Generic metadata sample core #8

mswiatko · 2021-09-16T14:04:07Z

Sorry, I a little mess up with pull request to master. Let's trade this as draft.

Second approach to inform driver about metadata. Let user decide if metadata should be supported or not. Add this flag to allow user to inform driver that metadata is used. Set flag is sent to driver via exsisting ndo_bpf call in flag field. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

As starting point add vlan id and rss hash if xdp metadata is supported. Add xd_metadata_support field in VSI to allow easy passing this value to ring configuration. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ido Schimmel says: ==================== mlxsw: Add support for transceiver modules reset This patchset prepares mlxsw for future transceiver modules related [1] changes and adds reset support via the existing 'ETHTOOL_RESET' interface. Patches #1-#6 are relatively straightforward preparations. Patch #7 tracks the number of logical ports that are mapped to the transceiver module and the number of logical ports using it that are administratively up. Needed for both reset support and power mode policy support. Patches #8-#9 add required fields in device registers. Patch #10 implements support for ethtool_ops::reset in order to reset transceiver modules. [1] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Biju Das says: ==================== Fillup stubs for Gigabit Ethernet driver support The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are similar to the R-Car Ethernet AVB IP. The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). With a few changes in the driver we can support both IPs. This patch series is for adding Gigabit ethernet driver support to RZ/G2L SoC. The number of patches after incorporatng RFC review comments is 18. So split the patches into 2 patchsets (10 + 8). This series is the second patchset, aims to fillup all the stubs for the Gigabit Ethernet driver. This patch series depend upon [1] [1] https://lore.kernel.org/linux-renesas-soc/20211001150636.7500-1-biju.das.jz@bp.renesas.com/T/#t RFC->V1: * used rx_max_buf_size instead of rx_2k_buffers feature bit. * renamed "rgeth" to "gbeth". * renamed ravb_rx_ring_free to ravb_rx_ring_free_rcar * renamed ravb_rx_ring_format to ravb_rx_ring_format_rcar * renamed ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar * renamed ravb_rcar_rx to ravb_rx_rcar * Added Sergey's Rb tag for patch #6. * Moved CSR0 initialization to patch #8. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

On a i.MX-based board with a QCA9377 Wifi chip, the following errors are seen after launching the 'hostapd' application: hostapd /etc/wifi.conf Configuration file: /etc/wifi.conf wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid" IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: interface state COUNTRY_UPDATE->ENABLED wlan0: AP-ENABLED NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! ... Fix this problem by adding the BH locking around napi-schedule(), in the same way it was done in commit e63052a ("mlx5e: add add missing BH locking around napi_schdule()"). Its commit log provides the following explanation: "It's not correct to call napi_schedule() in pure process context. Because we use __raise_softirq_irqoff() we require callers to be in a context which will eventually lead to softirq handling (hardirq, bh disabled, etc.). With code as is users will see: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! " Fixes: cfee879 ("ath10k: enable napi on RX path for sdio") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824144339.2796122-1-festevam@denx.de

Ido Schimmel says: ==================== selftests: forwarding: Add ip6gre tests This patchset adds forwarding selftests for ip6gre. The tests can be run with veth pairs or with physical loopbacks. Patch #1 adds a new config option to determine if 'skip_sw' / 'skip_hw' flags are used when installing tc filters. By default, it is not set which means the flags are not used. 'skip_sw' is useful to ensure traffic is forwarded by the hardware data path. Patch #2 adds a new helper function. Patches #3-#4 add the forwarding selftests. Patch #5 adds a mlxsw-specific selftest to validate correct behavior of the 'decap_error' trap with IPv6 underlay. Patches #6-#8 align the corresponding IPv4 underlay test to the IPv6 one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== mlxsw: Multi-level qdisc offload Petr says: Currently, mlxsw admits for offload a suitable root qdisc, and its children. Thus up to two levels of hierarchy are offloaded. Often, this is enough: one can configure TCs with RED and TCs with a shaper on, and can even see counters for each TC by looking at a qdisc at a sufficiently shallow position. While simple, the system has obvious shortcomings. It is not possible to configure both RED and shaping on one TC. It is not possible to place a PRIO below root TBF, which would then be offloaded as port shaper. FIFOs are only offloaded at root or directly below, which is confusing to users, because RED and TBF of course have their own FIFO. This patch set lifts assumptions that prevent offloading multi-level qdisc trees. In patch #1, offload of a graft operation is added to TBF. Grafts are issued as another qdisc is linked to the qdisc in question, and give drivers a chance to react to the linking. The absence of this event was not a major issue so far, because TBF was not considered classful, which changes with this patchset. The codebase currently assumes that ETS and PRIO are the only classful qdiscs. The following patches gradually lift this assumption. In patch #2, calculation of traffic class and priomap of a qdisc is fixed. Patch #3 fixes handling of future FIFOs. Child FIFO qdiscs may be created and notified before their parent qdisc exists and therefore need special handling. Patches #4, #5 and #6 unify, respectively, child destruction, child grafting, and cleanup of statistics. Patch #7 adds a function that validates whether a given qdisc topology is offloadable. Finally in patch #8, TBF and RED become classful. At this point, FIFO qdiscs grafted to an offloaded qdisc should always be offloaded. Patch #9 adds a selftest to verify some offloadable and unoffloadable qdisc trees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Support multiple RIF MAC prefixes Currently, mlxsw enforces that all the netdevs used as router interfaces (RIFs) have the same MAC prefix (e.g., same 38 MSBs in Spectrum-1). Otherwise, an error is returned to user space with extack. This patchset relaxes the limitation through the use of RIF MAC profiles. A RIF MAC profile is a hardware entity that represents a particular MAC prefix which multiple RIFs can reference. Therefore, the number of possible MAC prefixes is no longer one, but the number of profiles supported by the device. The ability to change the MAC of a particular netdev is useful, for example, for users who use the netdev to connect to an upstream provider that performs MAC filtering. Currently, such users are either forced to negotiate with the provider or change the MAC address of all other netdevs so that they share the same prefix. Patchset overview: Patches #1-#3 are preparations. Patch #4 adds actual support for RIF MAC profiles. Patch #5 exposes RIF MAC profiles as a devlink resource, so that user space has visibility into the maximum number of profiles and current occupancy. Useful for debugging and testing (next 3 patches). Patches #6-#8 add both scale and functional tests. Patch #9 removes tests that validated the previous limitation. It is now covered by patch #6 for devices that support a single profile. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ido Schimmel says: ==================== mlxsw: Add support for VxLAN with IPv6 underlay So far, mlxsw only supported VxLAN with IPv4 underlay. This patchset extends mlxsw to also support VxLAN with IPv6 underlay. The main difference is related to the way IPv6 addresses are handled by the device. See patch #1 for a detailed explanation. Patch #1 creates a common hash table to store the mapping from IPv6 addresses to KVDL indexes. This table is useful for both IP-in-IP and VxLAN tunnels with an IPv6 underlay. Patch #2 converts the IP-in-IP code to use the new hash table. Patches #3-#6 are preparations. Patch #7 finally adds support for VxLAN with IPv6 underlay. Patch #8 removes a test case that checked that VxLAN configurations with IPv6 underlay are vetoed by the driver. A follow-up patchset will add forwarding selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Amit Cohen says: ==================== Add tests for VxLAN with IPv6 underlay mlxsw driver lately added support for VxLAN with IPv6 underlay. This set adds the relevant tests for IPv6, most of them are same to IPv4 tests with the required changes. Patch set overview: Patch #1 relaxes requirements for offloading TC filters that match on 802.1q fields. The following selftests make use of these newly-relaxed filters. Patch #2 adds preparation as part of selftests API, which will be used later. Patches #3-#4 add tests for VxLAN with bridge aware and unaware. Patche #5 cleans unused function. Patches #6-#7 add tests for VxLAN symmetric and asymmetric. Patch #8 adds test for Q-in-VNI. ==================== Link: https://lore.kernel.org/r/20211221144949.2527545-1-amcohen@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Amit Cohen says: ==================== mlxsw: Add tests for VxLAN with IPv6 underlay mlxsw driver lately added support for VxLAN with IPv6 underlay. This set adds tests for IPv6, which are dedicated for mlxsw. Patch set overview: Patches #1-#2 make vxlan.sh test more flexible and extend it for IPv6 Patches #3-#4 make vxlan_fdb_veto.sh test more flexible and extend it for IPv6 Patches #5-#6 add tests for VxLAN flooding for different ASICs Patches #7-#8 add test for VxLAN related traps and align the existing test ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 </TASK> =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Add Spectrum-4 support This patchset adds Spectrum-4 support in mlxsw. It builds on top of a previous patchset merged in commit 10184da ("Merge branch 'mlxsw-Spectrum-4-prep'") and makes two additional changes before adding Spectrum-4 support. Patchset overview: Patches #1-#2 add a few Spectrum-4 specific variants of existing ACL keys. The new variants are needed because the size of certain key elements (e.g., local port) was increased in Spectrum-4. Patches #3-#6 are preparations. Patch #7 implements the Spectrum-4 variant of the Bloom filter hash function. The Bloom filter is used to optimize ACL lookups by potentially skipping certain lookups if they are guaranteed not to match. See additional info in merge commit ae6750e ("Merge branch 'mlxsw-spectrum_acl-Add-Bloom-filter-support'"). Patch #8 finally adds Spectrum-4 support. ==================== Link: https://lore.kernel.org/r/20220106160652.821176-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== HW counters for soft devices Petr says: Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as a VLAN. In this patch set, add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question, and add mlxsw offload. Across HW platforms, the counter itself very likely constitutes a limited resource, and the act of counting may have a performance impact. Therefore this patch set makes the HW statistics collection opt-in and togglable from userspace on a per-netdevice basis. Additionally, HW devices may have various limiting conditions under which they can realize the counter. Therefore it is also possible to query whether the requested counter is realized by any driver. In TC parlance, which is to a degree reused in this patch set, two values are recognized: "request" tracks whether the user enabled collecting HW statistics, and "used" tracks whether any HW statistics are actually collected. In the past, this author has expressed the opinion that `a typical user doing "ip -s l sh", including various scripts, wants to see the full picture and not worry what's going on where'. While that would be nice, unfortunately it cannot work: - Packets that trap from the HW datapath to the SW datapath would be double counted. For a given netdevice, some traffic can be purely a SW artifact, and some may flow through the HW object corresponding to the netdevice. But some traffic can also get trapped to the SW datapath after bumping the HW counter. It is not clear how to make sure double-counting does not occur in the SW datapath in that case, while still making sure that possibly divergent SW forwarding path gets bumped as appropriate. So simply adding HW and SW stats may work roughly, most of the time, but there are scenarios where the result is nonsensical. - HW devices will have limitations as to what type of traffic they can count. In case of mlxsw, which is part of this patch set, there is no reasonable way to count all traffic going through a certain netdevice, such as a VLAN netdevice enslaved to a bridge. It is however very simple to count traffic flowing through an L3 object, such as a VLAN netdevice with an IP address. Similarly for physical netdevices, the L3 object at which the counter is installed is the subport carrying untagged traffic. These are not "just counters". It is important that the user understands what is being counted. It would be incorrect to conflate these statistics with another existing statistics suite. To that end, this patch set introduces a statistics suite called "L3 stats". This label should make it easy to understand what is being counted, and to decide whether a given device can or cannot implement this suite for some type of netdevice. At the same time, the code is written to make future extensions easy, should a device pop up that can implement a different flavor of statistics suite (say L2, or an address-family-specific suite). For example, using a work-in-progress iproute2[1], to turn on and then list the counters on a VLAN netdevice: # ip stats set dev swp1.200 l3_stats on # ip stats show dev swp1.200 group offload subgroup l3_stats 56: swp1.200: group offload subgroup l3_stats on used on RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 The patchset progresses as follows: - Patch #1 is a cleanup. - In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are dev-backed. The only attribute defined under the nest is currently IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the driver that supplies the statistics is not the same as the driver that implements the netdevice. Make the code compatible with this in patch #2. - In patch #3, add the possibility to filter inside nests. The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. In this patch, the UAPI is extended to allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular, but the scheme is easily extensible to other nests as well. - In patch #4, propagate extack where we need it. In patch #5, make it possible to propagate errors from drivers to the user. - In patch #6, add the in-kernel APIs for keeping track of the new stats suite, and the notifiers that the core uses to communicate with the drivers. - In patch #7, add UAPI for obtaining the new stats suite. - In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry the message to toggle the newly-added stats suite. In patch #9, add the toggle itself. At this point the core is ready for drivers to add support for the new stats suite. - In patches #10, #11 and #12, apply small tweaks to mlxsw code. - In patch #13, add support for L3 stats, which are realized as RIF counters. - Finally in patch #14, a selftest is added to the net/forwarding directory. Technically this is a HW-specific test, in that without a HW implementing the counters, it just will not pass. But devices that support L3 statistics at all are likely to be able to reuse this selftest, so it seems appropriate to put it in the general forwarding directory. We also have a netdevsim implementation, and a corresponding selftest that verifies specifically some of the core code. We intend to contribute these later. Interested parties can take a look at the raw code at [2]. [1] https://github.com/pmachata/iproute2/commits/soft_counters [2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2 v2: - Patch #3: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Use NLA_POLICY_NESTED to declare what the nest contents should be - Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering attribute. - Patch #6: - s/monotonous/monotonic/ in commit message - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #7: - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #8: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Patch #13: - Use a newly-added struct rtnl_hw_stats64 for stats transfer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The per-channel data is available directly in the driver data struct. So use it without making use of pwm_[gs]et_chip_data(). The relevant change introduced by this patch to lpc18xx_pwm_disable() at the assembler level (for an arm lpc18xx_defconfig build) is: push {r3, r4, r5, lr} mov r4, r0 mov r0, r1 mov r5, r1 bl 0 <pwm_get_chip_data> ldr r3, [r0, #0] changes to ldr r3, [r1, #8] push {r4, lr} add.w r3, r0, r3, lsl #2 ldr r3, [r3, torvalds#92] ; 0x5c So this reduces stack usage, has an improved runtime behavior because of better pipeline usage, doesn't branch to an external function and the generated code is a bit smaller occupying less memory. The codesize of lpc18xx_pwm_probe() is reduced by 32 bytes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The BPF STX/LDX instruction uses offset relative to the FP to address stack space. Since the BPF_FP locates at the top of the frame, the offset is usually a negative number. However, arm64 str/ldr immediate instruction requires that offset be a positive number. Therefore, this patch tries to convert the offsets. The method is to find the negative offset furthest from the FP firstly. Then add it to the FP, calculate a bottom position, called FPB, and then adjust the offsets in other STR/LDX instructions relative to FPB. FPB is saved using the callee-saved register x27 of arm64 which is not used yet. Before adjusting the offset, the patch checks every instruction to ensure that the FP does not change in run-time. If the FP may change, no offset is adjusted. For example, for the following bpftrace command: bpftrace -e 'kprobe:do_sys_open { printf("opening: %s\n", str(arg1)); }' Without this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: mov x25, sp 1c: mov x26, #0x0 // #0 20: bti j 24: sub sp, sp, #0x90 28: add x19, x0, #0x0 2c: mov x0, #0x0 // #0 30: mov x10, #0xffffffffffffff78 // #-136 34: str x0, [x25, x10] 38: mov x10, #0xffffffffffffff80 // #-128 3c: str x0, [x25, x10] 40: mov x10, #0xffffffffffffff88 // #-120 44: str x0, [x25, x10] 48: mov x10, #0xffffffffffffff90 // #-112 4c: str x0, [x25, x10] 50: mov x10, #0xffffffffffffff98 // #-104 54: str x0, [x25, x10] 58: mov x10, #0xffffffffffffffa0 // #-96 5c: str x0, [x25, x10] 60: mov x10, #0xffffffffffffffa8 // #-88 64: str x0, [x25, x10] 68: mov x10, #0xffffffffffffffb0 // #-80 6c: str x0, [x25, x10] 70: mov x10, #0xffffffffffffffb8 // #-72 74: str x0, [x25, x10] 78: mov x10, #0xffffffffffffffc0 // #-64 7c: str x0, [x25, x10] 80: mov x10, #0xffffffffffffffc8 // #-56 84: str x0, [x25, x10] 88: mov x10, #0xffffffffffffffd0 // #-48 8c: str x0, [x25, x10] 90: mov x10, #0xffffffffffffffd8 // #-40 94: str x0, [x25, x10] 98: mov x10, #0xffffffffffffffe0 // #-32 9c: str x0, [x25, x10] a0: mov x10, #0xffffffffffffffe8 // #-24 a4: str x0, [x25, x10] a8: mov x10, #0xfffffffffffffff0 // #-16 ac: str x0, [x25, x10] b0: mov x10, #0xfffffffffffffff8 // #-8 b4: str x0, [x25, x10] b8: mov x10, #0x8 // #8 bc: ldr x2, [x19, x10] [...] With this patch, jited code(fragment): 0: bti c 4: stp x29, x30, [sp, #-16]! 8: mov x29, sp c: stp x19, x20, [sp, #-16]! 10: stp x21, x22, [sp, #-16]! 14: stp x25, x26, [sp, #-16]! 18: stp x27, x28, [sp, #-16]! 1c: mov x25, sp 20: sub x27, x25, #0x88 24: mov x26, #0x0 // #0 28: bti j 2c: sub sp, sp, #0x90 30: add x19, x0, #0x0 34: mov x0, #0x0 // #0 38: str x0, [x27] 3c: str x0, [x27, #8] 40: str x0, [x27, #16] 44: str x0, [x27, #24] 48: str x0, [x27, torvalds#32] 4c: str x0, [x27, torvalds#40] 50: str x0, [x27, torvalds#48] 54: str x0, [x27, torvalds#56] 58: str x0, [x27, torvalds#64] 5c: str x0, [x27, torvalds#72] 60: str x0, [x27, torvalds#80] 64: str x0, [x27, torvalds#88] 68: str x0, [x27, torvalds#96] 6c: str x0, [x27, torvalds#104] 70: str x0, [x27, torvalds#112] 74: str x0, [x27, torvalds#120] 78: str x0, [x27, torvalds#128] 7c: ldr x2, [x19, #8] [...] Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321152852.2334294-4-xukuohai@huawei.com

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Ido Schimmel says: ==================== mlxsw: Preparations for line cards support Currently, mlxsw registers thermal zones as well as hwmon entries for objects such as transceiver modules and gearboxes. In upcoming modular systems, these objects are no longer found on the main board (i.e., slot 0), but on plug-able line cards. This patchset prepares mlxsw for such systems in terms of hwmon, thermal and cable access support. Patches #1-#3 gradually prepare mlxsw for transceiver modules access support for line cards by splitting some of the internal structures and some APIs. Patches #4-#5 gradually prepare mlxsw for hwmon support for line cards by splitting some of the internal structures and augmenting them with a slot index. Patches #6-#7 do the same for thermal zones. Patch #8 selects cooling device for binding to a thermal zone by exact name match to prevent binding to non-relevant devices. Patch #9 replaces internal define for thermal zone name length with a common define. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Introduce line card support for modular switch Jiri says: This patchset introduces support for modular switch systems and also introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch. It contains 8 slots to accommodate line cards - replaceable PHY modules which may contain gearboxes. Currently supported line card: 16X 100GbE (QSFP28) Other line cards that are going to be supported: 8X 200GbE (QSFP56) 4X 400GbE (QSFP-DD) There may be other types of line cards added in the future. To be consistent with the port split configuration (splitter cabels), the line card entities are treated in the similar way. The nature of a line card is not "a pluggable device", but "a pluggable PHY module". A concept of "provisioning" is introduced. The user may "provision" certain slot with a line card type. Driver then creates all instances (devlink ports, netdevices, etc) related to this line card type. It does not matter if the line card is plugged-in at the time. User is able to configure netdevices, devlink ports, setup port splitters, etc. From the perspective of the switch ASIC, all is present and can be configured. The carrier of netdevices stays down if the line card is not plugged-in. Once the line card is inserted and activated, the carrier of the related netdevices is then reflecting the physical line state, same as for an ordinary fixed port. Once user does not want to use the line card related instances anymore, he can "unprovision" the slot. Driver then removes the instances. Patches 1-4 are extending devlink driver API and UAPI in order to register, show, dump, provision and activate the line card. Patches 5-17 are implementing the introduced API in mlxsw. The last patch adds a selftest for mlxsw line cards. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G Note that driver exposes list supported line card types. Currently there is only one: "16x100G". To provision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 To uprovision the slot #8: $ devlink lc set pci/0000:01:00.0 lc 8 notype ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c5 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #8!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The cause of the issue was that eth_skb_pkt_type() accessed skb's data that didn't contain an Ethernet header. This occurs when bpf_prog_test_run_xdp() passes an invalid value as the user_data argument to bpf_test_init(). Fix this by returning an error when user_data is less than ETH_HLEN in bpf_test_init(). Additionally, remove the check for "if (user_size > size)" as it is unnecessary. [1] BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [inline] __se_sys_bpf kernel/bpf/syscall.c:5864 [inline] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: free_pages_prepare mm/page_alloc.c:1056 [inline] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [inline] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 worker_thread+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Fixes: be3d72a ("bpf: move user_size out of bpf_test_init") Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20250121150643.671650-1-syoshida@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

napi_schedule() is expected to be called either: * From an interrupt, where raised softirqs are handled on IRQ exit * From a softirq disabled section, where raised softirqs are handled on the next call to local_bh_enable(). * From a softirq handler, where raised softirqs are handled on the next round in do_softirq(), or further deferred to a dedicated kthread. Other bare tasks context may end up ignoring the raised NET_RX vector until the next random softirq handling opportunity, which may not happen before a while if the CPU goes idle afterwards with the tick stopped. Such "misuses" have been detected on several places thanks to messages of the kind: "NOHZ tick-stop error: local softirq work is pending, handler #8!!!" For example: __raise_softirq_irqoff __napi_schedule rtl8152_runtime_resume.isra.0 rtl8152_resume usb_resume_interface.isra.0 usb_resume_both __rpm_callback rpm_callback rpm_resume __pm_runtime_resume usb_autoresume_device usb_remote_wakeup hub_event process_one_work worker_thread kthread ret_from_fork ret_from_fork_asm And also: * drivers/net/usb/r8152.c::rtl_work_func_t * drivers/net/netdevsim/netdev.c::nsim_start_xmit There is a long history of issues of this kind: 019edd0 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 3300685 ("idpf: disable local BH when scheduling napi for marker packets") e3d5d70 ("net: lan78xx: fix "softirq work is pending" error") e55c27e ("mt76: mt7615: add missing bh-disable around rx napi schedule") c0182aa ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule") 970be1d ("mt76: disable BH around napi_schedule() calls") 019edd0 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 30bfec4 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt") e63052a ("mlx5e: add add missing BH locking around napi_schdule()") 83a0c6e ("i40e: Invoke softirqs after napi_reschedule") bd4ce94 ("mlx4: Invoke softirqs after napi_reschedule") 8cf699e ("mlx4: do not call napi_schedule() without care") ec13ee8 ("virtio_net: invoke softirqs after __napi_schedule") This shows that relying on the caller to arrange a proper context for the softirqs to be handled while calling napi_schedule() is very fragile and error prone. Also fixing them can also prove challenging if the caller may be called from different kinds of contexts. Therefore fix this from napi_schedule() itself with waking up ksoftirqd when softirqs are raised from task contexts. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/ Cc: Breno Leitao <leitao@debian.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 #11 0x5595a7c01c92 in handle_internal_command perf.c:404 #12 0x5595a7c01deb in run_argv perf.c:448 #13 0x5595a7c02134 in main perf.c:556 #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60 [ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0 From the ibmveth debug, two threads are calling veth_pool_store, which calls ibmveth_close and ibmveth_open. Here's the sequence: T4365 T4366 ----------------- ----------------- --------- veth_pool_store veth_pool_store ibmveth_close ibmveth_close napi_disable napi_disable ibmveth_open napi_enable <- HANG ibmveth_close calls napi_disable at the top and ibmveth_open calls napi_enable at the top. https://docs.kernel.org/networking/napi.html]] says The control APIs are not idempotent. Control API calls are safe against concurrent use of datapath APIs but an incorrect sequence of control API calls may result in crashes, deadlocks, or race conditions. For example, calling napi_disable() multiple times in a row will deadlock. In the normal open and close paths, rtnl_mutex is acquired to prevent other callers. This is missing from veth_pool_store. Use rtnl_mutex in veth_pool_store fixes these hangs. Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com> Fixes: 860f242 ("[PATCH] ibmveth change buffer pools dynamically") Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <2524158037@qq.com> Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com

Biju Das <biju.das.jz@bp.renesas.com> says: The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H and RZ/G2L, but differs in some hardware parameters: * No external clock, but instead has ram clock. * Support up to 6 channels. * 20 interrupts. v8->v9: * Collected tags. * Added missing header bitfield.h. * Fixed logical error ch->BIT(ch) in rcar_canfd_global_error(). * Removed unneeded double space in rcar_canfd_setrnc(). * Updated commit description in patch#15. v7->v8: * Collected tags. * Updated commit description for patch#{5,9,15,16,17}. * Replaced the macro RCANFD_GERFL_EEF0_7->RCANFD_GERFL_EEF. * Dropped the redundant macro RCANFD_GERFL_EEF(ch). * Added patch for dropping the mask operation in RCANFD_GAFLCFG_SETRNC macro. * Converted RCANFD_GAFLCFG_SETRNC->rcar_canfd_setrnc(). * Updated RCANFD_GAFLCFG macro by replacing the parameter ch->w, where w is the GAFLCFG index used in the hardware manual. * Renamed the parameter x->page_num in RCANFD_GAFLECTR_AFLPN macro to make it clear. * Renamed the parameter x->cftml in RCANFD_CFCC_CFTML macro to make it clear. * Updated {rzg2l,car_gen3_hw_info} with ch_interface_mode = 0. * Updated {rzg2l,rcar_gen3}_hw_info with shared_can_regs = 0. * Started using struct rcanfd_regs instead of LUT for reg offsets. * Started using struct rcar_canfd_shift_data instead of LUT for shift data. * Renamed only_internal_clks->external_clk to avoid negation. * Updated rcar_canfd_hw_info tables with external_clk entries. * Replaced 10->sizeof(name) in scnprintf(). v6->v7: * Collected tags * Replaced 'aswell'->'as well' in patch#11 commit description. v5->v6: * Replaced RCANFD_RNC_PER_REG macro with rnc_stride variable. * Updated commit description for patch#7 and #8 * Dropped mask_table: AFLPN_MASK is replaced by max_aflpn variable. CFTML_MASK is replaced by max_cftml variable. BITTIMING MASK's are replaced by {nom,data}_bittiming variables. * Collected tag from Geert. v4->v5: * Collected tag from Geert. * The rules for R-Car Gen3/4 could be kept together, reducing the number of lines. Similar change for rzg2l-canfd aswell. * Keeping interrupts and resets together allows to keep a clear separation between RZ/G2L and RZ/G3E, at the expense of only a single line. * Retained the tags for binding patches as it is trivial changes. * Dropped the unused macro RCANFD_GAFLCFG_GETRNC. * Updated macro RCANFD_GERFL_ERR by using gpriv->channels_mask and dropped unused macro RCANFD_GERFL_EEF0_7. * Replaced RNC mask in RCANFD_GAFLCFG_SETRNC macro by using info->num_supported_rules variable. * Updated the macro RCANFD_GAFLCFG by using info->rnc_field_width variable. * Updated shift value in RCANFD_GAFLCFG_SETRNC macro by using a formula (32 - (n % rnc_per_reg + 1) * field_width). * Replaced the variable name shared_can_reg->shared_can_regs. * Improved commit description for patch{#11,#12}by replacing has->have. * Dropped RCANFD_EEF_MASK and RCANFD_RNC_MASK as it is taken care by gpriv->channels_mask and info->num_supported_rules. * Dropped RCANFD_FIRST_RNC_SH and RCANFD_SECOND_RNC_SH by using a formula (32 - (n % rnc_per_reg + 1) * rnc_field_width. * Improved commit description by "All SoCs supports extenal clock"-> "All existing SoCs support an external clock". * Updated error description in probe as "cannot get enabled ram clock" * Updated r9a09g047_hw_info table. v3->v4: * Added Rb tag from Rob for patch#2. * Added prefix RCANFD_* to enum rcar_canfd_reg_offset_id. * Added prefix RCANFD_* to enum rcar_canfd_mask_id. * Added prefix RCANFD_* to enum rcar_canfd_shift_id. v2->v3: * Collected tags. * Dropped reg_gen4() and is_gen4() by adding mask_table, shift_table, regs, ch_interface_mode and shared_can_reg variables to struct rcar_canfd_hw_info. v1->v2: * Split the series with fixes patch separately. * Added patch for Simplify rcar_canfd_probe() using of_get_available_child_by_name() as dependency patch hit on can-next. * Added Rb tag from Vincent Mailhol. * Dropped redundant comment from commit description for patch#3. Link: https://patch.msgid.link/20250417054320.14100-1-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb. BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211] Call Trace: <IRQ> rtl8187_tx_cb+0x116/0x150 [rtl8187] __usb_hcd_giveback_urb+0x9d/0x120 usb_giveback_urb_bh+0xbb/0x140 process_one_work+0x19b/0x3c0 bh_worker+0x1a7/0x210 tasklet_action+0x10/0x30 handle_softirqs+0xf0/0x340 __irq_exit_rcu+0xcd/0xf0 common_interrupt+0x85/0xa0 </IRQ> Tested on RTL8187BvE device. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c1db52b ("rtl8187: Use usb anchor facilities to manage urbs") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250617135634.21760-1-d.dulov@aladdin.ru

Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) __alloc_skb (net/core/skbuff.c:660 (discriminator 4)) alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668) sock_alloc_send_pskb (net/core/sock.c:2993) unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418) __sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20)) __x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1)) __kasan_slab_free (mm/kasan/common.c:271) kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3)) unix_stream_read_generic (net/unix/af_unix.c:3010) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The buggy address belongs to the object at ffff888106ef28c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 68 bytes inside of freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x200000000000040(head|node=0|zone=2) page_type: f5(slab) raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 314001f ("af_unix: Add OOB support") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jann Horn <jannh@google.com> Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A crash in conntrack was reported while trying to unlink the conntrack entry from the hash bucket list: [exception RIP: __nf_ct_delete_from_lists+172] [..] #7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack] #8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack] #9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack] [..] The nf_conn struct is marked as allocated from slab but appears to be in a partially initialised state: ct hlist pointer is garbage; looks like the ct hash value (hence crash). ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected ct->timeout is 30000 (=30s), which is unexpected. Everything else looks like normal udp conntrack entry. If we ignore ct->status and pretend its 0, the entry matches those that are newly allocated but not yet inserted into the hash: - ct hlist pointers are overloaded and store/cache the raw tuple hash - ct->timeout matches the relative time expected for a new udp flow rather than the absolute 'jiffies' value. If it were not for the presence of IPS_CONFIRMED, __nf_conntrack_find_get() would have skipped the entry. Theory is that we did hit following race: cpu x cpu y cpu z found entry E found entry E E is expired <preemption> nf_ct_delete() return E to rcu slab init_conntrack E is re-inited, ct->status set to 0 reply tuplehash hnnode.pprev stores hash value. cpu y found E right before it was deleted on cpu x. E is now re-inited on cpu z. cpu y was preempted before checking for expiry and/or confirm bit. ->refcnt set to 1 E now owned by skb ->timeout set to 30000 If cpu y were to resume now, it would observe E as expired but would skip E due to missing CONFIRMED bit. nf_conntrack_confirm gets called sets: ct->status |= CONFIRMED This is wrong: E is not yet added to hashtable. cpu y resumes, it observes E as expired but CONFIRMED: <resumes> nf_ct_expired() -> yes (ct->timeout is 30s) confirmed bit set. cpu y will try to delete E from the hashtable: nf_ct_delete() -> set DYING bit __nf_ct_delete_from_lists Even this scenario doesn't guarantee a crash: cpu z still holds the table bucket lock(s) so y blocks: wait for spinlock held by z CONFIRMED is set but there is no guarantee ct will be added to hash: "chaintoolong" or "clash resolution" logic both skip the insert step. reply hnnode.pprev still stores the hash value. unlocks spinlock return NF_DROP <unblocks, then crashes on hlist_nulls_del_rcu pprev> In case CPU z does insert the entry into the hashtable, cpu y will unlink E again right away but no crash occurs. Without 'cpu y' race, 'garbage' hlist is of no consequence: ct refcnt remains at 1, eventually skb will be free'd and E gets destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy. To resolve this, move the IPS_CONFIRMED assignment after the table insertion but before the unlock. Pablo points out that the confirm-bit-store could be reordered to happen before hlist add resp. the timeout fixup, so switch to set_bit and before_atomic memory barrier to prevent this. It doesn't matter if other CPUs can observe a newly inserted entry right before the CONFIRMED bit was set: Such event cannot be distinguished from above "E is the old incarnation" case: the entry will be skipped. Also change nf_ct_should_gc() to first check the confirmed bit. The gc sequence is: 1. Check if entry has expired, if not skip to next entry 2. Obtain a reference to the expired entry. 3. Call nf_ct_should_gc() to double-check step 1. nf_ct_should_gc() is thus called only for entries that already failed an expiry check. After this patch, once the confirmed bit check passes ct->timeout has been altered to reflect the absolute 'best before' date instead of a relative time. Step 3 will therefore not remove the entry. Without this change to nf_ct_should_gc() we could still get this sequence: 1. Check if entry has expired. 2. Obtain a reference. 3. Call nf_ct_should_gc() to double-check step 1: 4 - entry is still observed as expired 5 - meanwhile, ct->timeout is corrected to absolute value on other CPU and confirm bit gets set 6 - confirm bit is seen 7 - valid entry is removed again First do check 6), then 4) so the gc expiry check always picks up either confirmed bit unset (entry gets skipped) or expiry re-check failure for re-inited conntrack objects. This change cannot be backported to releases before 5.19. Without commit 8a75a2c ("netfilter: conntrack: remove unconfirmed list") |= IPS_CONFIRMED line cannot be moved without further changes. Cc: Razvan Cojocaru <rzvncj@gmail.com> Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/ Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/ Fixes: 1397af5 ("netfilter: conntrack: remove the percpu dying list") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

It is reported that on Acer Nitro V15 suspend only works properly if the keyboard backlight is turned off. In looking through the issue Acer Nitro V15 has a GPIO (#8) specified in _AEI but it has no matching notify device in _EVT. The values for GPIO #8 change as keyboard backlight is turned on and off. This makes it seem that GPIO #8 is actually supposed to be solely for keyboard backlight. Turning off the interrupt for this GPIO fixes the issue. Add a quirk that does just that. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Mika Westerberg <westeri@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () #10 0x00000000100b5f94 in handle_internal_command () #11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Without the change `perf `hangs up on charaster devices. On my system it's enough to run system-wide sampler for a few seconds to get the hangup: $ perf record -a -g --call-graph=dwarf $ perf report # hung `strace` shows that hangup happens on reading on a character device `/dev/dri/renderD128` $ strace -y -f -p 2780484 strace: Process 2780484 attached pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached It's call trace descends into `elfutils`: $ gdb -p 2780484 (gdb) bt #0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0) at ../sysdeps/unix/sysv/linux/pread64.c:25 #1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1 #2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0) at util/dso.h:537 #6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114 #7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242 #8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0, thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127, best_effort=best_effort@entry=false) at util/thread.h:152 #13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939 #14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2920 #15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440, sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true) at util/machine.c:2970 #16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440, sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198 #17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0, evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127 #18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127, arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255 #19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540, evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334 #20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0, file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367 #21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245 #22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324 #23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224, file_path=0x105ffbf0 "perf.data") at util/session.c:1419 #24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0, --Type <RET> for more, q to quit, c to continue without paging-- quit prog=prog@entry=0x7fff9df81220) at util/session.c:2132 #25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220) at util/session.c:2181 #26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226 #27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390 #28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076 torvalds#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827 torvalds#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:351 torvalds#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404 torvalds#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448 torvalds#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556 The hangup happens because nothing in` perf` or `elfutils` checks if a mapped file is easily readable. The change conservatively skips all non-regular files. Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this functionality to dump_stack and switch dump_stack users to use it. Switch TUI to use it. Add stack traces to the child test function which can be useful to diagnose blocked code. Example output: ``` $ perf test -vv PERF_RECORD_ ... 7: PERF_RECORD_* events & perf_sample fields: 7: PERF_RECORD_* events & perf_sample fields : Running (1 active) ^C Signal (2) while running tests. Terminating tests with the same signal Internal test harness failure. Completing any started tests: : 7: PERF_RECORD_* events & perf_sample fields: ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #5 0x7fc12ff02d68 in __sleep sleep.c:55 #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #7 0x55788c620fb0 in run_test_child builtin-test.c:0 #8 0x55788c5bd18d in start_command run-command.c:127 #9 0x55788c621ef3 in __cmd_test builtin-test.c:0 #10 0x55788c6225bf in cmd_test ??:0 #11 0x55788c5afbd0 in run_builtin perf.c:0 #12 0x55788c5afeeb in handle_internal_command perf.c:0 #13 0x55788c52b383 in main ??:0 #14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 #15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #16 0x55788c52b9d1 in _start ??:0 ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45 #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26 #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36 #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0 #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #10 0x7fc12ff02d68 in __sleep sleep.c:55 #11 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #12 0x55788c620fb0 in run_test_child builtin-test.c:0 #13 0x55788c5bd18d in start_command run-command.c:127 #14 0x55788c621ef3 in __cmd_test builtin-test.c:0 #15 0x55788c6225bf in cmd_test ??:0 #16 0x55788c5afbd0 in run_builtin perf.c:0 #17 0x55788c5afeeb in handle_internal_command perf.c:0 #18 0x55788c52b383 in main ??:0 #19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 #20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #21 0x55788c52b9d1 in _start ??:0 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's with branch counters logging (A.K.A LBR event logging [1]) support results in a segfault. $ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter ... Thread 27 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffafff76c0 (LWP 949003)] perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 653 *width = env->cpu_pmu_caps ? env->br_cntr_width : (gdb) bt #0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 #1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345 #2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389 #3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422 #4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850 #5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737 #6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359 #7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845 #8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211 #9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245 #10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324 #11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342 #12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120 #13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448 #14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78 The cause is that perf_env__find_br_cntr_info tries to access a null pointer pmu_caps in the perf_env struct. A similar issue exists for homogeneous core systems which use the cpu_pmu_caps structure. Fix this by populating cpu_pmu_caps and pmu_caps structures with values from sysfs when calling perf top with branch stack sampling enabled. [1], LBR event logging introduced here: https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/ Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Patch series "extend hung task blocker tracking to rwsems". Inspired by mutex blocker tracking[1], and having already extended it to semaphores, let's now add support for reader-writer semaphores (rwsems). The approach is simple: when a task enters TASK_UNINTERRUPTIBLE while waiting for an rwsem, we just call hung_task_set_blocker(). The hung task detector can then query the rwsem's owner to identify the lock holder. Tracking works reliably for writers, as there can only be a single writer holding the lock, and its task struct is stored in the owner field. The main challenge lies with readers. The owner field points to only one of many concurrent readers, so we might lose track of the blocker if that specific reader unlocks, even while others remain. This is not a significant issue, however. In practice, long-lasting lock contention is almost always caused by a writer. Therefore, reliably tracking the writer is the primary goal of this patch series ;) With this change, the hung task detector can now show blocker task's info like below: [Fri Jun 27 15:21:34 2025] INFO: task cat:28631 blocked for more than 122 seconds. [Fri Jun 27 15:21:34 2025] Tainted: G S 6.16.0-rc3 #8 [Fri Jun 27 15:21:34 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [Fri Jun 27 15:21:34 2025] task:cat state:D stack:0 pid:28631 tgid:28631 ppid:28501 task_flags:0x400000 flags:0x00004000 [Fri Jun 27 15:21:34 2025] Call Trace: [Fri Jun 27 15:21:34 2025] <TASK> [Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930 [Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? policy_nodemask+0x215/0x340 [Fri Jun 27 15:21:34 2025] ? _raw_spin_lock_irq+0x8a/0xe0 [Fri Jun 27 15:21:34 2025] ? __pfx__raw_spin_lock_irq+0x10/0x10 [Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180 [Fri Jun 27 15:21:34 2025] schedule_preempt_disabled+0x15/0x30 [Fri Jun 27 15:21:34 2025] rwsem_down_read_slowpath+0x55e/0xe10 [Fri Jun 27 15:21:34 2025] ? __pfx_rwsem_down_read_slowpath+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __pfx___might_resched+0x10/0x10 [Fri Jun 27 15:21:34 2025] down_read+0xc9/0x230 [Fri Jun 27 15:21:34 2025] ? __pfx_down_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __debugfs_file_get+0x14d/0x700 [Fri Jun 27 15:21:34 2025] ? __pfx___debugfs_file_get+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? handle_pte_fault+0x52a/0x710 [Fri Jun 27 15:21:34 2025] ? selinux_file_permission+0x3a9/0x590 [Fri Jun 27 15:21:34 2025] read_dummy_rwsem_read+0x4a/0x90 [Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0 [Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410 [Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50 [Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0 [Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0 [Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0 [Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e [Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f3f8faefb40 [Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffdeda5ab98 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f3f8faefb40 [Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 00000000010fa000 RDI: 0000000000000003 [Fri Jun 27 15:21:34 2025] RBP: 00000000010fa000 R08: 0000000000000000 R09: 0000000000010fff [Fri Jun 27 15:21:34 2025] R10: 00007ffdeda59fe0 R11: 0000000000000246 R12: 00000000010fa000 [Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [Fri Jun 27 15:21:34 2025] </TASK> [Fri Jun 27 15:21:34 2025] INFO: task cat:28631 <reader> blocked on an rw-semaphore likely owned by task cat:28630 <writer> [Fri Jun 27 15:21:34 2025] task:cat state:S stack:0 pid:28630 tgid:28630 ppid:28501 task_flags:0x400000 flags:0x00004000 [Fri Jun 27 15:21:34 2025] Call Trace: [Fri Jun 27 15:21:34 2025] <TASK> [Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930 [Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __mod_timer+0x304/0xa80 [Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180 [Fri Jun 27 15:21:34 2025] schedule_timeout+0xfb/0x230 [Fri Jun 27 15:21:34 2025] ? __pfx_schedule_timeout+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __pfx_process_timeout+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? down_write+0xc4/0x140 [Fri Jun 27 15:21:34 2025] msleep_interruptible+0xbe/0x150 [Fri Jun 27 15:21:34 2025] read_dummy_rwsem_write+0x54/0x90 [Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0 [Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410 [Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50 [Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0 [Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0 [Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0 [Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e [Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f8f288efb40 [Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffffb631038 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f8f288efb40 [Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 000000002a4b5000 RDI: 0000000000000003 [Fri Jun 27 15:21:34 2025] RBP: 000000002a4b5000 R08: 0000000000000000 R09: 0000000000010fff [Fri Jun 27 15:21:34 2025] R10: 00007ffffb630460 R11: 0000000000000246 R12: 000000002a4b5000 [Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [Fri Jun 27 15:21:34 2025] </TASK> This patch (of 3): In preparation for extending blocker tracking to support rwsems, make the rwsem_owner() and is_rwsem_reader_owned() helpers globally available for determining if the blocker is a writer or one of the readers. Additionally, a stale owner pointer in a reader-owned rwsem can lead to false positives in blocker tracking when CONFIG_DETECT_HUNG_TASK_BLOCKER is enabled. To mitigate this, clear the owner field on the reader unlock path, similar to what CONFIG_DEBUG_RWSEMS does. A NULL owner is better than a stale one for diagnostics. Link: https://lkml.kernel.org/r/20250627072924.36567-1-lance.yang@linux.dev Link: https://lkml.kernel.org/r/20250627072924.36567-2-lance.yang@linux.dev Link: https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com/ [1] Signed-off-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Anna Schumaker <anna.schumaker@oracle.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Granados <joel.granados@kernel.org> Cc: John Stultz <jstultz@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Mingzhe Yang <mingzhe.yang@ly.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Yongliang Gao <leonylgao@tencent.com> Cc: Zi Li <zi.li@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Inspired by mutex blocker tracking[1], and having already extended it to semaphores, let's now add support for reader-writer semaphores (rwsems). The approach is simple: when a task enters TASK_UNINTERRUPTIBLE while waiting for an rwsem, we just call hung_task_set_blocker(). The hung task detector can then query the rwsem's owner to identify the lock holder. Tracking works reliably for writers, as there can only be a single writer holding the lock, and its task struct is stored in the owner field. The main challenge lies with readers. The owner field points to only one of many concurrent readers, so we might lose track of the blocker if that specific reader unlocks, even while others remain. This is not a significant issue, however. In practice, long-lasting lock contention is almost always caused by a writer. Therefore, reliably tracking the writer is the primary goal of this patch series ;) With this change, the hung task detector can now show blocker task's info like below: [Fri Jun 27 15:21:34 2025] INFO: task cat:28631 blocked for more than 122 seconds. [Fri Jun 27 15:21:34 2025] Tainted: G S 6.16.0-rc3 #8 [Fri Jun 27 15:21:34 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [Fri Jun 27 15:21:34 2025] task:cat state:D stack:0 pid:28631 tgid:28631 ppid:28501 task_flags:0x400000 flags:0x00004000 [Fri Jun 27 15:21:34 2025] Call Trace: [Fri Jun 27 15:21:34 2025] <TASK> [Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930 [Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? policy_nodemask+0x215/0x340 [Fri Jun 27 15:21:34 2025] ? _raw_spin_lock_irq+0x8a/0xe0 [Fri Jun 27 15:21:34 2025] ? __pfx__raw_spin_lock_irq+0x10/0x10 [Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180 [Fri Jun 27 15:21:34 2025] schedule_preempt_disabled+0x15/0x30 [Fri Jun 27 15:21:34 2025] rwsem_down_read_slowpath+0x55e/0xe10 [Fri Jun 27 15:21:34 2025] ? __pfx_rwsem_down_read_slowpath+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __pfx___might_resched+0x10/0x10 [Fri Jun 27 15:21:34 2025] down_read+0xc9/0x230 [Fri Jun 27 15:21:34 2025] ? __pfx_down_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __debugfs_file_get+0x14d/0x700 [Fri Jun 27 15:21:34 2025] ? __pfx___debugfs_file_get+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? handle_pte_fault+0x52a/0x710 [Fri Jun 27 15:21:34 2025] ? selinux_file_permission+0x3a9/0x590 [Fri Jun 27 15:21:34 2025] read_dummy_rwsem_read+0x4a/0x90 [Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0 [Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410 [Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50 [Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0 [Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0 [Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0 [Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e [Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f3f8faefb40 [Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffdeda5ab98 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f3f8faefb40 [Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 00000000010fa000 RDI: 0000000000000003 [Fri Jun 27 15:21:34 2025] RBP: 00000000010fa000 R08: 0000000000000000 R09: 0000000000010fff [Fri Jun 27 15:21:34 2025] R10: 00007ffdeda59fe0 R11: 0000000000000246 R12: 00000000010fa000 [Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [Fri Jun 27 15:21:34 2025] </TASK> [Fri Jun 27 15:21:34 2025] INFO: task cat:28631 <reader> blocked on an rw-semaphore likely owned by task cat:28630 <writer> [Fri Jun 27 15:21:34 2025] task:cat state:S stack:0 pid:28630 tgid:28630 ppid:28501 task_flags:0x400000 flags:0x00004000 [Fri Jun 27 15:21:34 2025] Call Trace: [Fri Jun 27 15:21:34 2025] <TASK> [Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930 [Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __mod_timer+0x304/0xa80 [Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180 [Fri Jun 27 15:21:34 2025] schedule_timeout+0xfb/0x230 [Fri Jun 27 15:21:34 2025] ? __pfx_schedule_timeout+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? __pfx_process_timeout+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? down_write+0xc4/0x140 [Fri Jun 27 15:21:34 2025] msleep_interruptible+0xbe/0x150 [Fri Jun 27 15:21:34 2025] read_dummy_rwsem_write+0x54/0x90 [Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0 [Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410 [Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50 [Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0 [Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0 [Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10 [Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0 [Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e [Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f8f288efb40 [Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffffb631038 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f8f288efb40 [Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 000000002a4b5000 RDI: 0000000000000003 [Fri Jun 27 15:21:34 2025] RBP: 000000002a4b5000 R08: 0000000000000000 R09: 0000000000010fff [Fri Jun 27 15:21:34 2025] R10: 00007ffffb630460 R11: 0000000000000246 R12: 000000002a4b5000 [Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [Fri Jun 27 15:21:34 2025] </TASK> [1] https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com/ Link: https://lkml.kernel.org/r/20250627072924.36567-3-lance.yang@linux.dev Signed-off-by: Lance Yang <lance.yang@linux.dev> Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Anna Schumaker <anna.schumaker@oracle.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Granados <joel.granados@kernel.org> Cc: John Stultz <jstultz@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Mingzhe Yang <mingzhe.yang@ly.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Yongliang Gao <leonylgao@tencent.com> Cc: Zi Li <zi.li@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As syzbot [1] reported as below: R10: 0000000000000100 R11: 0000000000000206 R12: 00007ffe17473450 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> ---[ end trace 0000000000000000 ]--- ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 Read of size 8 at addr ffff88812d962278 by task syz-executor/564 CPU: 1 PID: 564 Comm: syz-executor Tainted: G W 6.1.129-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack+0x21/0x24 lib/dump_stack.c:88 dump_stack_lvl+0xee/0x158 lib/dump_stack.c:106 print_address_description+0x71/0x210 mm/kasan/report.c:316 print_report+0x4a/0x60 mm/kasan/report.c:427 kasan_report+0x122/0x150 mm/kasan/report.c:531 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 __list_del_entry include/linux/list.h:134 [inline] list_del_init include/linux/list.h:206 [inline] f2fs_inode_synced+0xf7/0x2e0 fs/f2fs/super.c:1531 f2fs_update_inode+0x74/0x1c40 fs/f2fs/inode.c:585 f2fs_update_inode_page+0x137/0x170 fs/f2fs/inode.c:703 f2fs_write_inode+0x4ec/0x770 fs/f2fs/inode.c:731 write_inode fs/fs-writeback.c:1460 [inline] __writeback_single_inode+0x4a0/0xab0 fs/fs-writeback.c:1677 writeback_single_inode+0x221/0x8b0 fs/fs-writeback.c:1733 sync_inode_metadata+0xb6/0x110 fs/fs-writeback.c:2789 f2fs_sync_inode_meta+0x16d/0x2a0 fs/f2fs/checkpoint.c:1159 block_operations fs/f2fs/checkpoint.c:1269 [inline] f2fs_write_checkpoint+0xca3/0x2100 fs/f2fs/checkpoint.c:1658 kill_f2fs_super+0x231/0x390 fs/f2fs/super.c:4668 deactivate_locked_super+0x98/0x100 fs/super.c:332 deactivate_super+0xaf/0xe0 fs/super.c:363 cleanup_mnt+0x45f/0x4e0 fs/namespace.c:1186 __cleanup_mnt+0x19/0x20 fs/namespace.c:1193 task_work_run+0x1c6/0x230 kernel/task_work.c:203 exit_task_work include/linux/task_work.h:39 [inline] do_exit+0x9fb/0x2410 kernel/exit.c:871 do_group_exit+0x210/0x2d0 kernel/exit.c:1021 __do_sys_exit_group kernel/exit.c:1032 [inline] __se_sys_exit_group kernel/exit.c:1030 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030 x64_sys_call+0x7b4/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 RIP: 0033:0x7f28b1b8e169 Code: Unable to access opcode bytes at 0x7f28b1b8e13f. RSP: 002b:00007ffe174710a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f28b1c10879 RCX: 00007f28b1b8e169 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000002 R08: 00007ffe1746ee47 R09: 00007ffe17472360 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffe17472360 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> Allocated by task 569: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_alloc_info+0x25/0x30 mm/kasan/generic.c:505 __kasan_slab_alloc+0x72/0x80 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook+0x4f/0x2c0 mm/slab.h:737 slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x104/0x220 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3245 [inline] f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419 alloc_inode fs/inode.c:261 [inline] iget_locked+0x186/0x880 fs/inode.c:1373 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483 f2fs_lookup+0x366/0xab0 fs/f2fs/namei.c:487 __lookup_slow+0x2a3/0x3d0 fs/namei.c:1690 lookup_slow+0x57/0x70 fs/namei.c:1707 walk_component+0x2e6/0x410 fs/namei.c:1998 lookup_last fs/namei.c:2455 [inline] path_lookupat+0x180/0x490 fs/namei.c:2479 filename_lookup+0x1f0/0x500 fs/namei.c:2508 vfs_statx+0x10b/0x660 fs/stat.c:229 vfs_fstatat fs/stat.c:267 [inline] vfs_lstat include/linux/fs.h:3424 [inline] __do_sys_newlstat fs/stat.c:423 [inline] __se_sys_newlstat+0xd5/0x350 fs/stat.c:417 __x64_sys_newlstat+0x5b/0x70 fs/stat.c:417 x64_sys_call+0x393/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 Freed by task 13: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_free_info+0x31/0x50 mm/kasan/generic.c:516 ____kasan_slab_free+0x132/0x180 mm/kasan/common.c:236 __kasan_slab_free+0x11/0x20 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0xc2/0x190 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0x12d/0x2a0 mm/slub.c:3683 f2fs_free_inode+0x24/0x30 fs/f2fs/super.c:1562 i_callback+0x4c/0x70 fs/inode.c:250 rcu_do_batch+0x503/0xb80 kernel/rcu/tree.c:2297 rcu_core+0x5a2/0xe70 kernel/rcu/tree.c:2557 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2574 handle_softirqs+0x178/0x500 kernel/softirq.c:578 run_ksoftirqd+0x28/0x30 kernel/softirq.c:945 smpboot_thread_fn+0x45a/0x8c0 kernel/smpboot.c:164 kthread+0x270/0x310 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Last potentially related work creation: kasan_save_stack+0x3a/0x60 mm/kasan/common.c:45 __kasan_record_aux_stack+0xb6/0xc0 mm/kasan/generic.c:486 kasan_record_aux_stack_noalloc+0xb/0x10 mm/kasan/generic.c:496 call_rcu+0xd4/0xf70 kernel/rcu/tree.c:2845 destroy_inode fs/inode.c:316 [inline] evict+0x7da/0x870 fs/inode.c:720 iput_final fs/inode.c:1834 [inline] iput+0x62b/0x830 fs/inode.c:1860 do_unlinkat+0x356/0x540 fs/namei.c:4397 __do_sys_unlink fs/namei.c:4438 [inline] __se_sys_unlink fs/namei.c:4436 [inline] __x64_sys_unlink+0x49/0x50 fs/namei.c:4436 x64_sys_call+0x958/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:88 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 The buggy address belongs to the object at ffff88812d961f20 which belongs to the cache f2fs_inode_cache of size 1200 The buggy address is located 856 bytes inside of 1200-byte region [ffff88812d961f20, ffff88812d9623d0) The buggy address belongs to the physical page: page:ffffea0004b65800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12d960 head:ffffea0004b65800 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 0000000000000000 dead000000000122 ffff88810a94c500 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Reclaimable, gfp_mask 0x1d2050(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_RECLAIMABLE), pid 569, tgid 568 (syz.2.16), ts 55943246141, free_ts 0 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1d0/0x1f0 mm/page_alloc.c:2532 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x2e63/0x2ef0 mm/page_alloc.c:4328 __alloc_pages+0x235/0x4b0 mm/page_alloc.c:5605 alloc_slab_page include/linux/gfp.h:-1 [inline] allocate_slab mm/slub.c:1939 [inline] new_slab+0xec/0x4b0 mm/slub.c:1992 ___slab_alloc+0x6f6/0xb50 mm/slub.c:3180 __slab_alloc+0x5e/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x13f/0x220 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3245 [inline] f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419 alloc_inode fs/inode.c:261 [inline] iget_locked+0x186/0x880 fs/inode.c:1373 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483 f2fs_fill_super+0x3ad7/0x6bb0 fs/f2fs/super.c:4293 mount_bdev+0x2ae/0x3e0 fs/super.c:1443 f2fs_mount+0x34/0x40 fs/f2fs/super.c:4642 legacy_get_tree+0xea/0x190 fs/fs_context.c:632 vfs_get_tree+0x89/0x260 fs/super.c:1573 do_new_mount+0x25a/0xa20 fs/namespace.c:3056 page_owner free stack trace missing Memory state around the buggy address: ffff88812d962100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812d962180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88812d962200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88812d962280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812d962300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1] https://syzkaller.appspot.com/x/report.txt?x=13448368580000 This bug can be reproduced w/ the reproducer [2], once we enable CONFIG_F2FS_CHECK_FS config, the reproducer will trigger panic as below, so the direct reason of this bug is the same as the one below patch [3] fixed. kernel BUG at fs/f2fs/inode.c:857! RIP: 0010:f2fs_evict_inode+0x1204/0x1a20 Call Trace: <TASK> evict+0x32a/0x7a0 do_unlinkat+0x37b/0x5b0 __x64_sys_unlink+0xad/0x100 do_syscall_64+0x5a/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0010:f2fs_evict_inode+0x1204/0x1a20 [2] https://syzkaller.appspot.com/x/repro.c?x=17495ccc580000 [3] https://lore.kernel.org/linux-f2fs-devel/20250702120321.1080759-1-chao@kernel.org Tracepoints before panic: f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file1 f2fs_unlink_exit: dev = (7,0), ino = 7, ret = 0 f2fs_evict_inode: dev = (7,0), ino = 7, pino = 3, i_mode = 0x81ed, i_size = 10, i_nlink = 0, i_blocks = 0, i_advise = 0x0 f2fs_truncate_node: dev = (7,0), ino = 7, nid = 8, block_address = 0x3c05 f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file3 f2fs_unlink_exit: dev = (7,0), ino = 8, ret = 0 f2fs_evict_inode: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 9000, i_nlink = 0, i_blocks = 24, i_advise = 0x4 f2fs_truncate: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 0, i_nlink = 0, i_blocks = 24, i_advise = 0x4 f2fs_truncate_blocks_enter: dev = (7,0), ino = 8, i_size = 0, i_blocks = 24, start file offset = 0 f2fs_truncate_blocks_exit: dev = (7,0), ino = 8, ret = -2 The root cause is: in the fuzzed image, dnode #8 belongs to inode #7, after inode #7 eviction, dnode #8 was dropped. However there is dirent that has ino #8, so, once we unlink file3, in f2fs_evict_inode(), both f2fs_truncate() and f2fs_update_inode_page() will fail due to we can not load node #8, result in we missed to call f2fs_inode_synced() to clear inode dirty status. Let's fix this by calling f2fs_inode_synced() in error path of f2fs_evict_inode(). PS: As I verified, the reproducer [2] can trigger this bug in v6.1.129, but it failed in v6.16-rc4, this is because the testcase will stop due to other corruption has been detected by f2fs: F2FS-fs (loop0): inconsistent node block, node_type:2, nid:8, node_footer[nid:8,ino:8,ofs:0,cpver:5013063228981249506,blkaddr:15366] F2FS-fs (loop0): f2fs_lookup: inode (ino=9) has zero i_nlink Fixes: 0f18b46 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/x/report.txt?x=13448368580000 Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Ido Schimmel says: ==================== ipv4: icmp: Fix source IP derivation in presence of VRFs Align IPv4 with IPv6 and in the presence of VRFs generate ICMP error messages with a source IP that is derived from the receiving interface and not from its VRF master. This is especially important when the error messages are "Time Exceeded" messages as it means that utilities like traceroute will show an incorrect packet path. Patches #1-#2 are preparations. Patch #3 is the actual change. Patches #4-#7 make small improvements in the existing traceroute test. Patch #8 extends the traceroute test with VRF test cases for both IPv4 and IPv6. Changes since v1 [1]: * Rebase. [1] https://lore.kernel.org/netdev/20250901083027.183468-1-idosch@nvidia.com/ ==================== Link: https://patch.msgid.link/20250908073238.119240-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says: ==================== bridge: Allow keeping local FDB entries only on VLAN 0 The bridge FDB contains one local entry per port per VLAN, for the MAC of the port in question, and likewise for the bridge itself. This allows bridge to locally receive and punt "up" any packets whose destination MAC address matches that of one of the bridge interfaces or of the bridge itself. The number of these local "service" FDB entries grows linearly with number of bridge-global VLAN memberships, but that in turn will tend to grow quadratically with number of ports and per-port VLAN memberships. While that does not cause issues during forwarding lookups, it does make dumps impractically slow. As an example, with 100 interfaces, each on 4K VLANs, a full dump of FDB that just contains these 400K local entries, takes 6.5s. That's _without_ considering iproute2 formatting overhead, this is just how long it takes to walk the FDB (repeatedly), serialize it into netlink messages, and parse the messages back in userspace. This is to illustrate that with growing number of ports and VLANs, the time required to dump this repetitive information blows up. Arguably 4K VLANs per interface is not a very realistic configuration, but then modern switches can instead have several hundred interfaces, and we have fielded requests for >1K VLAN memberships per port among customers. FDB entries are currently all kept on a single linked list, and then dumping uses this linked list to walk all entries and dump them in order. When the message buffer is full, the iteration is cut short, and later restarted. Of course, to restart the iteration, it's first necessary to walk the already-dumped front part of the list before starting dumping again. So one possibility is to organize the FDB entries in different structure more amenable to walk restarts. One option is to walk directly the hash table. The advantage is that no auxiliary structure needs to be introduced. With a rough sketch of this approach, the above scenario gets dumped in not quite 3 s, saving over 50 % of time. However hash table iteration requires maintaining an active cursor that must be collected when the dump is aborted. It looks like that would require changes in the NDO protocol to allow to run this cleanup. Moreover, on hash table resize the iteration is simply restarted. FDB dumps are currently not guaranteed to correspond to any one particular state: entries can be missed, or be duplicated. But with hash table iteration we would get that plus the much less graceful resize behavior, where swaths of FDB are duplicated. Another option is to maintain the FDB entries in a red-black tree. We have a PoC of this approach on hand, and the above scenario is dumped in about 2.5 s. Still not as snappy as we'd like it, but better than the hash table. However the savings come at the expense of a more expensive insertion, and require locking during dumps, which blocks insertion. The upside of these approaches is that they provide benefits whatever the FDB contents. But it does not seem like either of these is workable. However we intend to clean up the RB tree PoC and present it for consideration later on in case the trade-offs are considered acceptable. Yet another option might be to use in-kernel FDB filtering, and to filter the local entries when dumping. Unfortunately, this does not help all that much either, because the linked-list walk still needs to happen. Also, with the obvious filtering interface built around ndm_flags / ndm_state filtering, one can't just exclude pure local entries in one query. One needs to dump all non-local entries first, and then to get permanent entries in another run filter local & added_by_user. I.e. one needs to pay the iteration overhead twice, and then integrate the result in userspace. To get significant savings, one would need a very specific knob like "dump, but skip/only include local entries". But if we are adding a local-specific knobs, maybe let's have an option to just not duplicate them in the first place. All this FDB duplication is there merely to make things snappy during forwarding. But high-radix switches with thousands of VLANs typically do not process much traffic in the SW datapath at all, but rather offload vast majority of it. So we could exchange some of the runtime performance for a neater FDB. To that end, in this patchset, introduce a new bridge option, BR_BOOLOPT_FDB_LOCAL_VLAN_0, which when enabled, has local FDB entries installed only on VLAN 0, instead of duplicating them across all VLANs. Then to maintain the local termination behavior, on FDB miss, the bridge does a second lookup on VLAN 0. Enabling this option changes the bridge behavior in expected ways. Since the entries are only kept on VLAN 0, FDB get, flush and dump will not perceive them on non-0 VLANs. And deleting the VLAN 0 entry affects forwarding on all VLANs. This patchset is loosely based on a privately circulated patch by Nikolay Aleksandrov. The patchset progresses as follows: - Patch #1 introduces a bridge option to enable the above feature. Then patches #2 to #5 gradually patch the bridge to do the right thing when the option is enabled. Finally patch #6 adds the UAPI knob and the code for when the feature is enabled or disabled. - Patches #7, #8 and #9 contain fixes and improvements to selftest libraries - Patch #10 contains a new selftest ==================== Link: https://patch.msgid.link/cover.1757004393.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== selftests: Mark auto-deferring functions clearly selftests/net/lib.sh contains a suite of iproute2 wrappers that automatically schedule the corresponding cleanup through defer. The fact they do so is however not immediately obvious, one needs to know which functions are handling the deferral behind the scenes, and which expect the caller to handle cleanups themselves. A convention for these auto-deferring functions would help both writing and patch review. This patchset does so by marking these functions with an adf_ prefix. We already have a few such functions: forwarding/lib.sh has adf_mcd_start() and a few selftests add private helpers that conform to this convention. Patches #1 to #8 gradually convert individual functions, one per patch. Patch #9 renames an auto-deferring private helpers named dfr_* to adf_*. The plan is not to retro-rename all private helpers, but I happened to know about this one. Patches #10 to #12 introduce several autodefer helpers for commonly used forwarding/lib.sh functions, and opportunistically convert straightforward instances of 'action; defer counteraction' to the new helpers. Patch #13 adds some README verbiage to pitch defer and the adf_* convention. ==================== Link: https://patch.msgid.link/cover.1758821127.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Before disabling SR-IOV via config space accesses to the parent PF, sriov_disable() first removes the PCI devices representing the VFs. Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()") such removal operations are serialized against concurrent remove and rescan using the pci_rescan_remove_lock. No such locking was ever added in sriov_disable() however. In particular when commit 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device removal into sriov_del_vfs() there was still no locking around the pci_iov_remove_virtfn() calls. On s390 the lack of serialization in sriov_disable() may cause double remove and list corruption with the below (amended) trace being observed: PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56) GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001 00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480 0000000000000001 0000000000000000 0000000000000000 0000000180692828 00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8 #0 [3800313fb20] device_del at c9158ad5c #1 [3800313fb88] pci_remove_bus_device at c915105ba #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198 #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0 #4 [3800313fc60] zpci_bus_remove_device at c90fb6104 #5 [3800313fca0] __zpci_event_availability at c90fb3dca #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2 #7 [3800313fd60] crw_collect_info at c91905822 #8 [3800313fe10] kthread at c90feb390 #9 [3800313fe68] __ret_from_fork at c90f6aa64 #10 [3800313fe98] ret_from_fork at c9194f3f2. This is because in addition to sriov_disable() removing the VFs, the platform also generates hot-unplug events for the VFs. This being the reverse operation to the hotplug events generated by sriov_enable() and handled via pdev->no_vf_scan. And while the event processing takes pci_rescan_remove_lock and checks whether the struct pci_dev still exists, the lack of synchronization makes this checking racy. Other races may also be possible of course though given that this lack of locking persisted so long observable races seem very rare. Even on s390 the list corruption was only observed with certain devices since the platform events are only triggered by config accesses after the removal, so as long as the removal finished synchronously they would not race. Either way the locking is missing so fix this by adding it to the sriov_del_vfs() helper. Just like PCI rescan-remove, locking is also missing in sriov_add_vfs() including for the error case where pci_stop_and_remove_bus_device() is called without the PCI rescan-remove lock being held. Even in the non-error case, adding new PCI devices and buses should be serialized via the PCI rescan-remove lock. Add the necessary locking. Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Julian Ruess <julianr@linux.ibm.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com

The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 #6 0x565358f6682e in run_test_child builtin-test.c:344 #7 0x565358ef7121 in start_command run-command.c:128 #8 0x565358f67273 in start_test builtin-test.c:545 #9 0x565358f6771d in __cmd_test builtin-test.c:647 #10 0x565358f682bd in cmd_test builtin-test.c:849 #11 0x565358ee5ded in run_builtin perf.c:349 #12 0x565358ee6085 in handle_internal_command perf.c:401 #13 0x565358ee61de in run_argv perf.c:448 #14 0x565358ee6527 in main perf.c:555 #15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 #16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 #17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.ibm.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Marc Kleine-Budde <mkl@pengutronix.de> says: Similarly to how CAN FD reuses the bittiming logic of Classical CAN, CAN XL also reuses the entirety of CAN FD features, and, on top of that, adds new features which are specific to CAN XL. A so-called 'mixed-mode' is intended to have (XL-tolerant) CAN FD nodes and CAN XL nodes on one CAN segment, where the FD-controllers can talk CC/FD and the XL-controllers can talk CC/FD/XL. This mixed-mode utilizes the known error-signalling (ES) for sending CC/FD/XL frames. For CAN FD and CAN XL the tranceiver delay compensation (TDC) is supported to use common CAN and CAN-SIG transceivers. The CANXL-only mode disables the error-signalling in the CAN XL controller. This mode does not allow CC/FD frames to be sent but additionally offers a CAN XL transceiver mode switching (TMS) to send CAN XL frames with up to 20Mbit/s data rate. The TMS utilizes a PWM configuration which is added to the netlink interface. Configured with CAN_CTRLMODE_FD and CAN_CTRLMODE_XL this leads to: FD=0 XL=0 CC-only mode (ES=1) FD=1 XL=0 FD/CC mixed-mode (ES=1) FD=1 XL=1 XL/FD/CC mixed-mode (ES=1) FD=0 XL=1 XL-only mode (ES=0, TMS optional) Patch #1 print defined ctrlmode strings capitalized to increase the readability and to be in line with the 'ip' tool (iproute2). Patch #2 is a small clean-up which makes can_calc_bittiming() use NL_SET_ERR_MSG() instead of netdev_err(). Patch #3 adds a check in can_dev_dropped_skb() to drop CAN FD frames when CAN FD is turned off. Patch #4 adds CAN_CTRLMODE_RESTRICTED. Note that contrary to the other CAN_CTRL_MODE_XL_* that are introduced in the later patches, this control mode is not specific to CAN XL. The nuance is that because this restricted mode was only added in ISO 11898-1:2024, it is made mandatory for CAN XL devices but optional for other protocols. This is why this patch is added as a preparation before introducing the core CAN XL logic. Patch #5 adds all the CAN XL features which are inherited from CAN FD: the nominal bittiming, the data bittiming and the TDC. Patch #6 add a new CAN_CTRLMODE_XL_TMS control mode which is specific to CAN XL to enable the transceiver mode switching (TMS) in XL-only mode. Patch #7 adds a check in can_dev_dropped_skb() to drop CAN CC/FD frames when the CAN XL controller is in CAN XL-only mode. The introduced can_dev_in_xl_only_mode() function also determines the error-signalling configuration for the CAN XL controllers. Patch #8 to #11 add the PWM logic for the CAN XL TMS mode. Patch #12 to #14 add different default sample-points for standard CAN and CAN SIG transceivers (with TDC) and CAN XL transceivers using PWM in the CAN XL TMS mode. Patch #15 add a dummy_can driver for netlink testing and debugging. Patch #16 check CAN frame type (CC/FD/XL) when writing those frames to the CAN_RAW socket and reject them if it's not supported by the CAN interface. Patch #17 increase the resolution when printing the bitrate error and round-up the value to 0.01% in the case the resolution would still provide values which would lead to 0.00%. Link: https://patch.msgid.link/20251126-canxl-v8-0-e7e3eb74f889@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

[WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 621e55f) Cc: stable@vger.kernel.org

mswiatko and others added 4 commits September 15, 2021 01:07

net: include xdp generic metadata definition

4c94dec

Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

ice: use xdp generic metadata

58360b9

As starting point add vlan id and rss hash if xdp metadata is supported. Add xd_metadata_support field in VSI to allow easy passing this value to ring configuration. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

samples: bpf: add simple sample with CORE

a3c6297

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>

mswiatko closed this Sep 24, 2021

mswiatko deleted the generic-metadata-sample-core branch September 24, 2021 06:30

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Generic metadata sample core #8

Generic metadata sample core #8

Uh oh!

mswiatko commented Sep 16, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Generic metadata sample core #8

Generic metadata sample core #8

Uh oh!

Conversation

mswiatko commented Sep 16, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants