OCC Reset command just hangs on OpenPower habanero system and occ's are entered in Disabled state. #709
Description
Install a pnor image which is built from op-build master-next branch and try to do a OCC Reset on a OpenPower habanero system and command just hangs and occ's are entered into Disabled state on first attempt itself.
service opal-prd status
- opal-prd.service - OPAL PRD daemon
Loaded: loaded (/lib/systemd/system/opal-prd.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2016-10-27 10:11:39 EDT; 1min 0s ago
Docs: man:opal-prd(8)
Main PID: 4325 (opal-prd)
Tasks: 1 (limit: 11059)
CGroup: /system.slice/opal-prd.service
`-4325 /usr/sbin/opal-prd --pnor /dev/mtd0
ipmitool fru print 43
Product Name : OpenPOWER Firmware
Product Version : open-power-habanero-e60dd7a
Product Extra : buildroot-211bd05
Product Extra : skiboot-5.3.7
Product Extra : hostboot-5a94e29
Product Extra : linux-4.4.24-openpower1-bf3db29
Product Extra : petitboot-v1.3.1-828e2bd
Product Extra : habanero-xml-5565b8f-3d88639
Product Extra : occ-bb092e9
Product Extra : hostboot-binaries-56532f5
Product Extra : capp-uco
ipmitool sdr elist | grep -i occ
OCC Active | 08h | ok | 210.0 | Device Enabled
opal-prd occ reset
On another terminal just check the occ's status again.
ipmitool sdr elist | grep -i occ
OCC Active | 08h | ok | 210.0 | Device Disabled
OCC's are entered into disabled state.
The above all tested on a fresh reboot it self.
opal-prd --version
opal-prd opal-prd-5.3.3
Tried same issue with upstream opal-prd from skiboot
./opal-prd --version
opal-prd opal-prd-5.4.0-rc2
~/skiboot/external/opal-prd# ./opal-prd occ reset
ipmitool sdr elist | grep -i occ
OCC Active | 08h | ok | 210.0 | Device Disabled
occ reset command just hangs and occ's are in disabled state.