Btrfs device related enhancements #3

asj · 2015-10-07T14:09:28Z

Please consider these fixes, in the area of handling devices and sysfs. Mainly they are bug fixes and framework changes. And towards the end of this patch set, I have two patches which are introducing two new features, device delete by devid and sysfs attributes for btrfs pool. These patches were sent to mailing list before.
Kindly note few of the subject are changed for good and to backtrack the old subject are maintained in the changelog. Also the review comment changes that some of the patches went through are also in the changelog, which probably should be deleted when merged.

Thanks, Anand

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

This will return EIO when __bread() fails to read SB, instead of EINVAL. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

…INTK defined error handling logic behaves differently with or without CONFIG_PRINTK defined, since there are two copies of the same function which a bit of different logic One, when CONFIG_PRINTK is defined, code is __btrfs_std_error(..) { :: save_error_info(fs_info); if (sb->s_flags & MS_BORN) btrfs_handle_error(fs_info); } and two when CONFIG_PRINTK is not defined, the code is __btrfs_std_error(..) { :: if (sb->s_flags & MS_BORN) { save_error_info(fs_info); btrfs_handle_error(fs_info); } } I doubt if this was intentional ? and appear to have caused since we maintain two copies of the same function and they got diverged with commits. Now to decide which logic is correct reviewed changes as below, 533574c Commit added two copies of this function cf79ffb Commit made change to only one copy of the function and to the copy when CONFIG_PRINTK is defined. To fix this, instead of maintaining two copies of same function approach, maintain single function, and just put the extra portion of the code under CONFIG_PRINTK define. This patch just does that. And keeps code of with CONFIG_PRINTK defined. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_error() and btrfs_std_error() does the same thing and calls _btrfs_std_error(), so consolidate them together. And the main motivation is that btrfs_error() is closely named with btrfs_err(), one handles error action the other is to log the error, so don't closely name them. Signed-off-by: Anand Jain <anand.jain@oracle.com> Suggested-by: David Sterba <dsterba@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

…ot found Use btrfs specific error code BTRFS_ERROR_DEV_MISSING_NOT_FOUND instead of -ENOENT. Next this removes the logging when user specifies "missing" and we don't find it in the kernel device list. Logging are for system events not for user input errors. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

This uses a chunk of code from btrfs_read_dev_super() and creates a function called btrfs_read_dev_one_super() so that next patch can use it for scratch superblock. Signed-off-by: Anand Jain <anand.jain@oracle.com> [renamed bufhead to bh] Signed-off-by: David Sterba <dsterba@suse.com>

This patch updates and renames btrfs_scratch_superblocks, (which is used by the replace device thread), with those fixes from the scratch superblock code section of btrfs_rm_device(). The fixes are: Scratch all copies of superblock Notify kobject that superblock has been changed Update time on the device So that btrfs_rm_device() can use the function btrfs_scratch_superblocks() instead of its own scratch code. And further replace deivce code which similarly releases device back to the system, will have the fixes from the btrfs device delete. Signed-off-by: Anand Jain <anand.jain@oracle.com> [renamed to btrfs_scratch_superblock] Signed-off-by: David Sterba <dsterba@suse.com>

By general rule of thumb there shouldn't be any way that user land could trigger a kernel operation just by sending wrong arguments. Here do commit cleanups after user input has been verified. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Originally the message was not in a helper but ended up there. We should print error messages from callers instead. Signed-off-by: Anand Jain <anand.jain@oracle.com> [reworded subject and changelog] Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Anand Jain <anand.jain@oracle.com> [reworded subject and changelog] Signed-off-by: David Sterba <dsterba@suse.com>

To avoid deadlock described in commit 084b6e7 ("btrfs: Fix a lockdep warning when running xfstest."), we should move kobj stuff out of dev_replace lock range. "It is because the btrfs_kobj_{add/rm}_device() will call memory allocation with GFP_KERNEL, which may flush fs page cache to free space, waiting for it self to do the commit, causing the deadlock. To solve the problem, move btrfs_kobj_{add/rm}_device() out of the dev_replace lock range, also involing split the btrfs_rm_dev_replace_srcdev() function into remove and free parts. Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are called out of the lock range." Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> [added lockup description] Signed-off-by: David Sterba <dsterba@suse.com>

This patch will log return value of add/del_qgroup_relation() and pass the err code of btrfs_run_qgroups to the btrfs_std_error(). Signed-off-by: Anand Jain <anand.jain@oracle.com>

A part of code from btrfs_scan_one_device() is moved to a new function btrfs_read_disk_super(), so that former function looks cleaner and moves the code to ensure null terminating label to it as well. Further there is opportunity to merge various duplicate code on read disk super. Earlier attempt on this was highlighted that there was some issues for which there are multiple versions, however it was not clear what was issue. So until its worked out we can keep it in a separate function. Signed-off-by: Anand Jain <anand.jain@oracle.com>

Optional Label may or may not be set, or it might be set at some time later. However while debugging to search through the kernel logs the scripts would need the logs to be consistent, so logs search key words shouldn't depend on the optional variables, instead fsid is better. Signed-off-by: Anand Jain <anand.jain@oracle.com>

From the issue diagnosable point of view, log if the device path is changed. Signed-off-by: Anand Jain <anand.jain@oracle.com>

Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by: Anand Jain <anand.jain@oracle.com>

This adds an enhancement to show the seed fsid and its devices on the btrfs sysfs. The way sprouting handles fs_devices: clone seed fs_devices and add to the fs_uuids mem copy seed fs_devices and assign to fs_devices->seed (move dev_list) evacuate seed fs_devices contents to hold sprout fs devices contents So to be inline with this fs_devices changes during seeding, represent seed fsid under the sprout fsid, this is achieved by using the kobject_move() The end result will be, /sys/fs/btrfs/sprout-fsid/seed/level-1-seed-fsid/seed/(if)level-2-seed-fsid Signed-off-by: Anand Jain <anand.jain@oracle.com>

We need fsid kobject to hold pool attributes however its created only when fs is mounted. So, this patch changes the life cycle of the fsid and devices kobjects /sys/fs/btrfs/<fsid> and /sys/fs/btrfs/<fsid>/devices, from created and destroyed by mount and unmount event to created and destroyed by scanned and module-unload events respectively. However this does not alter life cycle of fs attributes as such. Signed-off-by: Anand Jain <anand.jain@oracle.com>

move a section of btrfs_rm_device() code to check for min number of the devices into the function __check_raid_min_devices() v2: commit update and title renamed from Btrfs: move check for min number of devices to a function Signed-off-by: Anand Jain <anand.jain@oracle.com>

__check_raid_min_device() which was pealed from btrfs_rm_device() maintianed its original code to show the block move. This patch cleans up __check_raid_min_device(). Signed-off-by: Anand Jain <anand.jain@oracle.com>

The patch renames btrfs_dev_replace_find_srcdev() to btrfs_find_device_by_user_input() and moves it to volumes.c. so that delete device can use it. v2: changed title from 'Btrfs: create rename btrfs_dev_replace_find_srcdev()' and commit update Signed-off-by: Anand Jain <anand.jain@oracle.com>

btrfs_rm_device() has a section of the code which can be replaced btrfs_find_device_by_user_input() Signed-off-by: Anand Jain <anand.jain@oracle.com>

The operation of device replace and device delete follows same steps upto some depth with in btrfs kernel, however they don't share codes. This enhancement will help replace and delete to share codes. Btrfs: enhance check device_path in btrfs_find_device_by_user_input() Signed-off-by: Anand Jain <anand.jain@oracle.com>

With the previous patches now the btrfs_scratch_superblocks() is ready to be used in btrfs_rm_device() so use it. Signed-off-by: Anand Jain <anand.jain@oracle.com>

This patch makes btrfs_fs_devices and btrfs_device information readable from sysfs. This uses the sysfs group visible entry point to mark certain attributes visible/hidden depending the FS state. The new extended layout is as shown below. /sys/fs/btrfs/ ./7b047f4d-c2ce-4f22-94a3-68c09057f1bf* fsid* missing_devices num_devices* open_devices opened* rotating rw_devices seeding total_devices* total_rw_bytes ./e6701882-220a-4416-98ac-a99f095bddcc* active_pending bdev bytes_used can_discard devid* dev_root_fsid devstats_valid dev_totalbytes generation* in_fs_metadata io_align io_width missing name* nobarriers replace_tgtdev sector_size total_bytes type uuid* writeable (* indicates that attribute will be visible even when device is unmounted but registered with btrfs kernel) v2: use btrfs_error() not btrfs_err() reword subject form : Btrfs: add sysfs layout to show btrfs_fs_devices and btrfs_device attributes Signed-off-by: Anand Jain <anand.jain@oracle.com>

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...] Fixes: c8000de ("HID: multitouch: Add support for GT7868Q") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When a large VM, specifically one that holds a significant number of PTEs, gets abruptly destroyed, the following warning is seen during the page-table walk: sched: CPU 0 need_resched set for > 100018840 ns (100 ticks) without schedule CPU: 0 UID: 0 PID: 9617 Comm: kvm_page_table_ Tainted: G O 6.16.0-smp-DEV #3 NONE Tainted: [O]=OOT_MODULE Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x3c/0xb8 dump_stack+0x18/0x30 resched_latency_warn+0x7c/0x88 sched_tick+0x1c4/0x268 update_process_times+0xa8/0xd8 tick_nohz_handler+0xc8/0x168 __hrtimer_run_queues+0x11c/0x338 hrtimer_interrupt+0x104/0x308 arch_timer_handler_phys+0x40/0x58 handle_percpu_devid_irq+0x8c/0x1b0 generic_handle_domain_irq+0x48/0x78 gic_handle_irq+0x1b8/0x408 call_on_irq_stack+0x24/0x30 do_interrupt_handler+0x54/0x78 el1_interrupt+0x44/0x88 el1h_64_irq_handler+0x18/0x28 el1h_64_irq+0x84/0x88 stage2_free_walker+0x30/0xa0 (P) __kvm_pgtable_walk+0x11c/0x258 __kvm_pgtable_walk+0x180/0x258 __kvm_pgtable_walk+0x180/0x258 __kvm_pgtable_walk+0x180/0x258 kvm_pgtable_walk+0xc4/0x140 kvm_pgtable_stage2_destroy+0x5c/0xf0 kvm_free_stage2_pgd+0x6c/0xe8 kvm_uninit_stage2_mmu+0x24/0x48 kvm_arch_flush_shadow_all+0x80/0xa0 kvm_mmu_notifier_release+0x38/0x78 __mmu_notifier_release+0x15c/0x250 exit_mmap+0x68/0x400 __mmput+0x38/0x1c8 mmput+0x30/0x68 exit_mm+0xd4/0x198 do_exit+0x1a4/0xb00 do_group_exit+0x8c/0x120 get_signal+0x6d4/0x778 do_signal+0x90/0x718 do_notify_resume+0x70/0x170 el0_svc+0x74/0xd8 el0t_64_sync_handler+0x60/0xc8 el0t_64_sync+0x1b0/0x1b8 The warning is seen majorly on the host kernels that are configured not to force-preempt, such as CONFIG_PREEMPT_NONE=y. To avoid this, instead of walking the entire page-table in one go, split it into smaller ranges, by checking for cond_resched() between each range. Since the path is executed during VM destruction, after the page-table structure is unlinked from the KVM MMU, relying on cond_resched_rwlock_write() isn't necessary. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Suggested-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250820162242.2624752-3-rananta@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== vxlan: Fix NPDs when using nexthop objects With FDB nexthop groups, VXLAN FDB entries do not necessarily point to a remote destination but rather to an FDB nexthop group. This means that first_remote_{rcu,rtnl}() can return NULL and a few places in the driver were not ready for that, resulting in NULL pointer dereferences. Patches #1-#2 fix these NPDs. Note that vxlan_fdb_find_uc() still dereferences the remote returned by first_remote_rcu() without checking that it is not NULL, but this function is only invoked by a single driver which vetoes the creation of FDB nexthop groups. I will patch this in net-next to make the code less fragile. Patch #3 adds a selftests which exercises these code paths and tests basic Tx functionality with FDB nexthop groups. I verified that the test crashes the kernel without the first two patches. ==================== Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #3 - Invalidate nested MMUs upon freeing the PGD to avoid WARNs when visiting from an MMU notifier - Fixes to the TLB match process and TLB invalidation range for managing the VCNR pseudo-TLB - Prevent SPE from erroneously profiling guests due to UNKNOWN reset values in PMSCR_EL1 - Fix save/restore of host MDCR_EL2 to account for eagerly programming at vcpu_load() on VHE systems - Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios where an xarray's spinlock was nested with a *raw* spinlock - Permit stage-2 read permission aborts which are possible in the case of NV depending on the guest hypervisor's stage-2 translation - Call raw_spin_unlock() instead of the internal spinlock API - Fix parameter ordering when assigning VBAR_EL1

This fixes the following UAF caused by not properly locking hdev when processing HCI_EV_NUM_COMP_PKTS: BUG: KASAN: slab-use-after-free in hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 Read of size 4 at addr ffff8880740f0940 by task kworker/u11:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u11:0 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci1 hci_rx_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 hci_num_comp_pkts_evt+0x1c8/0xa50 net/bluetooth/hci_event.c:4404 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 le_conn_complete_evt+0x3d6/0x1220 net/bluetooth/hci_event.c:5628 hci_le_enh_conn_complete_evt+0x189/0x470 net/bluetooth/hci_event.c:5794 hci_event_func net/bluetooth/hci_event.c:7474 [inline] hci_event_packet+0x78c/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Freed by task 9572: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_abort_conn_sync+0x5d1/0xdf0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: 134f4b3 ("Bluetooth: add support for skb TX SND/COMPLETION timestamping") Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following UFA in hci_acl_create_conn_sync where a connection still pending is command submission (conn->state == BT_OPEN) maybe freed, also since this also can happen with the likes of hci_le_create_conn_sync fix it as well: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541 CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci3 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 123736: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline] hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634 pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x54b/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 103680: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Last potentially related work creation: kasan_save_stack+0x3e/0x60 mm/kasan/common.c:47 kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:548 insert_work+0x3d/0x330 kernel/workqueue.c:2183 __queue_work+0xbd9/0xfe0 kernel/workqueue.c:2345 queue_delayed_work_on+0x18b/0x280 kernel/workqueue.c:2561 pairing_complete+0x1e7/0x2b0 net/bluetooth/mgmt.c:3451 pairing_complete_cb+0x1ac/0x230 net/bluetooth/mgmt.c:3487 hci_connect_cfm include/net/bluetooth/hci_core.h:2064 [inline] hci_conn_failed+0x24d/0x310 net/bluetooth/hci_conn.c:1275 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: aef2aa4 ("Bluetooth: hci_event: Fix creating hci_conn object on error status") Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We check the version of SPE twice, and we'll add one more check in the next commit so factor out a macro to do this. Change the #3 magic number to the actual SPE version define (V1p2) to make it more readable. No functional changes intended. Tested-by: Leo Yan <leo.yan@arm.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>

The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 #6 0x565358f6682e in run_test_child builtin-test.c:344 #7 0x565358ef7121 in start_command run-command.c:128 #8 0x565358f67273 in start_test builtin-test.c:545 #9 0x565358f6771d in __cmd_test builtin-test.c:647 #10 0x565358f682bd in cmd_test builtin-test.c:849 torvalds#11 0x565358ee5ded in run_builtin perf.c:349 torvalds#12 0x565358ee6085 in handle_internal_command perf.c:401 torvalds#13 0x565358ee61de in run_argv perf.c:448 torvalds#14 0x565358ee6527 in main perf.c:555 torvalds#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.ibm.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Don't emulate branch instructions, e.g. CALL/RET/JMP etc., that are affected by Shadow Stacks and/or Indirect Branch Tracking when said features are enabled in the guest, as fully emulating CET would require significant complexity for no practical benefit (KVM shouldn't need to emulate branch instructions on modern hosts). Simply doing nothing isn't an option as that would allow a malicious entity to subvert CET protections via the emulator. To detect instructions that are subject to IBT or affect IBT state, use the existing IsBranch flag along with the source operand type to detect indirect branches, and the existing NearBranch flag to detect far JMPs and CALLs, all of which are effectively indirect. Explicitly check for emulation of IRET, FAR RET (IMM), and SYSEXIT (the ret-like far branches) instead of adding another flag, e.g. IsRet, as it's unlikely the emulator will ever need to check for return-like instructions outside of this one specific flow. Use an allow-list instead of a deny-list because (a) it's a shorter list and (b) so that a missed entry gets a false positive, not a false negative (i.e. reject emulation instead of clobbering CET state). For Shadow Stacks, explicitly track instructions that directly affect the current SSP, as KVM's emulator doesn't have existing flags that can be used to precisely detect such instructions. Alternatively, the em_xxx() helpers could directly check for ShadowStack interactions, but using a dedicated flag is arguably easier to audit, and allows for handling both IBT and SHSTK in one fell swoop. Note! On far transfers, do NOT consult the current privilege level and instead treat SHSTK/IBT as being enabled if they're enabled for User *or* Supervisor mode. On inter-privilege level far transfers, SHSTK and IBT can be in play for the target privilege level, i.e. checking the current privilege could get a false negative, and KVM doesn't know the target privilege level until emulation gets under way. Note #2, FAR JMP from 64-bit mode to compatibility mode interacts with the current SSP, but only to ensure SSP[63:32] == 0. Don't tag FAR JMP as SHSTK, which would be rather confusing and would result in FAR JMP being rejected unnecessarily the vast majority of the time (ignoring that it's unlikely to ever be emulated). A future commit will add the #GP(0) check for the specific FAR JMP scenario. Note #3, task switches also modify SSP and so need to be rejected. That too will be addressed in a future commit. Suggested-by: Chao Gao <chao.gao@intel.com> Originally-by: Yang Weijiang <weijiang.yang@intel.com> Cc: Mathias Krause <minipli@grsecurity.net> Cc: John Allen <john.allen@amd.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20250919223258.1604852-19-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

Before disabling SR-IOV via config space accesses to the parent PF, sriov_disable() first removes the PCI devices representing the VFs. Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()") such removal operations are serialized against concurrent remove and rescan using the pci_rescan_remove_lock. No such locking was ever added in sriov_disable() however. In particular when commit 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device removal into sriov_del_vfs() there was still no locking around the pci_iov_remove_virtfn() calls. On s390 the lack of serialization in sriov_disable() may cause double remove and list corruption with the below (amended) trace being observed: PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56) GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001 00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480 0000000000000001 0000000000000000 0000000000000000 0000000180692828 00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8 #0 [3800313fb20] device_del at c9158ad5c #1 [3800313fb88] pci_remove_bus_device at c915105ba #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198 #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0 #4 [3800313fc60] zpci_bus_remove_device at c90fb6104 #5 [3800313fca0] __zpci_event_availability at c90fb3dca #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2 #7 [3800313fd60] crw_collect_info at c91905822 #8 [3800313fe10] kthread at c90feb390 #9 [3800313fe68] __ret_from_fork at c90f6aa64 #10 [3800313fe98] ret_from_fork at c9194f3f2. This is because in addition to sriov_disable() removing the VFs, the platform also generates hot-unplug events for the VFs. This being the reverse operation to the hotplug events generated by sriov_enable() and handled via pdev->no_vf_scan. And while the event processing takes pci_rescan_remove_lock and checks whether the struct pci_dev still exists, the lack of synchronization makes this checking racy. Other races may also be possible of course though given that this lack of locking persisted so long observable races seem very rare. Even on s390 the list corruption was only observed with certain devices since the platform events are only triggered by config accesses after the removal, so as long as the removal finished synchronously they would not race. Either way the locking is missing so fix this by adding it to the sriov_del_vfs() helper. Just like PCI rescan-remove, locking is also missing in sriov_add_vfs() including for the error case where pci_stop_and_remove_bus_device() is called without the PCI rescan-remove lock being held. Even in the non-error case, adding new PCI devices and buses should be serialized via the PCI rescan-remove lock. Add the necessary locking. Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Julian Ruess <julianr@linux.ibm.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com

The ns_bpf_qdisc selftest triggers a kernel panic: Oops[#1]: CPU 0 Unable to handle kernel paging request at virtual address 0000000000741d58, era == 90000000851b5ac0, ra == 90000000851b5aa4 CPU: 0 UID: 0 PID: 449 Comm: test_progs Tainted: G OE 6.16.0+ #3 PREEMPT(full) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000851b5ac0 ra 90000000851b5aa4 tp 90000001076b8000 sp 90000001076bb600 a0 0000000000741ce8 a1 0000000000000001 a2 90000001076bb5c0 a3 0000000000000008 a4 90000001004c4620 a5 9000000100741ce8 a6 0000000000000000 a7 0100000000000000 t0 0000000000000010 t1 0000000000000000 t2 9000000104d24d30 t3 0000000000000001 t4 4f2317da8a7e08c4 t5 fffffefffc002f00 t6 90000001004c4620 t7 ffffffffc61c5b3d t8 0000000000000000 u0 0000000000000001 s9 0000000000000050 s0 90000001075bc800 s1 0000000000000040 s2 900000010597c400 s3 0000000000000008 s4 90000001075bc880 s5 90000001075bc8f0 s6 0000000000000000 s7 0000000000741ce8 s8 0000000000000000 ra: 90000000851b5aa4 __qdisc_run+0xac/0x8d8 ERA: 90000000851b5ac0 __qdisc_run+0xc8/0x8d8 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000741d58 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)] Process test_progs (pid: 449, threadinfo=000000009af02b3a, task=00000000e9ba4956) Stack : 0000000000000000 90000001075bc8ac 90000000869524a8 9000000100741ce8 90000001075bc800 9000000100415300 90000001075bc8ac 0000000000000000 900000010597c400 900000008694a000 0000000000000000 9000000105b59000 90000001075bc800 9000000100741ce8 0000000000000050 900000008513000c 9000000086936000 0000000100094d4c fffffff400676208 0000000000000000 9000000105b59000 900000008694a000 9000000086bf0dc0 9000000105b59000 9000000086bf0d68 9000000085147010 90000001075be788 0000000000000000 9000000086bf0f98 0000000000000001 0000000000000010 9000000006015840 0000000000000000 9000000086be6c40 0000000000000000 0000000000000000 0000000000000000 4f2317da8a7e08c4 0000000000000101 4f2317da8a7e08c4 ... Call Trace: [<90000000851b5ac0>] __qdisc_run+0xc8/0x8d8 [<9000000085130008>] __dev_queue_xmit+0x578/0x10f0 [<90000000853701c0>] ip6_finish_output2+0x2f0/0x950 [<9000000085374bc8>] ip6_finish_output+0x2b8/0x448 [<9000000085370b24>] ip6_xmit+0x304/0x858 [<90000000853c4438>] inet6_csk_xmit+0x100/0x170 [<90000000852b32f0>] __tcp_transmit_skb+0x490/0xdd0 [<90000000852b47fc>] tcp_connect+0xbcc/0x1168 [<90000000853b9088>] tcp_v6_connect+0x580/0x8a0 [<90000000852e7738>] __inet_stream_connect+0x170/0x480 [<90000000852e7a98>] inet_stream_connect+0x50/0x88 [<90000000850f2814>] __sys_connect+0xe4/0x110 [<90000000850f2858>] sys_connect+0x18/0x28 [<9000000085520c94>] do_syscall+0x94/0x1a0 [<9000000083df1fb8>] handle_syscall+0xb8/0x158 Code: 4001ad80 2400873 2400832d <240073cc> 001137ff 001133ff 6407b41f 001503cc 0280041d ---[ end trace 0000000000000000 ]--- The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer is treated as a 32bit value and sign extend to 64bit in epilogue. This behavior is right for most bpf prog types but wrong for struct ops which requires LoongArch ABI. So let's sign extend struct ops return values according to the LoongArch ABI ([1]) and return value spec in function model. [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html Cc: stable@vger.kernel.org Fixes: 6abf17d ("LoongArch: BPF: Add struct ops support for trampoline") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Expand the prefault memory selftest to add a regression test for a KVM bug where KVM's retry logic would result in (breakable) deadlock due to the memslot deletion waiting on prefaulting to release SRCU, and prefaulting waiting on the memslot to fully disappear (KVM uses a two-step process to delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a. INVALID, memslot is encountered). To exercise concurrent memslot remove, spawn a second thread to initiate memslot removal at roughly the same time as prefaulting. Test memslot removal for all testcases, i.e. don't limit concurrent removal to only the success case. There are essentially three prefault scenarios (so far) that are of interest: 1. Success 2. ENOENT due to no memslot 3. EAGAIN due to INVALID memslot For all intents and purposes, #1 and #2 are mutually exclusive, or rather, easier to test via separate testcases since writing to non-existent memory is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is actually more complex than testing memslot removal for all scenarios. The only requirement to let memslot removal coexist with other scenarios is a way to guarantee a stable result, e.g. that the "no memslot" test observes ENOENT, not EAGAIN, for the final checks. So, rather than make memslot removal mutually exclusive with the ENOENT scenario, simply restore the memslot and retry prefaulting. For the "no memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should always fail with ENOENT regardless of how many times userspace attempts prefaulting. Pass in both the base GPA and the offset (instead of the "full" GPA) so that the worker can recreate the memslot. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20250924174255.2141847-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

The original code causes a circular locking dependency found by lockdep. ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U ------------------------------------------------------ xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660 but task is already holding lock: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devcd->mutex){+.+.}-{3:3}: mutex_lock_nested+0x4e/0xc0 devcd_data_write+0x27/0x90 sysfs_kf_bin_write+0x80/0xf0 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (kn->active#236){++++}-{0:0}: kernfs_drain+0x1e2/0x200 __kernfs_remove+0xae/0x400 kernfs_remove_by_name_ns+0x5d/0xc0 remove_files+0x54/0x70 sysfs_remove_group+0x3d/0xa0 sysfs_remove_groups+0x2e/0x60 device_remove_attrs+0xc7/0x100 device_del+0x15d/0x3b0 devcd_del+0x19/0x30 process_one_work+0x22b/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11c/0x250 ret_from_fork+0x26c/0x2e0 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}: __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 __flush_work+0x27a/0x660 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devcd->mutex); lock(kn->active#236); lock(&devcd->mutex); lock((work_completion)(&(&devcd->del_wk)->work)); *** DEADLOCK *** 5 locks held by xe_fault_inject/5091: #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660 stack backtrace: CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)} Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021 Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 dump_stack+0x10/0x20 print_circular_bug+0x285/0x360 check_noncircular+0x135/0x150 ? register_lock_class+0x48/0x4a0 __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 ? __flush_work+0x25d/0x660 ? mark_held_locks+0x46/0x90 ? __flush_work+0x25d/0x660 __flush_work+0x27a/0x660 ? __flush_work+0x25d/0x660 ? trace_hardirqs_on+0x1e/0xd0 ? __pfx_wq_barrier_func+0x10/0x10 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 ? bus_find_device+0xa8/0xe0 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 ? __f_unlock_pos+0x15/0x20 ? __x64_sys_getdents64+0x9b/0x130 ? __pfx_filldir64+0x10/0x10 ? do_syscall_64+0x1a2/0xb60 ? clear_bhb_loop+0x30/0x80 ? clear_bhb_loop+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x76e292edd574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574 RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063 R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000 </TASK> xe 0000:03:00.0: [drm] Xe device coredump has been deleted. Fixes: 01daccf ("devcoredump : Serialize devcd_del work") Cc: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Danilo Krummrich <dakr@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250723142416.1020423-1-dev@lankhorst.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Acked-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20251023082925.351307-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit 648ef13) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add VMX exit handlers for SEAMCALL and TDCALL to inject a #UD if a non-TD guest attempts to execute SEAMCALL or TDCALL. Neither SEAMCALL nor TDCALL is gated by any software enablement other than VMXON, and so will generate a VM-Exit instead of e.g. a native #UD when executed from the guest kernel. Note! No unprivileged DoS of the L1 kernel is possible as TDCALL and SEAMCALL #GP at CPL > 0, and the CPL check is performed prior to the VMX non-root (VM-Exit) check, i.e. userspace can't crash the VM. And for a nested guest, KVM forwards unknown exits to L1, i.e. an L2 kernel can crash itself, but not L1. Note #2! The Intel® Trust Domain CPU Architectural Extensions spec's pseudocode shows the CPL > 0 check for SEAMCALL coming _after_ the VM-Exit, but that appears to be a documentation bug (likely because the CPL > 0 check was incorrectly bundled with other lower-priority #GP checks). Testing on SPR and EMR shows that the CPL > 0 check is performed before the VMX non-root check, i.e. SEAMCALL #GPs when executed in usermode. Note #3! The aforementioned Trust Domain spec uses confusing pseudocode that says that SEAMCALL will #UD if executed "inSEAM", but "inSEAM" specifically means in SEAM Root Mode, i.e. in the TDX-Module. The long- form description explicitly states that SEAMCALL generates an exit when executed in "SEAM VMX non-root operation". But that's a moot point as the TDX-Module injects #UD if the guest attempts to execute SEAMCALL, as documented in the "Unconditionally Blocked Instructions" section of the TDX-Module base specification. Cc: stable@vger.kernel.org Cc: Kai Huang <kai.huang@intel.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20251016182148.69085-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.18, take #3 - Only adjust the ID registers when no irqchip has been created once per VM run, instead of doing it once per vcpu, as this otherwise triggers a pretty bad conbsistency check failure in the sysreg code. - Make sure the per-vcpu Fine Grain Traps are computed before we load the system registers on the HW, as we otherwise start running without anything set until the first preemption of the vcpu.

For some reason, of_find_node_with_property() is creating a spinlock recursion issue along with fwnode_count_parents(), and this issue is making all MediaTek boards unbootable. As of kernel v6.18-rc6, there are only three users of this function, one of which is this driver. Migrate away from of_find_node_with_property() by adding a local scpsys_get_legacy_regmap_node() function, which acts similarly to of_find_node_with_property(), and calling the former in place of the latter. This resolves the following spinlock recursion issue: [ 1.773979] BUG: spinlock recursion on CPU#2, kworker/u24:1/60 [ 1.790485] lock: devtree_lock+0x0/0x40, .magic: dead4ead, .owner: kworker/u24:1/60, .owner_cpu: 2 [ 1.791644] CPU: 2 UID: 0 PID: 60 Comm: kworker/u24:1 Tainted: G W 6.18.0-rc6 #3 PREEMPT [ 1.791649] Tainted: [W]=WARN [ 1.791650] Hardware name: MediaTek Genio-510 EVK (DT) [ 1.791653] Workqueue: events_unbound deferred_probe_work_func [ 1.791658] Call trace: [ 1.791659] show_stack+0x18/0x30 (C) [ 1.791664] dump_stack_lvl+0x68/0x94 [ 1.791668] dump_stack+0x18/0x24 [ 1.791672] spin_dump+0x78/0x88 [ 1.791678] do_raw_spin_lock+0x110/0x140 [ 1.791684] _raw_spin_lock_irqsave+0x58/0x6c [ 1.791690] of_get_parent+0x28/0x74 [ 1.791694] of_fwnode_get_parent+0x38/0x7c [ 1.791700] fwnode_count_parents+0x34/0xf0 [ 1.791705] fwnode_full_name_string+0x28/0x120 [ 1.791710] device_node_string+0x3e4/0x50c [ 1.791715] pointer+0x294/0x430 [ 1.791718] vsnprintf+0x21c/0x5bc [ 1.791722] vprintk_store+0x108/0x47c [ 1.791728] vprintk_emit+0xc4/0x350 [ 1.791732] vprintk_default+0x34/0x40 [ 1.791736] vprintk+0x24/0x30 [ 1.791740] _printk+0x60/0x8c [ 1.791744] of_node_release+0x154/0x194 [ 1.791749] kobject_put+0xa0/0x120 [ 1.791753] of_node_put+0x18/0x28 [ 1.791756] of_find_node_with_property+0x74/0x100 [ 1.791761] scpsys_probe+0x338/0x5e0 [ 1.791765] platform_probe+0x5c/0xa4 [ 1.791770] really_probe+0xbc/0x2ac [ 1.791774] __driver_probe_device+0x78/0x118 [ 1.791779] driver_probe_device+0x3c/0x170 [ 1.791783] __device_attach_driver+0xb8/0x150 [ 1.791788] bus_for_each_drv+0x88/0xe8 [ 1.791792] __device_attach+0x9c/0x1a0 [ 1.791796] device_initial_probe+0x14/0x20 [ 1.791801] bus_probe_device+0xa0/0xa4 [ 1.791805] deferred_probe_work_func+0x88/0xd0 [ 1.791809] process_one_work+0x1e8/0x448 [ 1.791813] worker_thread+0x1ac/0x340 [ 1.791816] kthread+0x138/0x220 [ 1.791821] ret_from_fork+0x10/0x20 Fixes: c29345f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Tested-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces: - EVK-M101 current sensors - EVK-M101 I2C - EVK-M101 UART - EVK-M101 port D Only the third USB interface is a UART. This change lets ftdi_sio probe the VID/PID and registers only interface #3 as a TTY, leaving the rest available for other drivers. [1] usb 5-1.3: new high-speed USB device number 11 using xhci_hcd usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00 usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.3: Product: EVK-M101 usb 5-1.3: Manufacturer: u-blox AG Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com> Link: https://lore.kernel.org/20250926060235.3442748-1-cryosay@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>

We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Fixes: 6cf3c97 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/92d75e21d95d163a41b5cea67a15cd33f547cba6.1764695650.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== selftests: forwarding: vxlan_bridge_1q_mc_ul: Fix flakiness The net/forwarding/vxlan_bridge_1q_mc_ul selftest runs an overlay traffic, forwarded over a multicast-routed VXLAN underlay. In order to determine whether packets reach their intended destination, it uses a TC match. For convenience, it uses a flower match, which however does not allow matching on the encapsulated packet. So various service traffic ends up being indistinguishable from the test packets, and ends up confusing the test. To alleviate the problem, the test uses sleep to allow the necessary service traffic to run and clear the channel, before running the test traffic. This worked for a while, but lately we have nevertheless seen flakiness of the test in the CI. In this patchset, first generalize tc_rule_stats_get() to support u32 in patch #1, then in patch #2 convert the test to use u32 to allow parsing deeper into the packet, and in #3 drop the now-unnecessary sleep. ==================== Link: https://patch.msgid.link/cover.1765289566.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a loop scenario of ethx:egress->ethx:egress Example setup to reproduce: tc qdisc add dev ethx root handle 1: drr tc filter add dev ethx parent 1: protocol ip prio 1 matchall \ action mirred egress redirect dev ethx Now ping out of ethx and you get a deadlock: [ 116.892898][ T307] ============================================ [ 116.893182][ T307] WARNING: possible recursive locking detected [ 116.893418][ T307] 6.18.0-rc6-01205-ge05021a829b8-dirty torvalds#204 Not tainted [ 116.893682][ T307] -------------------------------------------- [ 116.893926][ T307] ping/307 is trying to acquire lock: [ 116.894133][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.894517][ T307] [ 116.894517][ T307] but task is already holding lock: [ 116.894836][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.895252][ T307] [ 116.895252][ T307] other info that might help us debug this: [ 116.895608][ T307] Possible unsafe locking scenario: [ 116.895608][ T307] [ 116.895901][ T307] CPU0 [ 116.896057][ T307] ---- [ 116.896200][ T307] lock(&sch->root_lock_key); [ 116.896392][ T307] lock(&sch->root_lock_key); [ 116.896605][ T307] [ 116.896605][ T307] *** DEADLOCK *** [ 116.896605][ T307] [ 116.896864][ T307] May be due to missing lock nesting notation [ 116.896864][ T307] [ 116.897123][ T307] 6 locks held by ping/307: [ 116.897302][ T307] #0: ffff88800b4b0250 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xb20/0x2cf0 [ 116.897808][ T307] #1: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_output+0xa9/0x600 [ 116.898138][ T307] #2: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2c6/0x1ee0 [ 116.898459][ T307] #3: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.898782][ T307] #4: ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.899132][ T307] #5: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.899442][ T307] [ 116.899442][ T307] stack backtrace: [ 116.899667][ T307] CPU: 2 UID: 0 PID: 307 Comm: ping Not tainted 6.18.0-rc6-01205-ge05021a829b8-dirty torvalds#204 PREEMPT(voluntary) [ 116.899672][ T307] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 116.899675][ T307] Call Trace: [ 116.899678][ T307] <TASK> [ 116.899680][ T307] dump_stack_lvl+0x6f/0xb0 [ 116.899688][ T307] print_deadlock_bug.cold+0xc0/0xdc [ 116.899695][ T307] __lock_acquire+0x11f7/0x1be0 [ 116.899704][ T307] lock_acquire+0x162/0x300 [ 116.899707][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899713][ T307] ? srso_alias_return_thunk+0x5/0xfbef5 [ 116.899717][ T307] ? stack_trace_save+0x93/0xd0 [ 116.899723][ T307] _raw_spin_lock+0x30/0x40 [ 116.899728][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899731][ T307] __dev_queue_xmit+0x2210/0x3b50 Fixes: 178ca30 ("Revert "net/sched: Fix mirred deadlock on device recursion"") Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20251210162255.1057663-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was initially created with a guest_memfd binding, as KVM doesn't support toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag. Failure to reject the new memslot results in a use-after-free due to KVM not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY change is easy enough, and can/will be done as a hardening measure (in anticipation of KVM supporting dirty logging on guest_memfd at some point), but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 </TASK> Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reported-by: Alexander Potapenko <glider@google.com> Fixes: a7800aa ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251202020334.1171351-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

… to macb_open() In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e torvalds#39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Cc: stable@vger.kernel.org Suggested-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://patch.msgid.link/20251222015624.1994551-1-xiaolei.wang@windriver.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

asj and others added 29 commits September 29, 2015 16:29

Btrfs: rename btrfs_sysfs_add_one to btrfs_sysfs_add_mounted

96f3136

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: rename btrfs_sysfs_remove_one to btrfs_sysfs_remove_mounted

6618a59

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: rename btrfs_kobj_add_device to btrfs_sysfs_add_device_link

e3bd697

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: rename btrfs_kobj_rm_device to btrfs_sysfs_rm_device_link

3257604

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: rename super_kobj to fsid_kobj

c1b7e47

Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: SB read failure should return EIO for __bread failure

92fc03f

This will return EIO when __bread() fails to read SB, instead of EINVAL. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: add helper for closing one device

f190aa4

Signed-off-by: Anand Jain <anand.jain@oracle.com> [reworded subject and changelog] Signed-off-by: David Sterba <dsterba@suse.com>

Btrfs: pass the error code to the btrfs_std_error and log ret

6247790

This patch will log return value of add/del_qgroup_relation() and pass the err code of btrfs_run_qgroups to the btrfs_std_error(). Signed-off-by: Anand Jain <anand.jain@oracle.com>

Btrfs: device path change must be logged

adef2e2

From the issue diagnosable point of view, log if the device path is changed. Signed-off-by: Anand Jain <anand.jain@oracle.com>

Btrfs: add missing brelse when superblock checksum fails

f2c354c

Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by: Anand Jain <anand.jain@oracle.com>

Btrfs: clean up and optimize __check_raid_min_device()

e17012a

__check_raid_min_device() which was pealed from btrfs_rm_device() maintianed its original code to show the block move. This patch cleans up __check_raid_min_device(). Signed-off-by: Anand Jain <anand.jain@oracle.com>

Btrfs: make use of btrfs_find_device_by_user_input()

a871c3d

btrfs_rm_device() has a section of the code which can be replaced btrfs_find_device_by_user_input() Signed-off-by: Anand Jain <anand.jain@oracle.com>

Btrfs: make use of btrfs_scratch_superblocks() in btrfs_rm_device()

74b351a

With the previous patches now the btrfs_scratch_superblocks() is ready to be used in btrfs_rm_device() so use it. Signed-off-by: Anand Jain <anand.jain@oracle.com>

asj closed this Oct 8, 2015

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Btrfs device related enhancements #3

Btrfs device related enhancements #3

Uh oh!

asj commented Oct 7, 2015

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Btrfs device related enhancements #3

Btrfs device related enhancements #3

Uh oh!

Conversation

asj commented Oct 7, 2015

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant