Allow for different serial devices for uploading and for the serial console

[probonopd]

It would be a good idea to be able to set separate serial devices for uploading and for the serial console in the Arduino IDE. In my case, I need /dev/ttyACM0 for flashing and /dev/ttyACM1 for the serial monitor. I am using a Black Magic Probe as the programmer.

[dlabun]

This is totally outside of our control, you should make this suggestion directly with Arduino as it's a good one.

[probonopd]

Opened a ticket in the Arduino issue tracker; if you are in support of this idea then maybe you want to comment there, too.