Skip to content

Conversation

@potiuk
Copy link
Member

@potiuk potiuk commented Aug 15, 2024

Pytest has a weird behaviour that it will not collect tests from parent folder when subfolder of it is specified after the parent folder. This caused some non-db tests from providers folder have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605


^ Add meaningful description above
Read the Pull Request Guidelines for more information.
In case of fundamental code changes, an Airflow Improvement Proposal (AIP) is needed.
In case of a new dependency, check compliance with the ASF 3rd Party License Policy.
In case of backwards incompatible changes please leave a note in a newsfragment file, named {pr_number}.significant.rst or {issue_number}.significant.rst, in newsfragments.

potiuk added a commit to potiuk/airflow that referenced this pull request Aug 15, 2024
This test missed the mark and it has not been detected because of
a bugggy pytest behaviour pytest-dev/pytest#12605
that we had to workaround in apache#41499
@potiuk potiuk force-pushed the fix-non-db-test-types-calculation branch from 137ebe8 to 6ba8cb1 Compare August 15, 2024 12:25
@potiuk potiuk requested a review from kaxil August 15, 2024 12:43
@potiuk
Copy link
Member Author

potiuk commented Aug 15, 2024

Ok. Now we correctly fail Non-DB tests for spark kubernetes in "main" build - this will be fixed after #41500 is merged.

vincbeck pushed a commit that referenced this pull request Aug 15, 2024
This test missed the mark and it has not been detected because of
a bugggy pytest behaviour pytest-dev/pytest#12605
that we had to workaround in #41499
Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605
@potiuk potiuk force-pushed the fix-non-db-test-types-calculation branch from 6ba8cb1 to 4b3c953 Compare August 15, 2024 14:06
@potiuk potiuk merged commit d489826 into apache:main Aug 15, 2024
@potiuk potiuk deleted the fix-non-db-test-types-calculation branch August 15, 2024 14:50
potiuk added a commit to potiuk/airflow that referenced this pull request Aug 16, 2024
Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605

(cherry picked from commit d489826)
potiuk added a commit that referenced this pull request Aug 16, 2024
Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605

(cherry picked from commit d489826)
Artuz37 pushed a commit to Artuz37/airflow that referenced this pull request Aug 19, 2024
This test missed the mark and it has not been detected because of
a bugggy pytest behaviour pytest-dev/pytest#12605
that we had to workaround in apache#41499
Artuz37 pushed a commit to Artuz37/airflow that referenced this pull request Aug 19, 2024
Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605
romsharon98 pushed a commit to romsharon98/airflow that referenced this pull request Aug 20, 2024
This test missed the mark and it has not been detected because of
a bugggy pytest behaviour pytest-dev/pytest#12605
that we had to workaround in apache#41499
romsharon98 pushed a commit to romsharon98/airflow that referenced this pull request Aug 20, 2024
Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605
utkarsharma2 added a commit that referenced this pull request Aug 22, 2024
…41610)

* Enable pull requests to be run from v*test branches (#41474) (#41476)

Since we switch from direct push of cherry-picking to open PRs
against v*test branch, we should enable PRs to run for the target
branch.

(cherry picked from commit a9363e6)

* Prevent provider lowest-dependency tests to run in non-main branch (#41478) (#41481)

When running tests in v2-10-test branch, lowest depenency tests
are run for providers - because when calculating separate tests,
the "skip_provider_tests" has not been used to filter them out.

This PR fixes it.

(cherry picked from commit 75da507)

* Make PROD image building works in non-main PRs (#41480) (#41484)

The PROD image building fails currently in non-main because it
attempts to build source provider packages rather than use them from
PyPi when PR is run against "v-test" branch.

This PR fixes it:

* PROD images in non-main-targetted build will pull providers from
  PyPI rather than build them
* they use PyPI constraints to install the providers
* they use UV - which should speed up building of the images

(cherry picked from commit 4d5f1c4)

* Add WebEncoder for trigger page rendering to avoid render failure (#41350) (#41485)

Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>

* Incorrect try number subtraction producing invalid span id for OTEL airflow (issue #41501) (#41502) (#41535)

* Fix for issue #39336

* removed unnecessary import

(cherry picked from commit dd3c3a7)

Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>

* Fix failing pydantic v1 tests (#41534) (#41541)

We need to exclude some versions of Pydantic v1 because it conflicts
with aws provider.

(cherry picked from commit a033c5f)

* Fix Non-DB test calculation for main builds (#41499) (#41543)

Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605

(cherry picked from commit d489826)

* Add changelog for airflow python client 2.10.0 (#41583) (#41584)

* Add changelog for airflow python client 2.10.0

* Update client version

(cherry picked from commit 317a28e)

* Make all test pass in Database Isolation mode (#41567)

This adds dedicated "DatabaseIsolation" test to airflow v2-10-test
branch..

The DatabaseIsolation test will run all "db-tests" with enabled
DB isolation mode and running `internal-api` component - groups
of tests marked with "skip-if-database-isolation" will be skipped.

* Upgrade build and chart dependencies (#41570) (#41588)

(cherry picked from commit c88192c)

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>

* Limit watchtower as depenendcy as 3.3.0 breaks moin. (#41612)

(cherry picked from commit 1b602d5)

* Enable running Pull Requests against v2-10-stable branch (#41624)

(cherry picked from commit e306e7f)

* Fix tests/models/test_variable.py for database isolation mode (#41414)

* Fix tests/models/test_variable.py for database isolation mode

* Review feedback

(cherry picked from commit 736ebfe)

* Make latest botocore tests green (#41626)

The latest botocore tests are conflicting with a few requirements
and until apache-beam upcoming version is released we need to do
some manual exclusions. Those exclusions should make latest botocore
test green again.

(cherry picked from commit a13ccbb)

* Simpler task retrieval for taskinstance test (#41389)

The test has been updated for DB isolation but the retrieval of
task was not intuitive and it could lead to flaky tests possibly

(cherry picked from commit f25adf1)

* Skip  database isolation case for task mapping taskinstance tests (#41471)

Related: #41067
(cherry picked from commit 7718bd7)

* Skipping tests for db isolation because similar tests were skipped (#41450)

(cherry picked from commit e94b508)

---------

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>
Co-authored-by: Brent Bovenzi <brent@astronomer.io>
Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>
Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>
Co-authored-by: Jens Scheffler <95105677+jscheffl@users.noreply.github.com>
Co-authored-by: Bugra Ozturk <bugraoz93@users.noreply.github.com>
@utkarsharma2 utkarsharma2 added the changelog:skip Changes that should be skipped from the changelog (CI, tests, etc..) label Aug 30, 2024
@utkarsharma2 utkarsharma2 added this to the Airflow 2.10.1 milestone Aug 30, 2024
utkarsharma2 added a commit that referenced this pull request Aug 30, 2024
…41610)

* Enable pull requests to be run from v*test branches (#41474) (#41476)

Since we switch from direct push of cherry-picking to open PRs
against v*test branch, we should enable PRs to run for the target
branch.

(cherry picked from commit a9363e6)

* Prevent provider lowest-dependency tests to run in non-main branch (#41478) (#41481)

When running tests in v2-10-test branch, lowest depenency tests
are run for providers - because when calculating separate tests,
the "skip_provider_tests" has not been used to filter them out.

This PR fixes it.

(cherry picked from commit 75da507)

* Make PROD image building works in non-main PRs (#41480) (#41484)

The PROD image building fails currently in non-main because it
attempts to build source provider packages rather than use them from
PyPi when PR is run against "v-test" branch.

This PR fixes it:

* PROD images in non-main-targetted build will pull providers from
  PyPI rather than build them
* they use PyPI constraints to install the providers
* they use UV - which should speed up building of the images

(cherry picked from commit 4d5f1c4)

* Add WebEncoder for trigger page rendering to avoid render failure (#41350) (#41485)

Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>

* Incorrect try number subtraction producing invalid span id for OTEL airflow (issue #41501) (#41502) (#41535)

* Fix for issue #39336

* removed unnecessary import

(cherry picked from commit dd3c3a7)

Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>

* Fix failing pydantic v1 tests (#41534) (#41541)

We need to exclude some versions of Pydantic v1 because it conflicts
with aws provider.

(cherry picked from commit a033c5f)

* Fix Non-DB test calculation for main builds (#41499) (#41543)

Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605

(cherry picked from commit d489826)

* Add changelog for airflow python client 2.10.0 (#41583) (#41584)

* Add changelog for airflow python client 2.10.0

* Update client version

(cherry picked from commit 317a28e)

* Make all test pass in Database Isolation mode (#41567)

This adds dedicated "DatabaseIsolation" test to airflow v2-10-test
branch..

The DatabaseIsolation test will run all "db-tests" with enabled
DB isolation mode and running `internal-api` component - groups
of tests marked with "skip-if-database-isolation" will be skipped.

* Upgrade build and chart dependencies (#41570) (#41588)

(cherry picked from commit c88192c)

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>

* Limit watchtower as depenendcy as 3.3.0 breaks moin. (#41612)

(cherry picked from commit 1b602d5)

* Enable running Pull Requests against v2-10-stable branch (#41624)

(cherry picked from commit e306e7f)

* Fix tests/models/test_variable.py for database isolation mode (#41414)

* Fix tests/models/test_variable.py for database isolation mode

* Review feedback

(cherry picked from commit 736ebfe)

* Make latest botocore tests green (#41626)

The latest botocore tests are conflicting with a few requirements
and until apache-beam upcoming version is released we need to do
some manual exclusions. Those exclusions should make latest botocore
test green again.

(cherry picked from commit a13ccbb)

* Simpler task retrieval for taskinstance test (#41389)

The test has been updated for DB isolation but the retrieval of
task was not intuitive and it could lead to flaky tests possibly

(cherry picked from commit f25adf1)

* Skip  database isolation case for task mapping taskinstance tests (#41471)

Related: #41067
(cherry picked from commit 7718bd7)

* Skipping tests for db isolation because similar tests were skipped (#41450)

(cherry picked from commit e94b508)

---------

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>
Co-authored-by: Brent Bovenzi <brent@astronomer.io>
Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>
Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>
Co-authored-by: Jens Scheffler <95105677+jscheffl@users.noreply.github.com>
Co-authored-by: Bugra Ozturk <bugraoz93@users.noreply.github.com>
utkarsharma2 added a commit that referenced this pull request Aug 30, 2024
…41610)

* Enable pull requests to be run from v*test branches (#41474) (#41476)

Since we switch from direct push of cherry-picking to open PRs
against v*test branch, we should enable PRs to run for the target
branch.

(cherry picked from commit a9363e6)

* Prevent provider lowest-dependency tests to run in non-main branch (#41478) (#41481)

When running tests in v2-10-test branch, lowest depenency tests
are run for providers - because when calculating separate tests,
the "skip_provider_tests" has not been used to filter them out.

This PR fixes it.

(cherry picked from commit 75da507)

* Make PROD image building works in non-main PRs (#41480) (#41484)

The PROD image building fails currently in non-main because it
attempts to build source provider packages rather than use them from
PyPi when PR is run against "v-test" branch.

This PR fixes it:

* PROD images in non-main-targetted build will pull providers from
  PyPI rather than build them
* they use PyPI constraints to install the providers
* they use UV - which should speed up building of the images

(cherry picked from commit 4d5f1c4)

* Add WebEncoder for trigger page rendering to avoid render failure (#41350) (#41485)

Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>

* Incorrect try number subtraction producing invalid span id for OTEL airflow (issue #41501) (#41502) (#41535)

* Fix for issue #39336

* removed unnecessary import

(cherry picked from commit dd3c3a7)

Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>

* Fix failing pydantic v1 tests (#41534) (#41541)

We need to exclude some versions of Pydantic v1 because it conflicts
with aws provider.

(cherry picked from commit a033c5f)

* Fix Non-DB test calculation for main builds (#41499) (#41543)

Pytest has a weird behaviour that it will not collect tests
from parent folder when subfolder of it is specified after the
parent folder. This caused some non-db tests from providers folder
have been skipped during main build.

The issue in Pytest 8.2 (used to work before) is tracked at
pytest-dev/pytest#12605

(cherry picked from commit d489826)

* Add changelog for airflow python client 2.10.0 (#41583) (#41584)

* Add changelog for airflow python client 2.10.0

* Update client version

(cherry picked from commit 317a28e)

* Make all test pass in Database Isolation mode (#41567)

This adds dedicated "DatabaseIsolation" test to airflow v2-10-test
branch..

The DatabaseIsolation test will run all "db-tests" with enabled
DB isolation mode and running `internal-api` component - groups
of tests marked with "skip-if-database-isolation" will be skipped.

* Upgrade build and chart dependencies (#41570) (#41588)

(cherry picked from commit c88192c)

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>

* Limit watchtower as depenendcy as 3.3.0 breaks moin. (#41612)

(cherry picked from commit 1b602d5)

* Enable running Pull Requests against v2-10-stable branch (#41624)

(cherry picked from commit e306e7f)

* Fix tests/models/test_variable.py for database isolation mode (#41414)

* Fix tests/models/test_variable.py for database isolation mode

* Review feedback

(cherry picked from commit 736ebfe)

* Make latest botocore tests green (#41626)

The latest botocore tests are conflicting with a few requirements
and until apache-beam upcoming version is released we need to do
some manual exclusions. Those exclusions should make latest botocore
test green again.

(cherry picked from commit a13ccbb)

* Simpler task retrieval for taskinstance test (#41389)

The test has been updated for DB isolation but the retrieval of
task was not intuitive and it could lead to flaky tests possibly

(cherry picked from commit f25adf1)

* Skip  database isolation case for task mapping taskinstance tests (#41471)

Related: #41067
(cherry picked from commit 7718bd7)

* Skipping tests for db isolation because similar tests were skipped (#41450)

(cherry picked from commit e94b508)

---------

Co-authored-by: Jarek Potiuk <jarek@potiuk.com>
Co-authored-by: Brent Bovenzi <brent@astronomer.io>
Co-authored-by: M. Olcay Tercanlı <muhammed_tercanli@epam.com>
Co-authored-by: Howard Yoo <32691630+howardyoo@users.noreply.github.com>
Co-authored-by: Jens Scheffler <95105677+jscheffl@users.noreply.github.com>
Co-authored-by: Bugra Ozturk <bugraoz93@users.noreply.github.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

area:dev-tools changelog:skip Changes that should be skipped from the changelog (CI, tests, etc..)

Projects

None yet

Development

Successfully merging this pull request may close these issues.

4 participants