[Another draft] Working generic metadata sample #10

walking-machine · 2021-10-07T12:02:53Z

Managed to read btf_id using a negative offset with bpf_probe_read, improved user space application to simplify testing and printed out available metadata.

I think the future steps would be:

waiting for Alex cpumap changes
implementing other metadata acquisition (such as complete checksum)
reworking the hints structure a little bit (figuring out flags and BTF module ids)

Second approach to inform driver about metadata. Let user decide if metadata should be supported or not. Add this flag to allow user to inform driver that metadata is used. Set flag is sent to driver via exsisting ndo_bpf call in flag field. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

As starting point add vlan id and rss hash if xdp metadata is supported. Add xd_metadata_support field in VSI to allow easy passing this value to ring configuration. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

Function btf_get_type_id is needed to get correct BTF id to fill metadata by driver. BTF id is obtained while loading XDP program and saved in ring structure to be available in irq. Calling btf_get_type_id with null pointer as module will result in searching for BTF id in vmlinux. Signed-off-by: Ederson de Souza <ederson.desouza@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>

Example prints out BTF ID returned by a libbpf helper and received in data_meta. It's assumed, pointer to BTF ID is data - sizeof(u32). Possible improvements: - print out RSS and VLAN ID, use CO-RE functions for this (this way user can avoid defining full hints structure) - improve user application (currently it does not ) Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>

Type needs to be used in the kernel in order to be present in vmlinux BTF. Future Alex's changes to cpumap will ensure this, but for now we just declare a variable of the required type in a random place for testing purposes.

Ensure that xdp program is detached before user program termination. Print out trace_pipe. This allows to run example multiple times without additional commands.

It was tested on an untagged VLAN, so VID seem to be garbage. Hash looks fine, as well as hardcoded values.

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ido Schimmel says: ==================== HW counters for soft devices Petr says: Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as a VLAN. In this patch set, add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question, and add mlxsw offload. Across HW platforms, the counter itself very likely constitutes a limited resource, and the act of counting may have a performance impact. Therefore this patch set makes the HW statistics collection opt-in and togglable from userspace on a per-netdevice basis. Additionally, HW devices may have various limiting conditions under which they can realize the counter. Therefore it is also possible to query whether the requested counter is realized by any driver. In TC parlance, which is to a degree reused in this patch set, two values are recognized: "request" tracks whether the user enabled collecting HW statistics, and "used" tracks whether any HW statistics are actually collected. In the past, this author has expressed the opinion that `a typical user doing "ip -s l sh", including various scripts, wants to see the full picture and not worry what's going on where'. While that would be nice, unfortunately it cannot work: - Packets that trap from the HW datapath to the SW datapath would be double counted. For a given netdevice, some traffic can be purely a SW artifact, and some may flow through the HW object corresponding to the netdevice. But some traffic can also get trapped to the SW datapath after bumping the HW counter. It is not clear how to make sure double-counting does not occur in the SW datapath in that case, while still making sure that possibly divergent SW forwarding path gets bumped as appropriate. So simply adding HW and SW stats may work roughly, most of the time, but there are scenarios where the result is nonsensical. - HW devices will have limitations as to what type of traffic they can count. In case of mlxsw, which is part of this patch set, there is no reasonable way to count all traffic going through a certain netdevice, such as a VLAN netdevice enslaved to a bridge. It is however very simple to count traffic flowing through an L3 object, such as a VLAN netdevice with an IP address. Similarly for physical netdevices, the L3 object at which the counter is installed is the subport carrying untagged traffic. These are not "just counters". It is important that the user understands what is being counted. It would be incorrect to conflate these statistics with another existing statistics suite. To that end, this patch set introduces a statistics suite called "L3 stats". This label should make it easy to understand what is being counted, and to decide whether a given device can or cannot implement this suite for some type of netdevice. At the same time, the code is written to make future extensions easy, should a device pop up that can implement a different flavor of statistics suite (say L2, or an address-family-specific suite). For example, using a work-in-progress iproute2[1], to turn on and then list the counters on a VLAN netdevice: # ip stats set dev swp1.200 l3_stats on # ip stats show dev swp1.200 group offload subgroup l3_stats 56: swp1.200: group offload subgroup l3_stats on used on RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 The patchset progresses as follows: - Patch #1 is a cleanup. - In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are dev-backed. The only attribute defined under the nest is currently IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the driver that supplies the statistics is not the same as the driver that implements the netdevice. Make the code compatible with this in patch #2. - In patch #3, add the possibility to filter inside nests. The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. In this patch, the UAPI is extended to allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular, but the scheme is easily extensible to other nests as well. - In patch #4, propagate extack where we need it. In patch #5, make it possible to propagate errors from drivers to the user. - In patch #6, add the in-kernel APIs for keeping track of the new stats suite, and the notifiers that the core uses to communicate with the drivers. - In patch #7, add UAPI for obtaining the new stats suite. - In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry the message to toggle the newly-added stats suite. In patch #9, add the toggle itself. At this point the core is ready for drivers to add support for the new stats suite. - In patches #10, #11 and #12, apply small tweaks to mlxsw code. - In patch #13, add support for L3 stats, which are realized as RIF counters. - Finally in patch #14, a selftest is added to the net/forwarding directory. Technically this is a HW-specific test, in that without a HW implementing the counters, it just will not pass. But devices that support L3 statistics at all are likely to be able to reuse this selftest, so it seems appropriate to put it in the general forwarding directory. We also have a netdevsim implementation, and a corresponding selftest that verifies specifically some of the core code. We intend to contribute these later. Interested parties can take a look at the raw code at [2]. [1] https://github.com/pmachata/iproute2/commits/soft_counters [2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2 v2: - Patch #3: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Use NLA_POLICY_NESTED to declare what the nest contents should be - Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering attribute. - Patch #6: - s/monotonous/monotonic/ in commit message - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #7: - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #8: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Patch #13: - Use a newly-added struct rtnl_hw_stats64 for stats transfer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Either mount(2) or automount might not have server->origin_fullpath set yet while refresh_cache_worker() is attempting to refresh DFS referrals. Add missing NULL check and locking around it. This fixes bellow crash: [ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10 [ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.284990] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.285625] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.286683] Call Trace: [ 1070.286890] <TASK> [ 1070.287070] refresh_cache_worker+0x895/0xd20 [cifs] [ 1070.287475] ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs] [ 1070.287905] ? __lock_acquire+0xcd1/0x6960 [ 1070.288247] ? is_dynamic_key+0x1a0/0x1a0 [ 1070.288591] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 1070.289012] ? lock_downgrade+0x6f0/0x6f0 [ 1070.289318] process_one_work+0x7bd/0x12d0 [ 1070.289637] ? worker_thread+0x160/0xec0 [ 1070.289970] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1070.290318] ? _raw_spin_lock_irq+0x5e/0x90 [ 1070.290619] worker_thread+0x5ac/0xec0 [ 1070.290891] ? process_one_work+0x12d0/0x12d0 [ 1070.291199] kthread+0x2a5/0x350 [ 1070.291430] ? kthread_complete_and_exit+0x20/0x20 [ 1070.291770] ret_from_fork+0x22/0x30 [ 1070.292050] </TASK> [ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4 [ 1070.292765] ---[ end trace 0000000000000000 ]--- [ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.302645] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.303462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.305004] Kernel panic - not syncing: Fatal exception [ 1070.305711] Kernel Offset: disabled [ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

Ido Schimmel says: ==================== mlxsw: A dedicated notifier block for router code Petr says: Currently all netdevice events are handled in the centralized notifier handler maintained by spectrum.c. Since a number of events are involving router code, spectrum.c needs to dispatch them to spectrum_router.c. The spectrum module therefore needs to know more about the router code than it should have, and there is are several API points through which the two modules communicate. In this patchset, move bulk of the router-related event handling to the router code. Some of the knowledge has to stay: spectrum.c cannot veto events that the router supports, and vice versa. But beyond that, the two can ignore each other's details, which leads to more focused and simpler code. As a side effect, this fixes L3 HW stats support on tunnel netdevices. The patch set progresses as follows: - In patch #1, change spectrum code to not bounce L3 enslavement, which the router code supports. - In patch #2, add a new do-nothing notifier block to the router code. - In patches #3-#6, move router-specific event handling to the router module. In patch #7, clean up a comment. - In patch #8, use the advantage that all router event handling is in the router code and clean up taking router lock. - mlxsw supports L3 HW stats on tunnels as of this patchset. Patches #9 and #10 therefore add a selftest for L3 HW stats support on tunnels. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: L3 HW stats improvements While testing L3 HW stats [1] on top of mlxsw, two issues were found: 1. Stats cannot be enabled for more than 205 netdevs. This was fixed in commit 4b7a632 ("mlxsw: spectrum_cnt: Reorder counter pools"). 2. ARP packets are counted as errors. Patch #1 takes care of that. See the commit message for details. The goal of the majority of the rest of the patches is to add selftests that would have discovered that only about 205 netdevs can have L3 HW stats supported, despite the HW supporting much more. The obvious place to plug this in is the scale test framework. The scale tests are currently testing two things: that some number of instances of a given resource can actually be created; and that when an attempt is made to create more than the supported amount, the failures are noted and handled gracefully. However the ability to allocate the resource does not mean that the resource actually works when passing traffic. For that, make it possible for a given scale to also test traffic. To that end, this patchset adds traffic tests. The goal of these is to run traffic and observe whether a sample of the allocated resource instances actually perform their task. Traffic tests are only run on the positive leg of the scale test (no point trying to pass traffic when the expected outcome is that the resource will not be allocated). They are opt-in, if a given test does not expose it, it is not run. The patchset proceeds as follows: - Patches #2 and #3 add to "devlink resource" support for number of allocated RIFs, and the capacity. This is necessary, because when evaluating how many L3 HW stats instances it should be possible to allocate, the limiting resource on Spectrum-2 and above currently is not the counters themselves, but actually the RIFs. - Patch #6 adds support for invocation of a traffic test, if a given scale tests exposes it. - Patch #7 adds support for skipping a given scale test. Because on Spectrum-2 and above, the limiting factor to L3 HW stats instances is actually the number of RIFs, there is no point in running the failing leg of a scale tests, because it would test exhaustion of RIFs, not of RIF counters. - With patch #8, the scale tests drivers pass the target number to the cleanup function of a scale test. - In patch #9, add a traffic test to the tc_flower selftests. This makes sure that the flow counters installed with the ACLs actually do count as they are supposed to. - In patch #10, add a new scale selftest for RIF counter scale, including a traffic test. - In patch #11, the scale target for the tc_flower selftest is dynamically set instead of being hard coded. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ca0a53dcec9495d1dc5bbc369c810c520d728373 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Unified bridge conversion - part 6/6 This is the sixth and final part of the conversion of mlxsw to the unified bridge model. It transitions the last bits of functionality that were under firmware's responsibility in the legacy model to the driver. The last patches flip the driver to the unified bridge model and clean up code that was used to make the conversion easier to review. Patchset overview: Patch #1 sets the egress VID for known unicast packets. For multicast packets, the egress VID is configured using the MPE table. See commit 8c2da08 ("mlxsw: spectrum_fid: Configure egress VID classification for multicast"). Patch #2 configures the VNI to FID classification that is used during decapsulation. Patch #3 configures ingress router interface (RIF) in FID classification records, so that when a packet reaches the router block, its ingress RIF is known. Care is taken to configure this in all the different flows (e.g., RIF set on a FID, {Port, VID} joins a FID that already has a RIF etc.). Patch #4 configures the egress VID for routed packets. For such packets, the egress VID is not set by the MPE table or by an FDB record at the egress bridge, but instead by a dedicated table that maps {Egress RIF, Egress port} to a VID. Patch #5 removes VID configuration from RIF creation as in the unified bridge model firmware no longer needs it. Patch #6 sets the egress FID to use in RIF configuration so that the device knows using which FID to bridge the packet after routing. Patches #7-#9 add a new 802.1Q family and associated VLAN RIFs. In the unified bridge model, we no longer need to emulate 802.1Q FIDs using 802.1D FIDs as VNI can be associated with both. Patches #10-#11 finally flip the driver to the unified bridge model. Patches #12-#13 clean up code that was used to make the conversion easier to review. v2: * Fix build failure [1] in patch #1. [1] https://lore.kernel.org/netdev/20220630201709.6e66a1bb@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) #1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 #2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 #3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 #4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 #5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 #6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 #7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 #8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 #9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 #10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 #11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 #7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 #8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 #7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 #8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 #9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com

Petr Machata says: ==================== mlxsw: Add 802.1X and MAB offload support This patchset adds 802.1X [1] and MAB [2] offload support in mlxsw. Patches #1-#3 add the required switchdev interfaces. Patches #4-#5 add the required packet traps for 802.1X. Patches #6-#10 are small preparations in mlxsw. Patch #11 adds locked bridge port support in mlxsw. Patches #12-#15 add mlxsw selftests. The patchset was also tested with the generic forwarding selftest ('bridge_locked_port.sh'). [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a21d9a670d81103db7f788de1a4a4a6e4b891a0b [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a35ec8e38cdd1766f29924ca391a01de20163931 ==================== Link: https://lore.kernel.org/r/cover.1667902754.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When running kfence_test, I found some testcases failed like this: # test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346 Expected report_matches(&expect) to be true, but is false not ok 1 - test_out_of_bounds_read The corresponding call-trace is: BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84 Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10): kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc The kfence_test using the first frame of call trace to check whether the testcase is succeed or not. Commit 6a00ef4 ("riscv: eliminate unreliable __builtin_frame_address(1)") skip first frame for all case, which results the kfence_test failed. Indeed, we only need to skip the first frame for case (task==NULL || task==current). With this patch, the call-trace will be: BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7): test_out_of_bounds_read+0x88/0x19e kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc Fixes: 6a00ef4 ("riscv: eliminate unreliable __builtin_frame_address(1)") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Tested-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Daniel Machon says: ==================== net: Add support for PSFP in Sparx5 ================================================================================ Add support for Per-Stream Filtering and Policing (802.1Q-2018, 8.6.5.1). ================================================================================ The VCAP CLM (VCAP IS0 ingress classifier) classifies streams, identified by ISDX (Ingress Service Index, frame metadata), and maps ISDX to streams. Flow meters are also classified by ISDX, and implemented using service policers (Service Dual Leacky Buckets, SDLB). Leacky buckets are linked together in a leak chain of a leak group. Leak groups a preconfigured to serve buckets within a certain rate interval. Stream gates are time-based policers used by PSFP. Frames are dropped based on the gate state (OPEN/ CLOSE), whose state will be altered based on the Gate Control List (GCL) and current PTP time. Apart from time-based policing, stream gates can alter egress queue selection for the frames that pass through the Gate. This is done through Internal Priority Selector (IPS). Stream gates are mapped from stream filters. Support for tc actions gate and police, have been added to the VCAP IS0 set of supported actions. Examples: // tc filter with gate action $ tc filter add dev eth1 ingress chain 1100000 prio 1 handle 1001 protocol \ 802.1q flower skip_sw vlan_id 100 action gate base-time 0 sched-entry open \ 700000 7 8m sched-entry close 300000 action goto chain 1200000 // tc filter with police action $ tc filter add dev eth1 ingress chain 1100000 prio 1 handle 1002 protocol \ 802.1q flower skip_sw vlan_id 100 action police rate 1gbit burst 8096 \ conform-exceed drop action goto chain 1200000 ================================================================================ Patches ================================================================================ Patch #1: Adds new register needed for PSFP. Patch #2: Adds resource pools to control PSFP needed chip resources. Patch #3: Adds support for SDLB's needed for flow-meters. Patch #4: Adds support for service policers. Patch #5: Adds support for PSFP flow-meters, using service policers. Patch #6: Adds a new function to calculate basetime, required by flow-meters. Patch #7: Adds support for PSFP stream gates. Patch #8: Adds support for PSFP stream filters. Patch #9: Adds a function to initialize flow-meters, stream gates and stream filters. Patch #10: Adds the required flower code to configure PSFP using the tc command. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== bridge: Limit number of MDB entries per port, port-vlan The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. Per-port number of entries keeps track of the total number of MDB entries configured on a given port. The per-port-VLAN value then keeps track of the subset of MDB entries configured specifically for the given VLAN, on that port. The number is adjusted as port_groups are created and deleted, and therefore under multicast lock. A maximum value, if non-zero, then places a limit on the number of entries that can be configured in a given context. Attempts to add entries above the maximum are rejected. Rejection reason of netlink-based requests to add MDB entries is communicated through extack. This channel is unavailable for rejections triggered from the control path. To address this lack of visibility, the patchset adds a tracepoint, bridge:br_mdb_full: # perf record -e bridge:br_mdb_full & # [...] # perf script | cut -d: -f4- dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 0 dev v2 af 10 src :: grp ff0e::112/00:00:00:00:00:00 vid 0 dev v2 af 2 src ::ffff:0.0.0.0 grp ::ffff:239.1.1.112/00:00:00:00:00:00 vid 10 dev v2 af 10 src 2001:db8:1::1 grp ff0e::1/00:00:00:00:00:00 vid 10 dev v2 af 2 src ::ffff:192.0.2.1 grp ::ffff:239.1.1.1/00:00:00:00:00:00 vid 10 Another option to consume the tracepoint is e.g. through the bpftrace tool: # bpftrace -e ' tracepoint:bridge:br_mdb_full /args->af != 0/ { printf("dev %s src %s grp %s vid %u\n", str(args->dev), ntop(args->src), ntop(args->grp), args->vid); } tracepoint:bridge:br_mdb_full /args->af == 0/ { printf("dev %s grp %s vid %u\n", str(args->dev), macaddr(args->grpmac), args->vid); }' This tracepoint is triggered for mcast_hash_max exhaustions as well. The following is an example of how the feature is used. A more extensive example is available in patch #8: # bridge vlan set dev v1 vid 1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1 # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1 Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1. The patchset progresses as follows: - In patch #1, set strict_start_type at two bridge-related policies. The reason is we are adding a new attribute to one of these, and want the new attribute to be parsed strictly. The other was adjusted for completeness' sake. - In patches #2 to #5, br_mdb and br_multicast code is adjusted to make the following additions smoother. - In patch #6, add the tracepoint. - In patch #7, the code to maintain number of MDB entries is added as struct net_bridge_mcast_port::mdb_n_entries. The maximum is added, too, as struct net_bridge_mcast_port::mdb_max_entries, however at this point there is no way to set the value yet, and since 0 is treated as "no limit", the functionality doesn't change at this point. Note however, that mcast_hash_max violations already do trigger at this point. - In patch #8, netlink plumbing is added: reading of number of entries, and reading and writing of maximum. The per-port values are passed through RTM_NEWLINK / RTM_GETLINK messages in IFLA_BRPORT_MCAST_N_GROUPS and _MAX_GROUPS, inside IFLA_PROTINFO nest. The per-port-vlan values are passed through RTM_GETVLAN / RTM_NEWVLAN messages in BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, _MAX_GROUPS, inside BRIDGE_VLANDB_ENTRY. The following patches deal with the selftest: - Patches #9 and #10 clean up and move around some selftest code. - Patches #11 to #14 add helpers and generalize the existing IGMP / MLD support to allow generating packets with configurable group addresses and varying source lists for (S,G) memberships. - Patch #15 adds code to generate IGMP leave and MLD done packets. - Patch #16 finally adds the selftest itself. v3: - Patch #7: - Access mdb_max_/_n_entries through READ_/WRITE_ONCE - Move extack setting to br_multicast_port_ngroups_inc_one(). Since we use NL_SET_ERR_MSG_FMT_MOD, the correct context (port / port-vlan) can be passed through an argument. This also removes the need for more READ/WRITE_ONCE's at the extack-setting site. - Patch #8: - Move the br_multicast_port_ctx_vlan_disabled() check out to the _vlan_ helpers callers. Thus these helpers cannot fail, which makes them very similar to the _port_ helpers. Have them take the MC context directly and unify them. v2: - Cover letter: - Add an example of a bpftrace-based probe script - Patch #6: - Report IPv4 as an IPv6-mapped address through the IPv6 buffer as well, to save ring buffer space. - Patch #7: - In br_multicast_port_ngroups_inc_one(), bounce if n>=max, not if n==max - Adjust extack messages to mention ngroups, now that the bounces appear when n>=max, not n==max - In __br_multicast_enable_port_ctx(), do not reset max to 0. Also do not count number of entries by going through _inc, as that would end up incorrectly bouncing the entries. - Patch #8: - Drop locks around accesses in br_multicast_{port,vlan}_ngroups_{get,set_max}(), - Drop bounces due to max<n in br_multicast_{port,vlan}_ngroups_set_max(). - Patch #12: - In the comment at payload_template_calc_checksum(), s/%#02x/%02x/, that's the mausezahn payload format. - Patch #16: - Adjust the tests that check setting max below n and reset of max on VLAN snooping enablement - Make test naming uniform - Enable testing of control path (IGMP/MLD) in mcast_vlan_snooping bridge - Reorganize the code so that test instances (per bridge type and configuration type) always come right after the test, in order of {d,q,qvs}{4,6}{cfg,ctl}. Then groups of selftests are at the end of the file. Similarly adjust invocation order of the tests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Sai Krishna says: ==================== octeontx2: Miscellaneous fixes This patchset includes following fixes. Patch #1 Fix for the race condition while updating APR table Patch #2 Fix end bit position in NPC scan config Patch #3 Fix depth of CAM, MEM table entries Patch #4 Fix in increase the size of DMAC filter flows Patch #5 Fix driver crash resulting from invalid interface type information retrieved from firmware Patch #6 Fix incorrect mask used while installing filters involving fragmented packets Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction, IPV6 filed hash configuration. Patch #8 Fix for NPC hardware parser configuration destination address hash, IPV6 endianness issues. Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware. Patch #10 Fix disabling packet I/O in case of mailbox timeout. Patch #11 Fix detaching LF resources in case of VF probe fail. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Seen in "perf stat --bpf-counters --for-each-cgroup test" running in a container: libbpf: Failed to bump RLIMIT_MEMLOCK (err = -1), you might need to do it explicitly! libbpf: Error in bpf_object__probe_loading():Operation not permitted(1). Couldn't load trivial BPF program. Make sure your kernel supports BPF (CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough value. libbpf: failed to load object 'bperf_cgroup_bpf' libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -1 Failed to load cgroup skeleton #0 0x55f28a650981 in list_empty tools/include/linux/list.h:189 #1 0x55f28a6593b4 in evsel__exit util/evsel.c:1518 #2 0x55f28a6596af in evsel__delete util/evsel.c:1544 #3 0x55f28a89d166 in bperf_cgrp__destroy util/bpf_counter_cgroup.c:283 #4 0x55f28a899e9a in bpf_counter__destroy util/bpf_counter.c:816 #5 0x55f28a659455 in evsel__exit util/evsel.c:1520 #6 0x55f28a6596af in evsel__delete util/evsel.c:1544 #7 0x55f28a640d4d in evlist__purge util/evlist.c:148 #8 0x55f28a640ea6 in evlist__delete util/evlist.c:169 #9 0x55f28a4efbf2 in cmd_stat tools/perf/builtin-stat.c:2598 #10 0x55f28a6050c2 in run_builtin tools/perf/perf.c:330 #11 0x55f28a605633 in handle_internal_command tools/perf/perf.c:384 #12 0x55f28a6059fb in run_argv tools/perf/perf.c:428 #13 0x55f28a6061d3 in main tools/perf/perf.c:562 Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230410205659.3131608-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Jiri Pirko says: ==================== devlink: move port ops into separate structure In devlink, some of the objects have separate ops registered alongside with the object itself. Port however have ops in devlink_ops structure. For drivers what register multiple kinds of ports with different ops this is not convenient. This patchset changes does following changes: 1) Introduces devlink_port_ops with functions that allow devlink port to be registered passing a pointer to driver port ops. (patch #1) 2) Converts drivers to define port_ops and register ports passing the ops pointer. (patches #2, #3, #4, #6, #8, and #9) 3) Moves ops from devlink_ops struct to devlink_port_ops. (patches #5, #7, #10-15) No functional changes. ==================== Link: https://lore.kernel.org/r/20230526102841.2226553-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== mlxsw: Preparations for out-of-order-operations patches The mlxsw driver currently makes the assumption that the user applies configuration in a bottom-up manner. Thus netdevices need to be added to the bridge before IP addresses are configured on that bridge or SVI added on top of it. Enslaving a netdevice to another netdevice that already has uppers is in fact forbidden by mlxsw for this reason. Despite this safety, it is rather easy to get into situations where the offloaded configuration is just plain wrong. As an example, take a front panel port, configure an IP address: it gets a RIF. Now enslave the port to a bridge, and the RIF is gone. Remove the port from the bridge again, but the RIF never comes back. There is a number of similar situations, where changing the configuration there and back utterly breaks the offload. Over the course of the following several patchsets, mlxsw code is going to be adjusted to diminish the space of wrongly offloaded configurations. Ideally the offload state will reflect the actual state, regardless of the sequence of operation used to construct that state. No functional changes are intended in this patchset yet. Rather the patches prepare the codebase for easier introduction of functional changes in later patchsets. - In patch #1, extract a helper to join a RIF of a given port, if there is one. In patch #2, use it in a newly-added helper to join a LAG interface. - In patches #3, #4 and #5, add helpers that abstract away the rif->dev access. This will make it simpler in the future to change the way the deduction is done. In patch #6, do this for deduction from nexthop group info to RIF. - In patch #7, add a helper to destroy a RIF. So far RIF was destroyed simply by kfree'ing it. - In patch #8, add a helper to check if any IP addresses are configured on a netdevice. This helper will be useful later. - In patch #9, add a helper to migrate a RIF. This will be a convenient place to put extensions later on. - Patch #10 move IPIP initialization up to make ipip_ops_arr available earlier. ==================== Link: https://lore.kernel.org/r/cover.1686581444.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The kernel IRQ system needs the irq affinity notifier to be clear before attempting to free the irq, see WARN_ON log below. On a normal driver unload we don't have this issue since we do the complete cleanup of the irq resources. To fix this, put the important resources cleanup in a helper function and use it in both normal driver unload and shutdown flows. [ 4497.498434] ------------[ cut here ]------------ [ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340 [ 4497.499193] Modules linked in: [ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.4.0-rc4+ #10 [ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 [ 4497.500518] Workqueue: events do_poweroff [ 4497.500849] RIP: 0010:free_irq+0x295/0x340 [ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008 [ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282 [ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000 [ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023 [ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260 [ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000 [ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600 [ 4497.504804] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 4497.505302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0 [ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4497.507002] Call Trace: [ 4497.507158] <TASK> [ 4497.507299] ? free_irq+0x295/0x340 [ 4497.507522] ? __warn+0x7c/0x130 [ 4497.507740] ? free_irq+0x295/0x340 [ 4497.507963] ? report_bug+0x171/0x1a0 [ 4497.508197] ? handle_bug+0x3c/0x70 [ 4497.508417] ? exc_invalid_op+0x17/0x70 [ 4497.508662] ? asm_exc_invalid_op+0x1a/0x20 [ 4497.508926] ? free_irq+0x295/0x340 [ 4497.509146] mlx5_irq_pool_free_irqs+0x48/0x90 [ 4497.509421] mlx5_irq_table_free_irqs+0x38/0x50 [ 4497.509714] mlx5_core_eq_free_irqs+0x27/0x40 [ 4497.509984] shutdown+0x7b/0x100 [ 4497.510184] pci_device_shutdown+0x30/0x60 [ 4497.510440] device_shutdown+0x14d/0x240 [ 4497.510698] kernel_power_off+0x30/0x70 [ 4497.510938] process_one_work+0x1e6/0x3e0 [ 4497.511183] worker_thread+0x49/0x3b0 [ 4497.511407] ? __pfx_worker_thread+0x10/0x10 [ 4497.511679] kthread+0xe0/0x110 [ 4497.511879] ? __pfx_kthread+0x10/0x10 [ 4497.512114] ret_from_fork+0x29/0x50 [ 4497.512342] </TASK> Fixes: 9c2d080 ("net/mlx5: Free irqs only on shutdown callback") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Petr Machata says: ==================== selftests: net: Introduce deferred commands Recently, a defer helper was added to Python selftests. The idea is to keep cleanup commands close to their dirtying counterparts, thereby making it more transparent what is cleaning up what, making it harder to miss a cleanup, and make the whole cleanup business exception safe. All these benefits are applicable to bash as well, exception safety can be interpreted in terms of safety vs. a SIGINT. This patchset therefore introduces a framework of several helpers that serve to schedule cleanups in bash selftests. - Patch #1 has more details about the primitives being introduced. Patch #2 adds a fallback cleanup() function to lib.sh, because ideally selftests wouldn't need to introduce a dedicated cleanup function at all. - Patch #3 adds a parameter to stop_traffic(), which makes it possible to start other background processes after the traffic is started without confusing the cleanup. - Patches #4 to #10 convert a number of selftests. The goal was to convert all tests that use start_traffic / stop_traffic to the defer framework. Leftover traffic generators are a particularly painful sort of a missed cleanup. Normal unfinished cleanups can usually be cleaned up simply by rerunning the test and interrupting it early to let the cleanups run again / in full. This does not work with stop_traffic, because it is only issued at the end of the test case that starts the traffic. At the same time, leftover traffic generators influence follow-up test runs, and are hard to notice. The tests were however converted whole-sale, not just their traffic bits. Thus they form a proof of concept of the defer framework. ==================== Link: https://patch.msgid.link/cover.1729157566.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: abfeea4 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Daniel Machon says: ==================== net: sparx5: add support for lan969x switch device == Description: This series is the second of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (merged) --> 2) add support lan969x (same basic features as Sparx5 provides excl. FDMA and VCAP). 3) Add support for lan969x VCAP, FDMA and RGMII == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The main preparation work for lan969x has already been merged [1]. After this series is applied, lan969x will have the same functionality as Sparx5, except for VCAP and FDMA support. QoS features that requires the VCAP (e.g. PSFP, port mirroring) will obviously not work until VCAP support is added later. == Patch breakdown: Patch #1-#4 do some preparation work for lan969x Patch #5 adds new registers required by lan969x Patch #6 adds initial match data for all lan969x targets Patch #7 defines the lan969x register differences Patch #8 adds lan969x constants to match data Patch #9 adds some lan969x ops in bulk Patch #10 adds PTP function to ops Patch #11 adds lan969x_calendar.c for calculating the calendar Patch #12 makes additional use of the is_sparx5() macro to branch out in certain places. Patch #13 documents lan969x in the dt-bindings Patch #14 adds lan969x compatible string to sparx5 driver Patch #15 introduces new concept of per-target features [1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/ v1: https://lore.kernel.org/20241021-sparx5-lan969x-switch-driver-2-v1-0-c8c49ef21e0f@microchip.com ==================== Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-0-a0b5fae88a0f@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== vxlan: Support user-defined reserved bits Currently the VXLAN header validation works by vxlan_rcv() going feature by feature, each feature clearing the bits that it consumes. If anything is left unparsed at the end, the packet is rejected. Unfortunately there are machines out there that send VXLAN packets with reserved bits set, even if they are configured to not use the corresponding features. One such report is here[1], and we have heard similar complaints from our customers as well. This patchset adds an attribute that makes it configurable which bits the user wishes to tolerate and which they consider reserved. This was recommended in [1] as well. A knob like that inevitably allows users to set as reserved bits that are in fact required for the features enabled by the netdevice, such as GPE. This is detected, and such configurations are rejected. In patches #1..#7, the reserved bits validation code is gradually moved away from the unparsed approach described above, to one where a given set of valid bits is precomputed and then the packet is validated against that. In patch #8, this precomputed set is made configurable through a new attribute IFLA_VXLAN_RESERVED_BITS. Patches #9 and #10 massage the testsuite a bit, so that patch #11 can introduce a selftest for the resreved bits feature. The corresponding iproute2 support is available in [2]. [1] https://lore.kernel.org/netdev/db8b9e19-ad75-44d3-bfb2-46590d426ff5@proxmox.com/ [2] https://github.com/pmachata/iproute2/commits/vxlan_reserved_bits/ ==================== Link: https://patch.msgid.link/cover.1733412063.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller reported a warning in __sk_skb_reason_drop(). Commit 61b95c7 ("net: ip: make ip_route_input_rcu() return drop reasons") missed a path where -EINVAL is returned. Then, the cited commit started to trigger the warning with the invalid error. Let's fix it by returning SKB_DROP_REASON_NOT_SPECIFIED. [0]: WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline] WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Modules linked in: CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.12.0-10686-gbb18265c3aba #10 1c308307628619808b5a4a0495c4aab5637b0551 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline] RIP: 0010:sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Code: 5d 41 5c 41 5d 41 5e e9 e7 9e 95 fd e8 e2 9e 95 fd 31 ff 44 89 e6 e8 58 a1 95 fd 45 85 e4 0f 85 a2 00 00 00 e8 ca 9e 95 fd 90 <0f> 0b 90 e8 c1 9e 95 fd 44 89 e6 bf 01 00 00 00 e8 34 a1 95 fd 41 RSP: 0018:ffa0000000007650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000ffff RCX: ffffffff83bc3592 RDX: ff110001002a0000 RSI: ffffffff83bc34d6 RDI: 0000000000000007 RBP: ff11000109ee85f0 R08: 0000000000000001 R09: ffe21c00213dd0da R10: 000000000000ffff R11: 0000000000000000 R12: 00000000ffffffea R13: 0000000000000000 R14: ff11000109ee86d4 R15: ff11000109ee8648 FS: 0000000000000000(0000) GS:ff1100011a000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020177000 CR3: 0000000108a3d006 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> kfree_skb_reason include/linux/skbuff.h:1263 [inline] ip_rcv_finish_core.constprop.0+0x896/0x2320 net/ipv4/ip_input.c:424 ip_list_rcv_finish.constprop.0+0x1b2/0x710 net/ipv4/ip_input.c:610 ip_sublist_rcv net/ipv4/ip_input.c:636 [inline] ip_list_rcv+0x34a/0x460 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x536/0x900 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0x77c/0xdc0 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] gro_normal_list include/net/gro.h:511 [inline] napi_complete_done+0x219/0x8c0 net/core/dev.c:6256 wg_packet_rx_poll+0xbff/0x1e40 drivers/net/wireguard/receive.c:488 __napi_poll.constprop.0+0xb3/0x530 net/core/dev.c:6877 napi_poll net/core/dev.c:6946 [inline] net_rx_action+0x9eb/0xe30 net/core/dev.c:7068 handle_softirqs+0x1ac/0x740 kernel/softirq.c:554 do_softirq kernel/softirq.c:455 [inline] do_softirq+0x48/0x80 kernel/softirq.c:442 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x3ba/0x580 drivers/net/wireguard/receive.c:499 process_one_work+0x940/0x1a70 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x639/0xe30 kernel/workqueue.c:3391 kthread+0x283/0x350 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 82d9983 ("net: ip: make ip_route_input_noref() return drop reasons") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241206020715.80207-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

steal the (clever) algorithm from get_random_u32_below() this fixes a bug where we were passing roundup_pow_of_two() a 64 bit number - we're squaring device latencies now: [ +1.681698] ------------[ cut here ]------------ [ +0.000010] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ +0.000011] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ +0.000011] CPU: 1 UID: 0 PID: 196 Comm: kworker/u32:13 Not tainted 6.14.0-rc6-dave+ #10 [ +0.000012] Hardware name: ASUS System Product Name/PRIME B460I-PLUS, BIOS 1301 07/13/2021 [ +0.000005] Workqueue: events_unbound __bch2_read_endio [bcachefs] [ +0.000354] Call Trace: [ +0.000005] <TASK> [ +0.000007] dump_stack_lvl+0x5d/0x80 [ +0.000018] ubsan_epilogue+0x5/0x30 [ +0.000008] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ +0.000011] bch2_rand_range.cold+0x17/0x20 [bcachefs] [ +0.000231] bch2_bkey_pick_read_device+0x547/0x920 [bcachefs] [ +0.000229] __bch2_read_extent+0x1e4/0x18e0 [bcachefs] [ +0.000241] ? bch2_btree_iter_peek_slot+0x3df/0x800 [bcachefs] [ +0.000180] ? bch2_read_retry_nodecode+0x270/0x330 [bcachefs] [ +0.000230] bch2_read_retry_nodecode+0x270/0x330 [bcachefs] [ +0.000230] bch2_rbio_retry+0x1fa/0x600 [bcachefs] [ +0.000224] ? bch2_printbuf_make_room+0x71/0xb0 [bcachefs] [ +0.000243] ? bch2_read_csum_err+0x4a4/0x610 [bcachefs] [ +0.000278] bch2_read_csum_err+0x4a4/0x610 [bcachefs] [ +0.000227] ? __bch2_read_endio+0x58b/0x870 [bcachefs] [ +0.000220] __bch2_read_endio+0x58b/0x870 [bcachefs] [ +0.000268] ? try_to_wake_up+0x31c/0x7f0 [ +0.000011] ? process_one_work+0x176/0x330 [ +0.000008] process_one_work+0x176/0x330 [ +0.000008] worker_thread+0x252/0x390 [ +0.000008] ? __pfx_worker_thread+0x10/0x10 [ +0.000006] kthread+0xec/0x230 [ +0.000011] ? __pfx_kthread+0x10/0x10 [ +0.000009] ret_from_fork+0x31/0x50 [ +0.000009] ? __pfx_kthread+0x10/0x10 [ +0.000008] ret_from_fork_asm+0x1a/0x30 [ +0.000012] </TASK> [ +0.000046] ---[ end trace ]--- Reported-by: Roland Vet <vet.roland@protonmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 #11 0x5595a7c01c92 in handle_internal_command perf.c:404 #12 0x5595a7c01deb in run_argv perf.c:448 #13 0x5595a7c02134 in main perf.c:556 #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

Ido Schimmel says: ==================== vxlan: Convert FDB table to rhashtable The VXLAN driver currently stores FDB entries in a hash table with a fixed number of buckets (256), resulting in reduced performance as the number of entries grows. This patchset solves the issue by converting the driver to use rhashtable which maintains a more or less constant performance regardless of the number of entries. Measured transmitted packets per second using a single pktgen thread with varying number of entries when the transmitted packet always hits the default entry (worst case): Number of entries | Improvement ------------------|------------ 1k | +1.12% 4k | +9.22% 16k | +55% 64k | +585% 256k | +2460% The first patches are preparations for the conversion in the last patch. Specifically, the series is structured as follows: Patch #1 adds RCU read-side critical sections in the Tx path when accessing FDB entries. Targeting at net-next as I am not aware of any issues due to this omission despite the code being structured that way for a long time. Without it, traces will be generated when converting FDB lookup to rhashtable_lookup(). Patch #2-#5 simplify the creation of the default FDB entry (all-zeroes). Current code assumes that insertion into the hash table cannot fail, which will no longer be true with rhashtable. Patches #6-#10 add FDB entries to a linked list for entry traversal instead of traversing over them using the fixed size hash table which is removed in the last patch. Patches #11-#12 add wrappers for FDB lookup that make it clear when each should be used along with lockdep annotations. Needed as a preparation for rhashtable_lookup() that must be called from an RCU read-side critical section. Patch #13 treats dst cache initialization errors as non-fatal. See more info in the commit message. The current code happens to work because insertion into the fixed size hash table is slow enough for the per-CPU allocator to be able to create new chunks of per-CPU memory. Patch #14 adds an FDB key structure that includes the MAC address and source VNI. To be used as rhashtable key. Patch #15 does the conversion to rhashtable. ==================== Link: https://patch.msgid.link/20250415121143.345227-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says: ==================== ipmr, ip6mr: Allow MC-routing locally-generated MC packets Multicast routing is today handled in the input path. Locally generated MC packets don't hit the IPMR code. Thus if a VXLAN remote address is multicast, the driver needs to set an OIF during route lookup. In practice that means that MC routing configuration needs to be kept in sync with the VXLAN FDB and MDB. Ideally, the VXLAN packets would be routed by the MC routing code instead. To that end, this patchset adds support to route locally generated multicast packets. However, an installation that uses a VXLAN underlay netdevice for which it also has matching MC routes, would get a different routing with this patch. Previously, the MC packets would be delivered directly to the underlay port, whereas now they would be MC-routed. In order to avoid this change in behavior, introduce an IPCB/IP6CB flag. Unless the flag is set, the new MC-routing code is skipped. All this is keyed to a new VXLAN attribute, IFLA_VXLAN_MC_ROUTE. Only when it is set does any of the above engage. In addition to that, and as is the case today with MC forwarding, IPV4_DEVCONF_MC_FORWARDING must be enabled for the netdevice that acts as a source of MC traffic (i.e. the VXLAN PHYS_DEV), so an MC daemon must be attached to the netdevice. When a VXLAN netdevice with a MC remote is brought up, the physical netdevice joins the indicated MC group. This is important for local delivery of MC packets, so it is still necessary to configure a physical netdevice -- the parameter cannot go away. The netdevice would however typically not be a front panel port, but a dummy. An MC daemon would then sit on top of that netdevice as well as any front panel ports that it needs to service, and have routes set up between the two. A way to configure the VXLAN netdevice to take advantage of the new MC routing would be: # ip link add name d up type dummy # ip link add name vx10 up type vxlan id 1000 dstport 4789 \ local 192.0.2.1 group 225.0.0.1 ttl 16 dev d mrcoute # ip link set dev vx10 master br # plus vlans etc. With the following MC routes: (192.0.2.1, 225.0.0.1) iif=d oil=swp1,swp2 # TX route (*, 225.0.0.1) iif=swp1 oil=d,swp2 # RX route (*, 225.0.0.1) iif=swp2 oil=d,swp1 # RX route The RX path has not changed, with the exception of an extra MC hop. Packets are delivered to the front panel port and MC-forwarded to the VXLAN physical port, here "d". Since the port has joined the multicast group, the packets are locally delivered, and end up being processed by the VXLAN netdevice. This patchset is based on earlier patches from Nikolay Aleksandrov and Roopa Prabhu, though it underwent significant changes. Roopa broadly presented the topic on LPC 2019 [0]. Patchset progression: - Patches #1 to #4 add ip_mr_output() - Patches #5 to #10 add ip6_mr_output() - Patch #11 adds the VXLAN bits to enable MR engagement - Patches #12 to #14 prepare selftest libraries - Patch #15 includes a new test suite [0] https://www.youtube.com/watch?v=xlReECfi-uo ==================== Link: https://patch.msgid.link/cover.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The hfs_find_init() method can trigger the crash if tree pointer is NULL: [ 45.746290][ T9787] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KAI [ 45.747287][ T9787] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] [ 45.748716][ T9787] CPU: 2 UID: 0 PID: 9787 Comm: repro Not tainted 6.16.0-rc3 #10 PREEMPT(full) [ 45.750250][ T9787] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 45.751983][ T9787] RIP: 0010:hfs_find_init+0x86/0x230 [ 45.752834][ T9787] Code: c1 ea 03 80 3c 02 00 0f 85 9a 01 00 00 4c 8d 6b 40 48 c7 45 18 00 00 00 00 48 b8 00 00 00 00 00 fc [ 45.755574][ T9787] RSP: 0018:ffffc90015157668 EFLAGS: 00010202 [ 45.756432][ T9787] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff819a4d09 [ 45.757457][ T9787] RDX: 0000000000000008 RSI: ffffffff819acd3a RDI: ffffc900151576e8 [ 45.758282][ T9787] RBP: ffffc900151576d0 R08: 0000000000000005 R09: 0000000000000000 [ 45.758943][ T9787] R10: 0000000080000000 R11: 0000000000000001 R12: 0000000000000004 [ 45.759619][ T9787] R13: 0000000000000040 R14: ffff88802c50814a R15: 0000000000000000 [ 45.760293][ T9787] FS: 00007ffb72734540(0000) GS:ffff8880cec64000(0000) knlGS:0000000000000000 [ 45.761050][ T9787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.761606][ T9787] CR2: 00007f9bd8225000 CR3: 000000010979a000 CR4: 00000000000006f0 [ 45.762286][ T9787] Call Trace: [ 45.762570][ T9787] <TASK> [ 45.762824][ T9787] hfs_ext_read_extent+0x190/0x9d0 [ 45.763269][ T9787] ? submit_bio_noacct_nocheck+0x2dd/0xce0 [ 45.763766][ T9787] ? __pfx_hfs_ext_read_extent+0x10/0x10 [ 45.764250][ T9787] hfs_get_block+0x55f/0x830 [ 45.764646][ T9787] block_read_full_folio+0x36d/0x850 [ 45.765105][ T9787] ? __pfx_hfs_get_block+0x10/0x10 [ 45.765541][ T9787] ? const_folio_flags+0x5b/0x100 [ 45.765972][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.766415][ T9787] filemap_read_folio+0xbe/0x290 [ 45.766840][ T9787] ? __pfx_filemap_read_folio+0x10/0x10 [ 45.767325][ T9787] ? __filemap_get_folio+0x32b/0xbf0 [ 45.767780][ T9787] do_read_cache_folio+0x263/0x5c0 [ 45.768223][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.768666][ T9787] read_cache_page+0x5b/0x160 [ 45.769070][ T9787] hfs_btree_open+0x491/0x1740 [ 45.769481][ T9787] hfs_mdb_get+0x15e2/0x1fb0 [ 45.769877][ T9787] ? __pfx_hfs_mdb_get+0x10/0x10 [ 45.770316][ T9787] ? find_held_lock+0x2b/0x80 [ 45.770731][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771200][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771674][ T9787] hfs_fill_super+0x38e/0x720 [ 45.772092][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.772549][ T9787] ? snprintf+0xbe/0x100 [ 45.772931][ T9787] ? __pfx_snprintf+0x10/0x10 [ 45.773350][ T9787] ? do_raw_spin_lock+0x129/0x2b0 [ 45.773796][ T9787] ? find_held_lock+0x2b/0x80 [ 45.774215][ T9787] ? set_blocksize+0x40a/0x510 [ 45.774636][ T9787] ? sb_set_blocksize+0x176/0x1d0 [ 45.775087][ T9787] ? setup_bdev_super+0x369/0x730 [ 45.775533][ T9787] get_tree_bdev_flags+0x384/0x620 [ 45.775985][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.776453][ T9787] ? __pfx_get_tree_bdev_flags+0x10/0x10 [ 45.776950][ T9787] ? bpf_lsm_capable+0x9/0x10 [ 45.777365][ T9787] ? security_capable+0x80/0x260 [ 45.777803][ T9787] vfs_get_tree+0x8e/0x340 [ 45.778203][ T9787] path_mount+0x13de/0x2010 [ 45.778604][ T9787] ? kmem_cache_free+0x2b0/0x4c0 [ 45.779052][ T9787] ? __pfx_path_mount+0x10/0x10 [ 45.779480][ T9787] ? getname_flags.part.0+0x1c5/0x550 [ 45.779954][ T9787] ? putname+0x154/0x1a0 [ 45.780335][ T9787] __x64_sys_mount+0x27b/0x300 [ 45.780758][ T9787] ? __pfx___x64_sys_mount+0x10/0x10 [ 45.781232][ T9787] do_syscall_64+0xc9/0x480 [ 45.781631][ T9787] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 45.782149][ T9787] RIP: 0033:0x7ffb7265b6ca [ 45.782539][ T9787] Code: 48 8b 0d c9 17 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 [ 45.784212][ T9787] RSP: 002b:00007ffc0c10cfb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 45.784935][ T9787] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffb7265b6ca [ 45.785626][ T9787] RDX: 0000200000000240 RSI: 0000200000000280 RDI: 00007ffc0c10d100 [ 45.786316][ T9787] RBP: 00007ffc0c10d190 R08: 00007ffc0c10d000 R09: 0000000000000000 [ 45.787011][ T9787] R10: 0000000000000048 R11: 0000000000000206 R12: 0000560246733250 [ 45.787697][ T9787] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 45.788393][ T9787] </TASK> [ 45.788665][ T9787] Modules linked in: [ 45.789058][ T9787] ---[ end trace 0000000000000000 ]--- [ 45.789554][ T9787] RIP: 0010:hfs_find_init+0x86/0x230 [ 45.790028][ T9787] Code: c1 ea 03 80 3c 02 00 0f 85 9a 01 00 00 4c 8d 6b 40 48 c7 45 18 00 00 00 00 48 b8 00 00 00 00 00 fc [ 45.792364][ T9787] RSP: 0018:ffffc90015157668 EFLAGS: 00010202 [ 45.793155][ T9787] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff819a4d09 [ 45.794123][ T9787] RDX: 0000000000000008 RSI: ffffffff819acd3a RDI: ffffc900151576e8 [ 45.795105][ T9787] RBP: ffffc900151576d0 R08: 0000000000000005 R09: 0000000000000000 [ 45.796135][ T9787] R10: 0000000080000000 R11: 0000000000000001 R12: 0000000000000004 [ 45.797114][ T9787] R13: 0000000000000040 R14: ffff88802c50814a R15: 0000000000000000 [ 45.798024][ T9787] FS: 00007ffb72734540(0000) GS:ffff8880cec64000(0000) knlGS:0000000000000000 [ 45.799019][ T9787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.799822][ T9787] CR2: 00007f9bd8225000 CR3: 000000010979a000 CR4: 00000000000006f0 [ 45.800747][ T9787] Kernel panic - not syncing: Fatal exception The hfs_fill_super() calls hfs_mdb_get() method that tries to construct Extents Tree and Catalog Tree: HFS_SB(sb)->ext_tree = hfs_btree_open(sb, HFS_EXT_CNID, hfs_ext_keycmp); if (!HFS_SB(sb)->ext_tree) { pr_err("unable to open extent tree\n"); goto out; } HFS_SB(sb)->cat_tree = hfs_btree_open(sb, HFS_CAT_CNID, hfs_cat_keycmp); if (!HFS_SB(sb)->cat_tree) { pr_err("unable to open catalog tree\n"); goto out; } However, hfs_btree_open() calls read_mapping_page() that calls hfs_get_block(). And this method calls hfs_ext_read_extent(): static int hfs_ext_read_extent(struct inode *inode, u16 block) { struct hfs_find_data fd; int res; if (block >= HFS_I(inode)->cached_start && block < HFS_I(inode)->cached_start + HFS_I(inode)->cached_blocks) return 0; res = hfs_find_init(HFS_SB(inode->i_sb)->ext_tree, &fd); if (!res) { res = __hfs_ext_cache_extent(&fd, inode, block); hfs_find_exit(&fd); } return res; } The problem here that hfs_find_init() is trying to use HFS_SB(inode->i_sb)->ext_tree that is not initialized yet. It will be initailized when hfs_btree_open() finishes the execution. The patch adds checking of tree pointer in hfs_find_init() and it reworks the logic of hfs_btree_open() by reading the b-tree's header directly from the volume. The read_mapping_page() is exchanged on filemap_grab_folio() that grab the folio from mapping. Then, sb_bread() extracts the b-tree's header content and copy it into the folio. Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> cc: Yangtao Li <frank.li@vivo.com> cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250710213657.108285-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>

pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () #10 0x00000000100b5f94 in handle_internal_command () #11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Without the change `perf `hangs up on charaster devices. On my system it's enough to run system-wide sampler for a few seconds to get the hangup: $ perf record -a -g --call-graph=dwarf $ perf report # hung `strace` shows that hangup happens on reading on a character device `/dev/dri/renderD128` $ strace -y -f -p 2780484 strace: Process 2780484 attached pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached It's call trace descends into `elfutils`: $ gdb -p 2780484 (gdb) bt #0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0) at ../sysdeps/unix/sysv/linux/pread64.c:25 #1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1 #2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0) at util/dso.h:537 #6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114 #7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242 #8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0, thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127, best_effort=best_effort@entry=false) at util/thread.h:152 #13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939 #14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2920 #15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440, sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true) at util/machine.c:2970 #16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440, sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198 #17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0, evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127 #18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127, arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255 #19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540, evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334 #20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0, file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367 #21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245 #22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324 #23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224, file_path=0x105ffbf0 "perf.data") at util/session.c:1419 #24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0, --Type <RET> for more, q to quit, c to continue without paging-- quit prog=prog@entry=0x7fff9df81220) at util/session.c:2132 #25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220) at util/session.c:2181 #26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226 #27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390 #28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076 torvalds#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827 torvalds#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:351 torvalds#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404 torvalds#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448 torvalds#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556 The hangup happens because nothing in` perf` or `elfutils` checks if a mapped file is easily readable. The change conservatively skips all non-regular files. Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this functionality to dump_stack and switch dump_stack users to use it. Switch TUI to use it. Add stack traces to the child test function which can be useful to diagnose blocked code. Example output: ``` $ perf test -vv PERF_RECORD_ ... 7: PERF_RECORD_* events & perf_sample fields: 7: PERF_RECORD_* events & perf_sample fields : Running (1 active) ^C Signal (2) while running tests. Terminating tests with the same signal Internal test harness failure. Completing any started tests: : 7: PERF_RECORD_* events & perf_sample fields: ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #5 0x7fc12ff02d68 in __sleep sleep.c:55 #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #7 0x55788c620fb0 in run_test_child builtin-test.c:0 #8 0x55788c5bd18d in start_command run-command.c:127 #9 0x55788c621ef3 in __cmd_test builtin-test.c:0 #10 0x55788c6225bf in cmd_test ??:0 #11 0x55788c5afbd0 in run_builtin perf.c:0 #12 0x55788c5afeeb in handle_internal_command perf.c:0 #13 0x55788c52b383 in main ??:0 #14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 #15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #16 0x55788c52b9d1 in _start ??:0 ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45 #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26 #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36 #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0 #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #10 0x7fc12ff02d68 in __sleep sleep.c:55 #11 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #12 0x55788c620fb0 in run_test_child builtin-test.c:0 #13 0x55788c5bd18d in start_command run-command.c:127 #14 0x55788c621ef3 in __cmd_test builtin-test.c:0 #15 0x55788c6225bf in cmd_test ??:0 #16 0x55788c5afbd0 in run_builtin perf.c:0 #17 0x55788c5afeeb in handle_internal_command perf.c:0 #18 0x55788c52b383 in main ??:0 #19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 #20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #21 0x55788c52b9d1 in _start ??:0 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's with branch counters logging (A.K.A LBR event logging [1]) support results in a segfault. $ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter ... Thread 27 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffafff76c0 (LWP 949003)] perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 653 *width = env->cpu_pmu_caps ? env->br_cntr_width : (gdb) bt #0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 #1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345 #2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389 #3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422 #4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850 #5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737 #6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359 #7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845 #8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211 #9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245 #10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324 #11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342 #12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120 #13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448 #14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78 The cause is that perf_env__find_br_cntr_info tries to access a null pointer pmu_caps in the perf_env struct. A similar issue exists for homogeneous core systems which use the cpu_pmu_caps structure. Fix this by populating cpu_pmu_caps and pmu_caps structures with values from sysfs when calling perf top with branch stack sampling enabled. [1], LBR event logging introduced here: https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/ Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list() periodically release j_list_lock after processing a batch of buffers to avoid long hold times on the j_list_lock. However, since both functions contend for j_list_lock, the combined time spent waiting and processing can be significant. jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when need_resched() is true to avoid softlockups during prolonged operations. But jbd2_log_do_checkpoint() only exits its loop when need_resched() is true, relying on potentially sleeping functions like __flush_batch() or wait_on_buffer() to trigger rescheduling. If those functions do not sleep, the kernel may hit a softlockup. watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373] CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10 Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017 Workqueue: writeback wb_workfn (flush-7:2) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : native_queued_spin_lock_slowpath+0x358/0x418 lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] Call trace: native_queued_spin_lock_slowpath+0x358/0x418 jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] __jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2] add_transaction_credits+0x3bc/0x418 [jbd2] start_this_handle+0xf8/0x560 [jbd2] jbd2__journal_start+0x118/0x228 [jbd2] __ext4_journal_start_sb+0x110/0x188 [ext4] ext4_do_writepages+0x3dc/0x740 [ext4] ext4_writepages+0xa4/0x190 [ext4] do_writepages+0x94/0x228 __writeback_single_inode+0x48/0x318 writeback_sb_inodes+0x204/0x590 __writeback_inodes_wb+0x54/0xf8 wb_writeback+0x2cc/0x3d8 wb_do_writeback+0x2e0/0x2f8 wb_workfn+0x80/0x2a8 process_one_work+0x178/0x3e8 worker_thread+0x234/0x3b8 kthread+0xf0/0x108 ret_from_fork+0x10/0x20 So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid softlockup. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://patch.msgid.link/20250812063752.912130-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>

…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ #10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== bridge: Allow keeping local FDB entries only on VLAN 0 The bridge FDB contains one local entry per port per VLAN, for the MAC of the port in question, and likewise for the bridge itself. This allows bridge to locally receive and punt "up" any packets whose destination MAC address matches that of one of the bridge interfaces or of the bridge itself. The number of these local "service" FDB entries grows linearly with number of bridge-global VLAN memberships, but that in turn will tend to grow quadratically with number of ports and per-port VLAN memberships. While that does not cause issues during forwarding lookups, it does make dumps impractically slow. As an example, with 100 interfaces, each on 4K VLANs, a full dump of FDB that just contains these 400K local entries, takes 6.5s. That's _without_ considering iproute2 formatting overhead, this is just how long it takes to walk the FDB (repeatedly), serialize it into netlink messages, and parse the messages back in userspace. This is to illustrate that with growing number of ports and VLANs, the time required to dump this repetitive information blows up. Arguably 4K VLANs per interface is not a very realistic configuration, but then modern switches can instead have several hundred interfaces, and we have fielded requests for >1K VLAN memberships per port among customers. FDB entries are currently all kept on a single linked list, and then dumping uses this linked list to walk all entries and dump them in order. When the message buffer is full, the iteration is cut short, and later restarted. Of course, to restart the iteration, it's first necessary to walk the already-dumped front part of the list before starting dumping again. So one possibility is to organize the FDB entries in different structure more amenable to walk restarts. One option is to walk directly the hash table. The advantage is that no auxiliary structure needs to be introduced. With a rough sketch of this approach, the above scenario gets dumped in not quite 3 s, saving over 50 % of time. However hash table iteration requires maintaining an active cursor that must be collected when the dump is aborted. It looks like that would require changes in the NDO protocol to allow to run this cleanup. Moreover, on hash table resize the iteration is simply restarted. FDB dumps are currently not guaranteed to correspond to any one particular state: entries can be missed, or be duplicated. But with hash table iteration we would get that plus the much less graceful resize behavior, where swaths of FDB are duplicated. Another option is to maintain the FDB entries in a red-black tree. We have a PoC of this approach on hand, and the above scenario is dumped in about 2.5 s. Still not as snappy as we'd like it, but better than the hash table. However the savings come at the expense of a more expensive insertion, and require locking during dumps, which blocks insertion. The upside of these approaches is that they provide benefits whatever the FDB contents. But it does not seem like either of these is workable. However we intend to clean up the RB tree PoC and present it for consideration later on in case the trade-offs are considered acceptable. Yet another option might be to use in-kernel FDB filtering, and to filter the local entries when dumping. Unfortunately, this does not help all that much either, because the linked-list walk still needs to happen. Also, with the obvious filtering interface built around ndm_flags / ndm_state filtering, one can't just exclude pure local entries in one query. One needs to dump all non-local entries first, and then to get permanent entries in another run filter local & added_by_user. I.e. one needs to pay the iteration overhead twice, and then integrate the result in userspace. To get significant savings, one would need a very specific knob like "dump, but skip/only include local entries". But if we are adding a local-specific knobs, maybe let's have an option to just not duplicate them in the first place. All this FDB duplication is there merely to make things snappy during forwarding. But high-radix switches with thousands of VLANs typically do not process much traffic in the SW datapath at all, but rather offload vast majority of it. So we could exchange some of the runtime performance for a neater FDB. To that end, in this patchset, introduce a new bridge option, BR_BOOLOPT_FDB_LOCAL_VLAN_0, which when enabled, has local FDB entries installed only on VLAN 0, instead of duplicating them across all VLANs. Then to maintain the local termination behavior, on FDB miss, the bridge does a second lookup on VLAN 0. Enabling this option changes the bridge behavior in expected ways. Since the entries are only kept on VLAN 0, FDB get, flush and dump will not perceive them on non-0 VLANs. And deleting the VLAN 0 entry affects forwarding on all VLANs. This patchset is loosely based on a privately circulated patch by Nikolay Aleksandrov. The patchset progresses as follows: - Patch #1 introduces a bridge option to enable the above feature. Then patches #2 to #5 gradually patch the bridge to do the right thing when the option is enabled. Finally patch #6 adds the UAPI knob and the code for when the feature is enabled or disabled. - Patches #7, #8 and #9 contain fixes and improvements to selftest libraries - Patch #10 contains a new selftest ==================== Link: https://patch.msgid.link/cover.1757004393.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

smc_lo_register_dmb() allocates DMB buffers with kzalloc(), which are later passed to get_page() in smc_rx_splice(). Since kmalloc memory is not page-backed, this triggers WARN_ON_ONCE() in get_page() and prevents holding a refcount on the buffer. This can lead to use-after-free if the memory is released before splice_to_pipe() completes. Use folio_alloc() instead, ensuring DMBs are page-backed and safe for get_page(). WARNING: CPU: 18 PID: 12152 at ./include/linux/mm.h:1330 smc_rx_splice+0xaf8/0xe20 [smc] CPU: 18 UID: 0 PID: 12152 Comm: smcapp Kdump: loaded Not tainted 6.17.0-rc3-11705-g9cf4672ecfee #10 NONE Hardware name: IBM 3931 A01 704 (z/VM 7.4.0) Krnl PSW : 0704e00180000000 000793161032696c (smc_rx_splice+0xafc/0xe20 [smc]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 001cee80007d3001 00077400000000f8 0000000000000005 0000000000000001 001cee80007d3006 0007740000001000 001c000000000000 000000009b0c99e0 0000000000001000 001c0000000000f8 001c000000000000 000003ffcc6f7c88 0007740003e98000 0007931600000005 000792969b2ff7b8 Krnl Code: 0007931610326960: af000000 mc 0,0 0007931610326964: a7f4ff43 brc 15,00079316103267ea #0007931610326968: af000000 mc 0,0 >000793161032696c: a7f4ff3f brc 15,00079316103267ea 0007931610326970: e320f1000004 lg %r2,256(%r15) 0007931610326976: c0e53fd1b5f5 brasl %r14,000793168fd5d560 000793161032697c: a7f4fbb5 brc 15,00079316103260e6 0007931610326980: b904002b lgr %r2,%r11 Call Trace: smc_rx_splice+0xafc/0xe20 [smc] smc_rx_splice+0x756/0xe20 [smc]) smc_rx_recvmsg+0xa74/0xe00 [smc] smc_splice_read+0x1ce/0x3b0 [smc] sock_splice_read+0xa2/0xf0 do_splice_read+0x198/0x240 splice_file_to_pipe+0x7e/0x110 do_splice+0x59e/0xde0 __do_splice+0x11a/0x2d0 __s390x_sys_splice+0x140/0x1f0 __do_syscall+0x122/0x280 system_call+0x6e/0x90 Last Breaking-Event-Address: smc_rx_splice+0x960/0xe20 [smc] ---[ end trace 0000000000000000 ]--- Fixes: f7a2207 ("net/smc: implement DMB-related operations of loopback-ism") Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com> Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com> Link: https://patch.msgid.link/20250917184220.801066-1-sidraya@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== selftests: Mark auto-deferring functions clearly selftests/net/lib.sh contains a suite of iproute2 wrappers that automatically schedule the corresponding cleanup through defer. The fact they do so is however not immediately obvious, one needs to know which functions are handling the deferral behind the scenes, and which expect the caller to handle cleanups themselves. A convention for these auto-deferring functions would help both writing and patch review. This patchset does so by marking these functions with an adf_ prefix. We already have a few such functions: forwarding/lib.sh has adf_mcd_start() and a few selftests add private helpers that conform to this convention. Patches #1 to #8 gradually convert individual functions, one per patch. Patch #9 renames an auto-deferring private helpers named dfr_* to adf_*. The plan is not to retro-rename all private helpers, but I happened to know about this one. Patches #10 to #12 introduce several autodefer helpers for commonly used forwarding/lib.sh functions, and opportunistically convert straightforward instances of 'action; defer counteraction' to the new helpers. Patch #13 adds some README verbiage to pitch defer and the adf_* convention. ==================== Link: https://patch.msgid.link/cover.1758821127.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The lynx_28g_pll_get function may return NULL when called with an unsupported submode argument. This function is only called from the lynx_28g_lane_set_{10gbaser,sgmii} functions, and lynx_28g_set_mode checks available modes before setting a protocol. NXP vendor kernel based on v6.6.52 however is missing any checks and connecting a 2.5/5gbase-t ethernet phy can cause null pointer dereference [1]. Check return value at every invocation and abort in the unlikely error case. Further print a warning message the first time lynx_28g_pll_get returns null, to catch this case should it occur after future changes. [1] [ 127.019924] fsl_dpaa2_eth dpni.4 eth5: dpmac_set_protocol(2500base-x) = -ENOTSUPP [ 127.027451] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 [ 127.036245] Mem abort info: [ 127.039044] ESR = 0x0000000096000004 [ 127.042794] EC = 0x25: DABT (current EL), IL = 32 bits [ 127.048107] SET = 0, FnV = 0 [ 127.051161] EA = 0, S1PTW = 0 [ 127.054301] FSC = 0x04: level 0 translation fault [ 127.059179] Data abort info: [ 127.062059] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 127.067547] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 127.072596] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 127.077907] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020816c9000 [ 127.084344] [0000000000000014] pgd=0000000000000000, p4d=0000000000000000 [ 127.091133] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 127.097390] Modules linked in: cfg80211 rfkill fsl_jr_uio caam_jr dpaa2_caam caamkeyblob_desc crypto_engine caamhash_desc onboard_usb_hub caamalg_desc crct10dif_ce libdes caam error at24 rtc_ds1307 rtc_fsl_ftm_alarm nvmem_layerscape_sfp layerscape_edac_mod dm_mod nfnetlink ip_tables [ 127.122436] CPU: 5 PID: 96 Comm: kworker/u35:0 Not tainted 6.6.52-g3578ef896722 #10 [ 127.130083] Hardware name: SolidRun LX2162A Clearfog (DT) [ 127.135470] Workqueue: events_power_efficient phylink_resolve [ 127.141219] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 127.148170] pc : lynx_28g_set_lane_mode+0x300/0x818 [ 127.153041] lr : lynx_28g_set_lane_mode+0x2fc/0x818 [ 127.157909] sp : ffff8000806f3b80 [ 127.161212] x29: ffff8000806f3b80 x28: 0000000000000000 x27: 0000000000000000 [ 127.168340] x26: ffff29d6c11f3098 x25: 0000000000000000 x24: 0000000000000000 [ 127.175467] x23: ffff29d6c11f31f0 x22: ffff29d6c11f3080 x21: 0000000000000001 [ 127.182595] x20: ffff29d6c11f4c00 x19: 0000000000000000 x18: 0000000000000006 [ 127.189722] x17: 4f4e452d203d2029 x16: 782d657361623030 x15: 3532286c6f636f74 [ 127.196849] x14: 6f72705f7465735f x13: ffffd7a8ff991cc0 x12: 0000000000000acb [ 127.203976] x11: 0000000000000399 x10: ffffd7a8ff9e9cc0 x9 : 0000000000000000 [ 127.211104] x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff29d6c11f3080 [ 127.218231] x5 : 0000000000000000 x4 : 0000000040800030 x3 : 000000000000034c [ 127.225358] x2 : ffff29d6c11f3080 x1 : 000000000000034c x0 : 0000000000000000 [ 127.232486] Call trace: [ 127.234921] lynx_28g_set_lane_mode+0x300/0x818 [ 127.239443] lynx_28g_set_mode+0x12c/0x148 [ 127.243529] phy_set_mode_ext+0x5c/0xa8 [ 127.247356] lynx_pcs_config+0x64/0x294 [ 127.251184] phylink_major_config+0x184/0x49c [ 127.255532] phylink_resolve+0x2a0/0x5d8 [ 127.259446] process_one_work+0x138/0x248 [ 127.263448] worker_thread+0x320/0x438 [ 127.267187] kthread+0x114/0x118 [ 127.270406] ret_from_fork+0x10/0x20 [ 127.273973] Code: 2a1303e1 aa0603e0 97fffd3b aa0003e5 (b9401400) [ 127.280055] ---[ end trace 0000000000000000 ]--- Signed-off-by: Josua Mayer <josua@solid-run.com> Link: https://lore.kernel.org/r/20250826-lynx-28g-nullptr-v1-1-e4de0098f822@solid-run.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

Before disabling SR-IOV via config space accesses to the parent PF, sriov_disable() first removes the PCI devices representing the VFs. Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()") such removal operations are serialized against concurrent remove and rescan using the pci_rescan_remove_lock. No such locking was ever added in sriov_disable() however. In particular when commit 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device removal into sriov_del_vfs() there was still no locking around the pci_iov_remove_virtfn() calls. On s390 the lack of serialization in sriov_disable() may cause double remove and list corruption with the below (amended) trace being observed: PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56) GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001 00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480 0000000000000001 0000000000000000 0000000000000000 0000000180692828 00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8 #0 [3800313fb20] device_del at c9158ad5c #1 [3800313fb88] pci_remove_bus_device at c915105ba #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198 #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0 #4 [3800313fc60] zpci_bus_remove_device at c90fb6104 #5 [3800313fca0] __zpci_event_availability at c90fb3dca #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2 #7 [3800313fd60] crw_collect_info at c91905822 #8 [3800313fe10] kthread at c90feb390 #9 [3800313fe68] __ret_from_fork at c90f6aa64 #10 [3800313fe98] ret_from_fork at c9194f3f2. This is because in addition to sriov_disable() removing the VFs, the platform also generates hot-unplug events for the VFs. This being the reverse operation to the hotplug events generated by sriov_enable() and handled via pdev->no_vf_scan. And while the event processing takes pci_rescan_remove_lock and checks whether the struct pci_dev still exists, the lack of synchronization makes this checking racy. Other races may also be possible of course though given that this lack of locking persisted so long observable races seem very rare. Even on s390 the list corruption was only observed with certain devices since the platform events are only triggered by config accesses after the removal, so as long as the removal finished synchronously they would not race. Either way the locking is missing so fix this by adding it to the sriov_del_vfs() helper. Just like PCI rescan-remove, locking is also missing in sriov_add_vfs() including for the error case where pci_stop_and_remove_bus_device() is called without the PCI rescan-remove lock being held. Even in the non-error case, adding new PCI devices and buses should be serialized via the PCI rescan-remove lock. Add the necessary locking. Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Julian Ruess <julianr@linux.ibm.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com

The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 #6 0x565358f6682e in run_test_child builtin-test.c:344 #7 0x565358ef7121 in start_command run-command.c:128 #8 0x565358f67273 in start_test builtin-test.c:545 #9 0x565358f6771d in __cmd_test builtin-test.c:647 #10 0x565358f682bd in cmd_test builtin-test.c:849 #11 0x565358ee5ded in run_builtin perf.c:349 #12 0x565358ee6085 in handle_internal_command perf.c:401 #13 0x565358ee61de in run_argv perf.c:448 #14 0x565358ee6527 in main perf.c:555 #15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 #16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.ibm.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is a follow up of commit aa251c8 ("tcp: fix too slow tcp_rcvbuf_grow() action") which brought again the issue that I tried to fix in commit 65c5287 ("tcp: fix sk_rcvbuf overshoot") We also recently increased tcp_rmem[2] to 32 MB in commit 572be9b ("tcp: increase tcp_rmem[2] to 32 MB") Idea of this patch is to not let tcp_rcvbuf_grow() grow sk->sk_rcvbuf too fast for small RTT flows. If sk->sk_rcvbuf is too big, this can force NIC driver to not recycle pages from their page pool, and also can cause cache evictions for DDIO enabled cpus/NIC, as receivers are usually slower than senders. Add net.ipv4.tcp_rcvbuf_low_rtt sysctl, set by default to 1000 usec (1 ms) If RTT if smaller than the sysctl value, use the RTT/tcp_rcvbuf_low_rtt ratio to control sk_rcvbuf inflation. Tested: Pair of hosts with a 200Gbit IDPF NIC. Using netperf/netserver Client initiates 8 TCP bulk flows, asking netserver to use CPU #10 only. super_netperf 8 -H server -T,10 -l 30 On server, use perf -e tcp:tcp_rcvbuf_grow while test is running. Before: sysctl -w net.ipv4.tcp_rcvbuf_low_rtt=1 perf record -a -e tcp:tcp_rcvbuf_grow sleep 30 ; perf script|tail -20|cut -c30-230 1153.051201: tcp:tcp_rcvbuf_grow: time=398 rtt_us=382 copied=6905856 inq=180224 space=6115328 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1153.138752: tcp:tcp_rcvbuf_grow: time=446 rtt_us=413 copied=5529600 inq=180224 space=4505600 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=21286912 famil 1153.361484: tcp:tcp_rcvbuf_grow: time=415 rtt_us=380 copied=7061504 inq=204800 space=6725632 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1153.457642: tcp:tcp_rcvbuf_grow: time=483 rtt_us=421 copied=5885952 inq=720896 space=4407296 ooo=0 scaling_ratio=240 rcvbuf=23763511 rcv_ssthresh=22223271 window_clamp=22278291 rcv_wnd=21430272 famil 1153.466002: tcp:tcp_rcvbuf_grow: time=308 rtt_us=281 copied=3244032 inq=180224 space=2883584 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41992059 window_clamp=42050919 rcv_wnd=41713664 famil 1153.747792: tcp:tcp_rcvbuf_grow: time=394 rtt_us=332 copied=4460544 inq=585728 space=3063808 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41992059 window_clamp=42050919 rcv_wnd=41373696 famil 1154.260747: tcp:tcp_rcvbuf_grow: time=652 rtt_us=226 copied=10977280 inq=737280 space=9486336 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29197743 window_clamp=29217691 rcv_wnd=28368896 fami 1154.375019: tcp:tcp_rcvbuf_grow: time=461 rtt_us=443 copied=7573504 inq=507904 space=6856704 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25288704 famil 1154.463072: tcp:tcp_rcvbuf_grow: time=494 rtt_us=408 copied=7983104 inq=200704 space=7065600 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25579520 famil 1154.474658: tcp:tcp_rcvbuf_grow: time=507 rtt_us=459 copied=5586944 inq=540672 space=4718592 ooo=0 scaling_ratio=240 rcvbuf=17852266 rcv_ssthresh=16692999 window_clamp=16736499 rcv_wnd=16056320 famil 1154.584657: tcp:tcp_rcvbuf_grow: time=494 rtt_us=427 copied=8126464 inq=204800 space=7782400 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1154.702117: tcp:tcp_rcvbuf_grow: time=480 rtt_us=406 copied=5734400 inq=180224 space=5349376 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=21286912 famil 1155.941595: tcp:tcp_rcvbuf_grow: time=717 rtt_us=670 copied=11042816 inq=3784704 space=7159808 ooo=0 scaling_ratio=240 rcvbuf=19581357 rcv_ssthresh=18333222 window_clamp=18357522 rcv_wnd=14614528 fam 1156.384735: tcp:tcp_rcvbuf_grow: time=529 rtt_us=473 copied=9011200 inq=180224 space=7258112 ooo=0 scaling_ratio=240 rcvbuf=19581357 rcv_ssthresh=18333222 window_clamp=18357522 rcv_wnd=18018304 famil 1157.821676: tcp:tcp_rcvbuf_grow: time=529 rtt_us=272 copied=8224768 inq=602112 space=6545408 ooo=0 scaling_ratio=240 rcvbuf=67000000 rcv_ssthresh=62793576 window_clamp=62812500 rcv_wnd=62115840 famil 1158.906379: tcp:tcp_rcvbuf_grow: time=710 rtt_us=445 copied=11845632 inq=540672 space=10240000 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29205935 window_clamp=29217691 rcv_wnd=28536832 fam 1164.600160: tcp:tcp_rcvbuf_grow: time=841 rtt_us=430 copied=12976128 inq=1290240 space=11304960 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29212591 window_clamp=29217691 rcv_wnd=27856896 fa 1165.163572: tcp:tcp_rcvbuf_grow: time=845 rtt_us=800 copied=12632064 inq=540672 space=7921664 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25912795 window_clamp=25937095 rcv_wnd=25260032 fami 1165.653464: tcp:tcp_rcvbuf_grow: time=388 rtt_us=309 copied=4493312 inq=180224 space=3874816 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41995899 window_clamp=42050919 rcv_wnd=41713664 famil 1166.651211: tcp:tcp_rcvbuf_grow: time=556 rtt_us=553 copied=6328320 inq=540672 space=5554176 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=20946944 famil After: sysctl -w net.ipv4.tcp_rcvbuf_low_rtt=1000 perf record -a -e tcp:tcp_rcvbuf_grow sleep 30 ; perf script|tail -20|cut -c30-230 1457.053149: tcp:tcp_rcvbuf_grow: time=128 rtt_us=24 copied=1441792 inq=40960 space=1269760 ooo=0 scaling_ratio=240 rcvbuf=2960741 rcv_ssthresh=2605474 window_clamp=2775694 rcv_wnd=2568192 family=AF_I 1458.000778: tcp:tcp_rcvbuf_grow: time=128 rtt_us=31 copied=1441792 inq=24576 space=1400832 ooo=0 scaling_ratio=240 rcvbuf=3060163 rcv_ssthresh=2810042 window_clamp=2868902 rcv_wnd=2674688 family=AF_I 1458.088059: tcp:tcp_rcvbuf_grow: time=190 rtt_us=110 copied=3227648 inq=385024 space=2781184 ooo=0 scaling_ratio=240 rcvbuf=6728240 rcv_ssthresh=6252705 window_clamp=6307725 rcv_wnd=5799936 family=AF 1458.148549: tcp:tcp_rcvbuf_grow: time=232 rtt_us=129 copied=3956736 inq=237568 space=2842624 ooo=0 scaling_ratio=240 rcvbuf=6731333 rcv_ssthresh=6252705 window_clamp=6310624 rcv_wnd=5918720 family=AF 1458.466861: tcp:tcp_rcvbuf_grow: time=193 rtt_us=83 copied=2949120 inq=180224 space=2457600 ooo=0 scaling_ratio=240 rcvbuf=5751438 rcv_ssthresh=5357689 window_clamp=5391973 rcv_wnd=5054464 family=AF_ 1458.775476: tcp:tcp_rcvbuf_grow: time=257 rtt_us=127 copied=4304896 inq=352256 space=3346432 ooo=0 scaling_ratio=240 rcvbuf=8067131 rcv_ssthresh=7523275 window_clamp=7562935 rcv_wnd=7061504 family=AF 1458.776631: tcp:tcp_rcvbuf_grow: time=200 rtt_us=96 copied=3260416 inq=143360 space=2768896 ooo=0 scaling_ratio=240 rcvbuf=6397256 rcv_ssthresh=5938567 window_clamp=5997427 rcv_wnd=5828608 family=AF_ 1459.707973: tcp:tcp_rcvbuf_grow: time=215 rtt_us=96 copied=2506752 inq=163840 space=1388544 ooo=0 scaling_ratio=240 rcvbuf=3068867 rcv_ssthresh=2768282 window_clamp=2877062 rcv_wnd=2555904 family=AF_ 1460.246494: tcp:tcp_rcvbuf_grow: time=231 rtt_us=80 copied=3756032 inq=204800 space=3117056 ooo=0 scaling_ratio=240 rcvbuf=7288091 rcv_ssthresh=6773725 window_clamp=6832585 rcv_wnd=6471680 family=AF_ 1460.714596: tcp:tcp_rcvbuf_grow: time=270 rtt_us=110 copied=4714496 inq=311296 space=3719168 ooo=0 scaling_ratio=240 rcvbuf=8957739 rcv_ssthresh=8339020 window_clamp=8397880 rcv_wnd=7933952 family=AF 1462.029977: tcp:tcp_rcvbuf_grow: time=101 rtt_us=19 copied=1105920 inq=40960 space=1036288 ooo=0 scaling_ratio=240 rcvbuf=2338970 rcv_ssthresh=2091684 window_clamp=2192784 rcv_wnd=1986560 family=AF_I 1462.802385: tcp:tcp_rcvbuf_grow: time=89 rtt_us=45 copied=1069056 inq=0 space=1064960 ooo=0 scaling_ratio=240 rcvbuf=2338970 rcv_ssthresh=2091684 window_clamp=2192784 rcv_wnd=2035712 family=AF_INET6 1462.918648: tcp:tcp_rcvbuf_grow: time=105 rtt_us=33 copied=1441792 inq=180224 space=1069056 ooo=0 scaling_ratio=240 rcvbuf=2383282 rcv_ssthresh=2091684 window_clamp=2234326 rcv_wnd=1896448 family=AF_ 1463.222533: tcp:tcp_rcvbuf_grow: time=273 rtt_us=144 copied=4603904 inq=385024 space=3469312 ooo=0 scaling_ratio=240 rcvbuf=8422564 rcv_ssthresh=7891053 window_clamp=7896153 rcv_wnd=7409664 family=AF 1466.519312: tcp:tcp_rcvbuf_grow: time=130 rtt_us=23 copied=1343488 inq=0 space=1261568 ooo=0 scaling_ratio=240 rcvbuf=2780158 rcv_ssthresh=2493778 window_clamp=2606398 rcv_wnd=2494464 family=AF_INET6 1466.681003: tcp:tcp_rcvbuf_grow: time=128 rtt_us=21 copied=1441792 inq=12288 space=1343488 ooo=0 scaling_ratio=240 rcvbuf=2932027 rcv_ssthresh=2578555 window_clamp=2748775 rcv_wnd=2568192 family=AF_I 1470.689959: tcp:tcp_rcvbuf_grow: time=255 rtt_us=122 copied=3932160 inq=204800 space=3551232 ooo=0 scaling_ratio=240 rcvbuf=8182038 rcv_ssthresh=7647384 window_clamp=7670660 rcv_wnd=7442432 family=AF 1471.754154: tcp:tcp_rcvbuf_grow: time=188 rtt_us=95 copied=2138112 inq=577536 space=1429504 ooo=0 scaling_ratio=240 rcvbuf=3113650 rcv_ssthresh=2806426 window_clamp=2919046 rcv_wnd=2248704 family=AF_ 1476.813542: tcp:tcp_rcvbuf_grow: time=269 rtt_us=99 copied=3088384 inq=180224 space=2564096 ooo=0 scaling_ratio=240 rcvbuf=6219470 rcv_ssthresh=5771893 window_clamp=5830753 rcv_wnd=5509120 family=AF_ 1477.738309: tcp:tcp_rcvbuf_grow: time=166 rtt_us=54 copied=1777664 inq=180224 space=1417216 ooo=0 scaling_ratio=240 rcvbuf=3117118 rcv_ssthresh=2874958 window_clamp=2922298 rcv_wnd=2613248 family=AF_ We can see sk_rcvbuf values are much smaller, and that rtt_us (estimation of rtt from a receiver point of view) is kept small, instead of being bloated. No difference in throughput. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20251119084813.3684576-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mswiatko and others added 8 commits September 22, 2021 21:19

net: include xdp generic metadata definition

92adc5d

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

ice: use xdp generic metadata

aef5c23

As starting point add vlan id and rss hash if xdp metadata is supported. Add xd_metadata_support field in VSI to allow easy passing this value to ring configuration. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

[TEMP] bpf: use xdp_meta_generic in kernel

20f3208

Type needs to be used in the kernel in order to be present in vmlinux BTF. Future Alex's changes to cpumap will ensure this, but for now we just declare a variable of the required type in a random place for testing purposes.

samples: bpf: Improve user experience in xdp_meta sample

5520689

Ensure that xdp program is detached before user program termination. Print out trace_pipe. This allows to run example multiple times without additional commands.

bpf: samples: Print out hash and RX VID

8c1d5da

It was tested on an untagged VLAN, so VID seem to be garbage. Hash looks fine, as well as hardcoded values.

alobakin closed this Sep 28, 2022

alobakin deleted the generic-metadata-sample-probe branch September 28, 2022 10:57

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

[Another draft] Working generic metadata sample #10

[Another draft] Working generic metadata sample #10

Uh oh!

walking-machine commented Oct 7, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

4 participants

[Another draft] Working generic metadata sample #10

[Another draft] Working generic metadata sample #10

Uh oh!

Conversation

walking-machine commented Oct 7, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

4 participants