When using an Eaton 5E 650i UPS with the proprietary Eaton UPS Companion, there is an additional value named "Output load" which seems like useful information to have via nut. Is this value accessible via nut?
# upsc ups
battery.charge: 100
battery.runtime: 1590
battery.type: PbAc
device.mfr: EATON
device.model: 5E 650i
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: MGE HID 1.39
driver.version.internal: 0.41
input.voltage: 229.0
outlet.1.status: on
outlet.desc: Main Outlet
outlet.id: 1
outlet.switchable: no
output.frequency: 50.0
output.frequency.nominal: 50
output.voltage: 226.0
output.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: 02.06.0017
ups.load: 21
ups.mfr: EATON
ups.model: 5E 650i
ups.power.nominal: 650
ups.productid: ffff
ups.start.battery: yes
ups.status: OL
ups.timer.shutdown: -1
ups.vendorid: 0463
When using an Eaton 5E 650i UPS with the proprietary Eaton UPS Companion, there is an additional value named "Output load" which seems like useful information to have via
nut. Is this value accessible vianut?