Added Pinuspad

[WilmervH]

Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.

Check off the following to let the reviewers know you've done everything:
[x] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[x] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[x] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[x] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[x] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[x] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:

• Full render including all the parts
• A few sentences about the inspiration and challenges
• BOM
• Photos of the Schematic, PCB, and case

If you're unsure about the format, make sure to check out this example and follow the format there.

If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
hackpad	✅ Ready (Inspect)	Visit Preview	💬 Add feedback	May 30, 2025 9:36pm

[taciturnaxolotl]

Nice renders!!! I love the silkscreen art :)

My approved hackpad: #417

[nathantsai1]

Hi @WilmervH,

Nice hackpad! Just a few minor things...

• If you put the diodes the way they are, your key switches will not have rgb. You must add them horizontally and under the three holes of each key switch
• add .gbr and .gbrjob files to your hackpad

Otherwise it looks good!
I approve of this submission! Here's my own approved PR link: #228

[WilmervH]

Hi @nathantsai1,

I have added the gerber files in the (hopefully) proper format.

Could you elaborate what you mean by "rgb". My design doesn't include neopixels.

[nathantsai1]

@WilmervH By 'rgb', I meant that having your diodes next to the key switch on the pcb will not light up the switch as well as putting the diode in the switch. It should be roughly in the bottom part of the switch(as seen in the rectangle in the bottom part of the left picture of the dimensions)

[WilmervH]

@nathantsai1 I really tried to understand what you mean but I can't figure it out. The diodes I believe you're talking about are 1N4148 which are just basic diodes used for the key matrix, they are not light emitting ones (LEDs). Also the mx-style switches I have don't have built-in LEDs. Please see the attached picture of my schematic. Could you clarify which diodes you mean or if perhaps you mistook them for something else.

[WilmervH]

Hi @qcoral, could you remove the "Hackboard" label as this is a hackpad. Thank you!

[nathantsai1]

MB. I thought the diodes were for light.
LGTM, here's my approved hackpad: #228

[M0HID]

Hey there! Moving on with the new submission flow, please could you make a new repo for this and add it to the canvas in #hackpad? Thanks!