[HCL] Kebo UPS-1000D working with blazer_usb

[mikegleasonjr]

ups.conf:

[Kebo]
        driver = blazer_usb
        port = auto
        desc = "Kebo UPS-1000D"
        vendorid = 0001
        productid = 0000
        subdriver = krauler
        langid_fix = 0x4095

$ upsc Kebo@localhost
battery.charge: 100
battery.voltage: 27.30
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr: 
device.model: UPS-1000VA
device.type: ups
driver.name: blazer_usb
driver.parameter.langid_fix: 0x4095
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0000
driver.parameter.subdriver: krauler
driver.parameter.synchronous: no
driver.parameter.vendorid: 0001
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 4.3
input.frequency: 50.6
input.frequency.nominal: 50
input.voltage: 228.0
input.voltage.fault: 165.0
input.voltage.nominal: 230
output.voltage: 229.0
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: VER 1.5
ups.load: 0
ups.mfr: 
ups.model: UPS-1000VA
ups.productid: 0000
ups.status: OL
ups.temperature: 40.8
ups.type: offline / line interactive
ups.vendorid: 0001

[dpantaz]

Hello. Just wanted to report that this exact configuration worked with a Tescom LEO Plus LCD 1500A UPS which is popular in Greece. Thanks!