driver/Keysight N51x1 RF source

qcodes/instrument_drivers/Keysight/N51x1.py

@@ -0,0 +1,56 @@
+# -*- coding: utf-8 -*-
+from qcodes import VisaInstrument
+from qcodes.utils.validators import Numbers
+
+
+class N51x1(VisaInstrument):
+    """
+    This is the qcodes driver for Keysight/Agilent scalar RF sources.
+    It has been tested with N5171B, N5181A, N5171B
+    """
+
+    def __init__(self, name, address, **kwargs):
+        super().__init__(name, address, terminator='\n', **kwargs)
+
+        self.add_parameter('power',
+                           label='Power',
+                           get_cmd='SOUR:POW?',
+                           get_parser=float,
+                           set_cmd='SOUR:POW {:.2f}',
+                           unit='dBm',
+                           vals=Numbers(min_value=-144,max_value=19))
+
+        # Query the instrument to see what frequency range was purchased
+        freq_dict = {'501':1e9, '503':3e9, '505':6e9}
+        max_freq = freq_dict[self.ask('*OPT?')]
+        self.add_parameter('frequency',
+                           label='Frequency',
+                           get_cmd='SOUR:FREQ?',
+                           get_parser=float,
+                           set_cmd='SOUR:FREQ {:.2f}',
+                           unit='Hz',
+                           vals=Numbers(min_value=9e3,max_value=max_freq))   
+
+        self.add_parameter('phase_offset',
+                           label='Phase Offset',
+                           get_cmd='SOUR:PHAS?',
+                           get_parser=float,
+                           set_cmd='SOUR:PHAS {:.2f}',
+                           unit='rad'
+                           )
+
+        self.add_parameter('rf_output',
+                           get_cmd='OUTP:STAT?',
+                           set_cmd='OUTP:STAT ' + '{:s}',
+                           val_mapping={'on': 1, 'off': 0})
+
+        self.connect_message()
+
+
+    def get_idn(self):
+        IDN = self.ask_raw('*IDN?')
+        vendor, model, serial, firmware = map(str.strip, IDN.split(','))
+        IDN = {'vendor': vendor, 'model': model,
+               'serial': serial, 'firmware': firmware}
+        return IDN
+