ASoC: SOF: pcm: clear hw_params_upon_resume flag correctly #936
Conversation
libinyang
requested review from
juimonen,
keyonjie,
lyakh and
ranj063
as code owners
|
This patch is to fix: #934 |
lyakh
left a comment
lyakh
left a comment
There was a problem hiding this comment.
Also fixes a similarly looking issue on Up^2
plbossart
left a comment
plbossart
left a comment
There was a problem hiding this comment.
Additional context/clarifications needed, thanks
I did think to remove it when I made this patch. I could not thought out any situation that we should still clear the flag in pcm open. However, pcm open() seems to be a good place to initialize the flag. So I reserved this initialization. And I'm not sure whether it is really safe to remove the flag from open. If @ranj063 and @plbossart is OK to remove the flag clear from open, I will refine the patch to remove it. |
sof_pcm_hw_params() can only be called once to setup the FW hw_params. So after calling sof_pcm_hw_params(), hw_params_upon_resume flag must be cleared to avoid multiple invoking sof_pcm_hw_params() by prepare. For example, after resume, there is an xrun happened, prepare() will be called. As the hw_params_upon_resume flag is not cleared, sof_pcm_hw_params() will be called and this will cause IPC timeout. This patch fixes such issues. Signed-off-by: Libin Yang <libin.yang@intel.com>
libinyang
force-pushed
the
clear_upon_resume_in_hw_params
branch
from
9203176 to
306a743
Compare
|
Patch is updated. |
@libinyang in the future, please leave such comment in the first post, otherwise corresponding issue won't be closed if the PR is merged. https://help.github.com/en/articles/closing-issues-using-keywords |
OK, I will do it. |
plbossart
left a comment
plbossart
left a comment
There was a problem hiding this comment.
The commit message is still convoluted but what can I say.
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when passing hugepage reservation on command line: Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty thesofproject#936 Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS NIP: c1020240 LR: c10201d0 CTR: 00000000 REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty) MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000 GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000 GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149 GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000 GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000 NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284 LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 Call Trace: [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable) [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8 [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280 [c13fdf30] [c0078904] parse_args+0x200/0x4c4 [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0 [c13fdff0] [c0000434] set_ivor+0x12c/0x168 Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb ---[ end trace 0000000000000000 ]--- This is due to virt_addr_valid() using high_memory before it is set. high_memory is set in mem_init() using max_low_pfn, but max_low_pfn is available long before, it is set in mem_topology_setup(). So just like commit daa9ada ("powerpc/mm: Fix boot crash with FLATMEM") moved the setting of max_mapnr immediately after the call to mem_topology_setup(), the same can be done for high_memory. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
5 participants
This patch is to fix: #934
sof_pcm_hw_params() can only be called once to setup the FW hw_params.
So after calling sof_pcm_hw_params(), hw_params_upon_resume flag must
be cleared to avoid multiple invoking sof_pcm_hw_params() by prepare.
Signed-off-by: Libin Yang libin.yang@intel.com