lime-report from LibreMesh on OpenWrt 24.10 #1197
Description
I got some lime-reports to compare between LibreMesh on OpenWrt 24.10 and on OpenWrt 23.05. In the first case, I used the latest LibreMesh code (and including also the code from #1139 and #1164)
While for the second I still have to manage to compile the images, will add the reports soonish.
The employed routers are the same employed in #1192: YouHua WR1200JS (DSA), TP-Link WDR3600 (swconfig), TP-Link WR841N v13 (single band, swconfig), PlasmaCloud PA1200 (DSA, without changing the default ath10k driver selection which is ath10k-ct).
Overall, the issues I observed are:
- Default anygw route working intermittently via cable #1192 so that the gateway via cable works intermittently.
- TP-Link WR841N v13 (64 MB RAM) has a high load average and does some boot looping. But I understand this is normal as 64 MB is too much for the default packages set and OpenWrt 24.10. Deselecting lime-app and pirania and avoiding wpad-mesh-* should help.
- libstdcpp dependency of shared-state-async takes 2 MB #1191 shared-state-async dependency libstdcpp is too large to be installed on TP-Link WDR3600
- Observations when testing on PlasmaCloud PA1200 #1151 but I did not check again everything
The cabled network topology is the following:
TP-Link WR841N v13
|
laptop--YouHua WR1200JS--TP-Link WDR3600--PlasmaCloud PA1200--internet
As the routing protocols on the cable are active by default only on swconfig routers, via cable I would expect only the two TP-Link routers to see each other.
Here goes the output of lime-report on each router when using a firmware compiled on OpenWrt 24.10:
- TP-Link WR841N v13 TP-Link_WR841N_v13-LibreMesh_master-OpenWrt_24.10-report.txt
- YouHua WR1200JS YouHua_WR1200JS-LibreMesh_master-OpenWrt_24.10-report.txt
- TP-Link WDR3600 TP-Link_WDR3600-LibreMesh_master-OpenWrt_24.10-report.txt
- PlasmaCloud PA1200 PlasmaCloud_PA1200-LibreMesh_master-OpenWrt_24.10-report.txt
I tried to compile the same on OpenWrt 23.05 but got a ERROR: tools/squashfs3-lzma failed to build., so I will post here those lime-reports as soon as I manage to compile it on another laptop.