Bump github.com/docker/docker from 27.5.0+incompatible to 28.0.1+incompatible in the gomod-updates group

[dependabot]

Bumps the gomod-updates group with 1 update: github.com/docker/docker.

Updates github.com/docker/docker from 27.5.0+incompatible to 28.0.1+incompatible

Release notes

Sourced from github.com/docker/docker's releases.

v28.0.1

28.0.1

For a full list of pull requests and changes in this release, refer to the relevant GitHub milestones:

• docker/cli, 28.0.1 milestone
• moby/moby, 28.0.1 milestone

Networking

• Remove dependency on kernel modules ip_set, ip_set_hash_net and netfilter_xt_set.
  • The dependency was introduced in release 28.0.0 but proved too disruptive. The iptables rules using these modules have been replaced. moby/moby#49530
• Allow daemon startup on a host with IPv6 disabled without requiring --ip6tables=false. moby/moby#49525
• Fix a bug that was causing containers with --restart=always and a published port already in use to restart in a tight loop. moby/moby#49507
• Fix an issue with Swarm ingress, caused by incorrect ordering of iptables rules. moby/moby#49538
• Fix creation of a swarm-scoped network from a --config-only network. moby/moby#49521
• Fix docker network inspect reporting an IPv6 gateway with CIDR suffix for a newly created network with no specific IPAM config, until a daemon restart. moby/moby#49520
• Improve the error reported when kernel modules ip_set, ip_set_hash_net and netilter_xt_set are not available. moby/moby#49524
• Move most of Docker's iptables rules out of the filter-FORWARD chain, so that other applications are free to append rules that must follow Docker's rules. moby/moby#49518
• Update --help output and man page lo state which options only apply to the default bridge network. moby/moby#49522

Bug fixes and enhancements

• Fix docker context create always returning an error when using the "skip-tls-verify" option. docker/cli#5850
• Fix shell completion suggesting IDs instead of names for services and nodes. docker/cli#5848
• Fix unintentionally printing exit status to standard error output when docker exec/run returns a non-zero status. docker/cli#5854
• Fix regression protocol "tcp" is not supported by the RootlessKit port driver "slirp4netns". moby/moby#49514
• containerd image store: Fix docker inspect not being able to show multi-platform images with missing layers for all platforms. moby/moby#49533
• containerd image store: Fix docker images --tree reporting wrong content size. moby/moby#49535
• Fix compilation on i386 moby/moby#49526

Packaging updates

• Update github.com/go-jose/go-jose/v4 to v4.0.5 to address. GHSA-c6gw-w398-hv78 / CVE-2025-27144 docker/cli#5867
• Update Buildx to v0.21.1. docker/docker-ce-packaging#1167
• Update Compose to v2.33.1. docker/docker-ce-packaging#1168

API

• containerd image store: Fix GET /images/json?manifests=1 not filling Manifests for index-only images. moby/moby#49533
• containerd image store: Fix GET /images/json and /images/<name>/json Size.Content field including the size of content that's not available locally. moby/moby#49535

v28.0.0

28.0.0

For a full list of pull requests and changes in this release, refer to the relevant GitHub milestones:

• docker/cli, 28.0.0 milestone

... (truncated)

Commits

• bbd0a17 Merge pull request #49538 from robmry/docker_ingress
• 8ae4858 Merge pull request #49545 from robmry/revert_check-config_ipset
• 1814363 Revert "contrib/check-config: add ipset related flags"
• 558da63 Jump to DOCKER-INGRESS from DOCKER-FORWARD
• f92fdfe Merge pull request #49530 from robmry/disable_ip_set
• 88bc9a3 Merge pull request #49535 from vvoland/c8d-fixcontentsize
• 76417bf Don't use ipset
• c35159e c8d/manifests: Fix Content size including missing content
• 0510499 Merge pull request #49533 from vvoland/c8d-inspectlist-indeximg
• 0274c63 Merge pull request #49518 from robmry/docker_forward_chain
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai generate docstrings to generate docstrings for this PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.