[BUG] NO SOUND for GeminiLake with ES8336

[MisteryX]

NO SOUND, but i can listen the flutter on sound card initialization

Environment
* Kernel: 5.16.0-rc5/5.15.7 (with ASoC-Intel-machine-driver-updates and 3107 patches included)
* SOF: c40c7bf (sof-bin tag v1.9.3)
* Platform: x86-amd64

$ lspci -nn | grep audio
00:0e.0 Multimedia audio controller [0401]: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio [8086:3198] (rev 06)

$ sudo dmesg | grep audio
[    5.528121] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[    5.534437] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[    5.549016] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.589478] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[    5.653265] sof-audio-pci-intel-apl 0000:00:0e.0: hda codecs found, mask 4
[    5.656918] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:9:3-a9780
[    5.656925] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:20:0 Kernel ABI 3:18:0
[    5.656928] sof-audio-pci-intel-apl 0000:00:0e.0: warn: FW ABI is more recent than kernel
[    5.656937] sof-audio-pci-intel-apl 0000:00:0e.0: unknown sof_ext_man header type 3 size 0x30
[    5.696304] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware info: version 1:9:3-a9780
[    5.696312] sof-audio-pci-intel-apl 0000:00:0e.0: Firmware: ABI 3:20:0 Kernel ABI 3:18:0
[    5.696316] sof-audio-pci-intel-apl 0000:00:0e.0: warn: FW ABI is more recent than kernel
[    5.721934] sof-audio-pci-intel-apl 0000:00:0e.0: Topology: ABI 3:20:0 Kernel ABI 3:18:0
[    5.721939] sof-audio-pci-intel-apl 0000:00:0e.0: warn: topology ABI is more recent than kernel

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofessx8336 [sof-essx8336], device 0: ES8336 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofessx8336 [sof-essx8336], device 5: HDMI 1 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofessx8336 [sof-essx8336], device 6: HDMI 2 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofessx8336 [sof-essx8336], device 7: HDMI 3 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

[plbossart]

That's a GLK device, which should be handled already.
soc/sof/intel/pci-apl.c: { PCI_DEVICE(0x8086, 0x3198), /* GeminiLake */

can you try using

speaker-test -Dhw:0:0 -c2 -r48000 (you can use -t sine as well)
and try to set the volume with alsamixer to set "DAC" to 100

also try with headphones to see if you see any difference.

[MisteryX]

DAC have been already at 100%, still no sound

$ speaker-test -Dhw:0:0 -c2 -r48000

speaker-test 1.2.5.1

Playback device is hw:0:0
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib confmisc.c:165:(snd_config_get_card) Cannot get card index for 0:0
Playback open error: -19,No such device

[MisteryX]

Headphones have already tested - no sound, only flutter.

[plbossart]

speaker-test -Dhw:0,0 -c2 -r48000 (comma, not . as show above).

This may be a case of the wrong I2S being used. we assumed it was SSP2 but it could very well be wrong. You could try with the recommendations made for CometLake devices using the same codec device
#3248

Trial and error it is until we figure out a way to detect what the hardware is (#3337)

[MisteryX]

Tested
options snd-soc-sof-es8336 quirk=0x30 (with SSP0 topology)
options snd-soc-sof-es8336 quirk=0x31 (with SSP1 topology)
options snd-soc-sof-es8336 quirk=0x32 (with SSP2 topology)
And only SSP2 topology forces sound device creation, but unfortunately no sound output still

[plbossart]

can you install acpica-tools and attach the NHLT information (dump.bin.gz)

sudo acpidump > dump.bin
gzip dump.bin

[MisteryX]

yep
dump.bin.gz

[plbossart]

this is good information @MisteryX, it looks like this device uses SSP0 instead of SSP2 for other GLK devices. There is no PDM DMIC listed.

nhlt.dsl.txt

so what you'd need to do is use this

options snd-soc-sof-es8336 quirk=0x00
or
options snd-soc-sof-es8336 quirk=0x10

explanations: SSP0, no DMIC, GLK or TGL quirks for the speaker GPIO.

Please try this topology file:
sof-glk-es8336-ssp0.tplg.gz copied as /lib/firmware/inte/sof-tplg/sof-glk-es8336.tplg

Also add this file
sof-dyndbg.conf.txt as /etc/modprobe.d/sof-dyndbg.conf

And attach full results of 'dmesg' and 'alsa-info'.

This is painful but it shouldn't be too hard to figure out.

[MisteryX]

Done.
http://alsa-project.org/db/?f=fdc5c3d7123d8bbf731b38726122bb7c6bc1a44e