x6466b6 in dump_stack debug.c:366
#1 0x646729 in sighandler_dump_stack debug.c:378
#2 0x453fd1 in sigsegv_handler builtin-record.c:722
#3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090]
#4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862
#5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943
ev3dev#6 0x458090 in record__synthesize builtin-record.c:2075
ev3dev#7 0x45a85a in __cmd_record builtin-record.c:2888
ev3dev#8 0x45deb6 in cmd_record builtin-record.c:4374
ev3dev#9 0x4e5e33 in run_builtin perf.c:349
ev3dev#10 0x4e60bf in handle_internal_command perf.c:401
ev3dev#11 0x4e6215 in run_argv perf.c:448
ev3dev#12 0x4e653a in main perf.c:555
ev3dev#13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72]
ev3dev#14 0x43a3ee in _start ??:0
The --overwrite option implies --tail-synthesize, which collects non-sample
events reflecting the system status when recording finishes. However, when
evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist
is not initialized and remains NULL. The code unconditionally calls
record__synthesize() in the error path, which iterates through the NULL
evlist pointer and causes a segfault.
To fix it, move the record__synthesize() call inside the error check block, so
it's only called when there was no error during recording, ensuring that evlist
is properly initialized.
Fixes: 4ea648a ("perf record: Add --tail-synthesize option")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This driver supports devices that don't work in the current driver, but provides worse performance for some. Should probably be blacklisted initially, as Raspbian does.
See ev3dev/ev3dev#1115