tplgs loading failed on BYT

[zhuqingliang]

commit : f756455
On APL , tplg is 'test-ssp5-mclk-0-I2S-volume-s16le-s16le-48k-24576k-nocodec.tplg'
the log is
[ 5.451061] sof-audio sof-audio: error: can't connect DAI SSP5.OUT stream NoCodec-5
[ 5.451627] sof-audio sof-audio: error: can't connect DAI SSP5.IN stream NoCodec-5
[ 5.456527] sof-audio sof-audio: error: tplg component load failed -22
[ 5.456537] sof-audio sof-audio: error: failed to load DSP topology -22

On CNL, tplg is 'test-ssp0-mclk-0-I2S-volume-s16le-s16le-48k-24000k-nocodec.tplg
the log is
[ 3.448094] sof-audio sof-audio: error: can't connect DAI SSP0.OUT stream NoCodec-0
[ 3.449932] sof-audio sof-audio: error: can't connect DAI SSP0.IN stream NoCodec-0
[ 3.452223] sof-audio sof-audio: error: tplg component load failed -22
[ 3.452265] sof-audio sof-audio: error: failed to load DSP topology -22
[ 3.484232] sof-nocodec: probe of sof-nocodec failed with error -22

On BYT, tplg is 'test-ssp2-mclk-0-I2S-volume-s16le-s16le-48k-19200k-codec.tplg'
the log is
[ 9.739730] sof-audio sof-audio: ASoC: physical link SSP2-Codec (id 2) not exist
[ 9.739735] sof-audio sof-audio: error: tplg component load failed -22
[ 9.739746] sof-audio sof-audio: error: failed to load DSP topology -22
[ 9.739749] sof-audio sof-audio: ASoC: failed to probe component -22
[ 9.739799] bytcr_rt5651 bytcr_rt5651: ASoC: failed to instantiate card -22
[ 9.752215] bytcr_rt5651 bytcr_rt5651: Topology forgot to remove link Passthrough?
[ 9.768074] bytcr_rt5651 bytcr_rt5651: devm_snd_soc_register_card failed -22

[plbossart]

This is a known issue due to dependencies on the kernel PR2 which hasn't been approved yet

[xiulipan]

Test with the kernel PR2.
With BYT RT5651, there will be a mismatch bug when try to find physical link SSP2-Codec (id 2)
The machine have a dai with SSP2-Codec (id 0)
The new topology will make the id 0 => 2.
I check the topology patch set and find
patch here 0 => TEST_DAI_PORT
cause the regression on codec platform.

[keyonjie]

we need to set the 3rd params of DAI_CONFIG() to be the corresponding .id defined in machine driver Be dai_links, so we may need add a param for codec test topology generation.

[zhuqingliang]

commit 629d2a6
nocodec tplg load successfully on APL and CNL

[xiulipan]

should be fixed with #19

[lgirdwood]

@zhuqingliang please close this if all is working

[zhuqingliang]

"test-ssp2-mclk-0-I2S-volume-s16le-s16le-48k-19200k-codec.tplg " load success on commit

ff8eb10