config: first attempt to enable jh7100 #2
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Owner
Author
|
@esmil booting successfully after replacing the kernel in fedora rootfs and the eth0 is working fine without link down. |
Closed
esmil
force-pushed
the
starlight
branch
2 times, most recently
from
060f811 to
5ef2cd6
Compare
[ Upstream commit ee6ddf5 ] Running an rcuscale stress-suite can lead to "Out of memory" of a system. This can happen under high memory pressure with a small amount of physical memory. For example, a KVM test configuration with 64 CPUs and 512 megabytes can result in OOM when running rcuscale with below parameters: ../kvm.sh --torture rcuscale --allcpus --duration 10 --kconfig CONFIG_NR_CPUS=64 \ --bootargs "rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 rcuscale.holdoff=20 \ rcuscale.kfree_loops=10000 torture.disable_onoff_at_boot" --trust-make <snip> [ 12.054448] kworker/1:1H invoked oom-killer: gfp_mask=0x2cc0(GFP_KERNEL|__GFP_NOWARN), order=0, oom_score_adj=0 [ 12.055303] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ torvalds#510 [ 12.055416] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014 [ 12.056485] Workqueue: events_highpri fill_page_cache_func [ 12.056485] Call Trace: [ 12.056485] dump_stack+0x57/0x6a [ 12.056485] dump_header+0x4c/0x30a [ 12.056485] ? del_timer_sync+0x20/0x30 [ 12.056485] out_of_memory.cold.47+0xa/0x7e [ 12.056485] __alloc_pages_slowpath.constprop.123+0x82f/0xc00 [ 12.056485] __alloc_pages_nodemask+0x289/0x2c0 [ 12.056485] __get_free_pages+0x8/0x30 [ 12.056485] fill_page_cache_func+0x39/0xb0 [ 12.056485] process_one_work+0x1ed/0x3b0 [ 12.056485] ? process_one_work+0x3b0/0x3b0 [ 12.060485] worker_thread+0x28/0x3c0 [ 12.060485] ? process_one_work+0x3b0/0x3b0 [ 12.060485] kthread+0x138/0x160 [ 12.060485] ? kthread_park+0x80/0x80 [ 12.060485] ret_from_fork+0x22/0x30 [ 12.062156] Mem-Info: [ 12.062350] active_anon:0 inactive_anon:0 isolated_anon:0 [ 12.062350] active_file:0 inactive_file:0 isolated_file:0 [ 12.062350] unevictable:0 dirty:0 writeback:0 [ 12.062350] slab_reclaimable:2797 slab_unreclaimable:80920 [ 12.062350] mapped:1 shmem:2 pagetables:8 bounce:0 [ 12.062350] free:10488 free_pcp:1227 free_cma:0 ... [ 12.101610] Out of memory and no killable processes... [ 12.102042] Kernel panic - not syncing: System is deadlocked on memory [ 12.102583] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ torvalds#510 [ 12.102600] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014 <snip> Because kvfree_rcu() has a fallback path, memory allocation failure is not the end of the world. Furthermore, the added overhead of aggressive GFP settings must be balanced against the overhead of the fallback path, which is a cache miss for double-argument kvfree_rcu() and a call to synchronize_rcu() for single-argument kvfree_rcu(). The current choice of GFP_KERNEL|__GFP_NOWARN can result in longer latencies than a call to synchronize_rcu(), so less-tenacious GFP flags would be helpful. Here is the tradeoff that must be balanced: a) Minimize use of the fallback path, b) Avoid pushing the system into OOM, c) Bound allocation latency to that of synchronize_rcu(), and d) Leave the emergency reserves to use cases lacking fallbacks. This commit therefore changes GFP flags from GFP_KERNEL|__GFP_NOWARN to GFP_KERNEL|__GFP_NORETRY|__GFP_NOMEMALLOC|__GFP_NOWARN. This combination leaves the emergency reserves alone and can initiate reclaim, but will not invoke the OOM killer. Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377f833 ] virtio_gpu_object array is not freed or unlocked in some failed cases. Signed-off-by: xndcn <xndchn@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210305151819.14330-1-xndchn@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd48c05 ] This fixes a compilation warning in pscsi_complete_cmd(): drivers/target/target_core_pscsi.c: In function ‘pscsi_complete_cmd’: drivers/target/target_core_pscsi.c:624:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */ Link: https://lore.kernel.org/r/20210228055645.22253-5-chaitanya.kulkarni@wdc.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28c7afb ] It's best if this condition is reported. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24df8b7 ] When STA2X11_VIP is enabled, and GPIOLIB is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for VIDEO_ADV7180 Depends on [n]: MEDIA_SUPPORT [=y] && GPIOLIB [=n] && VIDEO_V4L2 [=y] && I2C [=y] Selected by [y]: - STA2X11_VIP [=y] && MEDIA_SUPPORT [=y] && MEDIA_PCI_SUPPORT [=y] && MEDIA_CAMERA_SUPPORT [=y] && PCI [=y] && VIDEO_V4L2 [=y] && VIRT_TO_BUS [=y] && I2C [=y] && (STA2X11 [=n] || COMPILE_TEST [=y]) && MEDIA_SUBDRV_AUTOSELECT [=y] This is because STA2X11_VIP selects VIDEO_ADV7180 without selecting or depending on GPIOLIB, despite VIDEO_ADV7180 depending on GPIOLIB. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c39be4 ] syzbot reported memory leak in zr364xx_probe()[1]. The problem was in invalid error handling order. All error conditions rigth after v4l2_ctrl_handler_init() must call v4l2_ctrl_handler_free(). Reported-by: syzbot+efe9aefc31ae1e6f7675@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f864cf ] The folowing AMD IOMMU are affected by the RiSC engine stall, requiring a reset to maintain continual operation. After being added to the broken_dev_id list the systems are functional long term. 0x1481 is the PCI ID for the IOMMU found on Starship/Matisse 0x1419 is the PCI ID for the IOMMU found on 15h (Models 10h-1fh) family 0x5a23 is the PCI ID for the IOMMU found on RD890S/RD990 Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc271b6 ] The correct return code to report an invalid pipeline configuration is -EPIPE. Return it instead of -EINVAL from __capture_legacy_try_fmt() when the capture format doesn't match the media bus format of the connected subdev. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f6c45a ] In practice, IA_CSS_PIPE_ID_NUM should never be used when calling atomisp_q_video_buffers_to_css(), as the driver should discover the right pipe before calling it. Yet, if some pipe parsing issue happens, it could end using it. So, add a WARN_ON() to prevent such case. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d57c2 ] On all newer bq27xxx ICs, the AveragePower register contains a signed value; in addition to handling the raw value as unsigned, the driver code also didn't convert it to µW as expected. At least for the BQ28Z610, the reference manual incorrectly states that the value is in units of 1mW and not 10mW. I have no way of knowing whether the manuals of other supported ICs contain the same error, or if there are models that actually use 1mW. At least, the new code shouldn't be *less* correct than the old version for any device. power_avg is removed from the cache structure, se we don't have to extend it to store both a signed value and an error code. Always getting an up-to-date value may be desirable anyways, as it avoids inconsistent current and power readings when switching between charging and discharging. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…has been unplugged [ Upstream commit c309a3e ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5b499f ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b1cf4 ] Commit aaaa93e ("media] media: venus: venc: add video encoder files") is the last in a series of three commits to add core.c vdec.c and venc.c adding core, encoder and decoder. The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER if it has not been set, however both the encoder and decoder rely on core.v4l2_dev as valid. core.v4l2_dev will not be valid until v4l2_device_register() has completed in core.c's probe(). Normally this is never seen however, Dmitry reported the following backtrace when compiling drivers and firmware directly into a kernel image. [ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 5.275505] Workqueue: events deferred_probe_work_func [ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd [ 5.442486] pc : refcount_warn_saturate+0x140/0x148 [ 5.493756] hub 2-1:1.0: USB hub found [ 5.496266] lr : refcount_warn_saturate+0x140/0x148 [ 5.500982] hub 2-1:1.0: 4 ports detected [ 5.503440] sp : ffff80001067b730 [ 5.503442] x29: ffff80001067b730 [ 5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.598478] x28: ffff6c6bc1c379b8 [ 5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000 [ 5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001 [ 5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118 [ 5.813777] hub 1-1:1.0: USB hub found [ 5.816108] x21: ffffa5c674440000 x20: 0000000000000001 [ 5.820846] hub 1-1:1.0: 4 ports detected [ 5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff [ 5.825418] x17: 0000000000000000 x16: 0000000000000000 [ 5.825421] x15: 00000a4810c193ba x14: 0000000000000000 [ 5.825424] x13: 00000000000002b8 x12: 000000000000f20a [ 5.825427] x11: 000000000000f20a x10: 0000000000000038 [ 5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 5.845904] [ 5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780 [ 5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000 [ 5.876664] x5 : 0000000000000004 x4 : 0000000000000085 [ 5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478 [ 5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000 [ 5.893036] Call trace: [ 5.895551] refcount_warn_saturate+0x140/0x148 [ 5.900202] __video_register_device+0x64c/0xd10 [ 5.904944] venc_probe+0xc4/0x148 [ 5.908444] platform_probe+0x68/0xe0 [ 5.912210] really_probe+0x118/0x3e0 [ 5.915977] driver_probe_device+0x5c/0xc0 [ 5.920187] __device_attach_driver+0x98/0xb8 [ 5.924661] bus_for_each_drv+0x68/0xd0 [ 5.928604] __device_attach+0xec/0x148 [ 5.932547] device_initial_probe+0x14/0x20 [ 5.936845] bus_probe_device+0x9c/0xa8 [ 5.940788] device_add+0x3e8/0x7c8 [ 5.944376] of_device_add+0x4c/0x60 [ 5.948056] of_platform_device_create_pdata+0xbc/0x140 [ 5.953425] of_platform_bus_create+0x17c/0x3c0 [ 5.958078] of_platform_populate+0x80/0x110 [ 5.962463] venus_probe+0x2ec/0x4d8 [ 5.966143] platform_probe+0x68/0xe0 [ 5.969907] really_probe+0x118/0x3e0 [ 5.973674] driver_probe_device+0x5c/0xc0 [ 5.977882] __device_attach_driver+0x98/0xb8 [ 5.982356] bus_for_each_drv+0x68/0xd0 [ 5.986298] __device_attach+0xec/0x148 [ 5.990242] device_initial_probe+0x14/0x20 [ 5.994539] bus_probe_device+0x9c/0xa8 [ 5.998481] deferred_probe_work_func+0x74/0xb0 [ 6.003132] process_one_work+0x1e8/0x360 [ 6.007254] worker_thread+0x208/0x478 [ 6.011106] kthread+0x150/0x158 [ 6.014431] ret_from_fork+0x10/0x30 [ 6.018111] ---[ end trace f074246b1ecdb466 ]--- This patch fixes by - Only setting drvdata after v4l2_device_register() completes - Moving v4l2_device_register() so that suspend/reume in core::probe() stays as-is - Changes pm_ops->core_function() to take struct venus_core not struct device - Minimal rework of v4l2_device_*register in probe/remove Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 396c100 ] We are spending way too much effort on qdio-internal bookkeeping for QAOB management & caching, and it's still not robust. Once qdio's TX path has detached the QAOB from a PENDING buffer, we lost all track of it until it shows up in a CQ notification again. So if the device is torn down before that notification arrives, we leak the QAOB. Just have the driver take care of it, and simply pass down a QAOB if they want a TX with async-completion capability. For a buffer in PENDING state that requires the QAOB for final completion, qeth can now also try to recycle the buffer's QAOB rather than unconditionally freeing it. This also eliminates the qdio_outbuf_state array, which was only needed to transfer the aob->user1 tag from the driver to the qdio layer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c759b29 ] Add a fix for the memory leak bugs that can occur when the saa7164_encoder_register() function fails. The function allocates memory without explicitly freeing it when errors occur. Add a better error handling that deallocate the unused buffers before the function exits during a fail. Signed-off-by: Daniel Niv <danielniv3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaaea46 ] act_len can be uninitialized if usb_bulk_msg() returns an error. Set it to 0 to avoid a KMSAN error. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+a4e309017a5f3a24c7b3@syzkaller.appspotmail.com Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea1611b ] The V4L2_CID_STATELESS_FWHT_PARAMS compound control was missing a proper initialization of the flags field, so after loading the vicodec module for the first time, running v4l2-compliance for the stateless decoder would fail on this control because the initial control value was considered invalid by the vicodec driver. Initializing the flags field to sane values fixes this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2469b83 ] Fixes coccicheck error: drivers/power/supply/pm2301_charger.c:1089:7-27: ERROR: drivers/power/supply/lp8788-charger.c:502:8-28: ERROR: drivers/power/supply/tps65217_charger.c:239:8-33: ERROR: drivers/power/supply/tps65090-charger.c:303:8-33: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by: dongjian <dongjian@yulong.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdfd4c6 ] WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset. Therefore, use the sink address as base instead of the ctrl address. This fixes the sync toggle on wled4, which can be observed by the fact that adjusting brightness now works. It has no effect on wled3 because sink and ctrl base addresses are the same. This allows adjusting the brightness without having to disable then reenable the module. Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d6e9cd ] Currently, for WLED5, the FSC (Full scale current) setting is not updated properly due to driver toggling the wrong register after an FSC update. On WLED5 we should only toggle the MOD_SYNC bit after a brightness update. For an FSC update we need to toggle the SYNC bits instead. Fix it by adopting the common wled3_sync_toggle() for WLED5 and introducing new code to the brightness update path to compensate. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b672cb1 ] If xnack is on, VM retry fault interrupt send to IH ring1, and ring1 will be full quickly. IH cannot receive other interrupts, this causes deadlock if migrating buffer using sdma and waiting for sdma done while handling retry fault. Remove VMC from IH storm client, enable ring1 write pointer overflow, then IH will drop retry fault interrupts and be able to receive other interrupts while driver is handling retry fault. IH ring1 write pointer doesn't writeback to memory by IH, and ring1 write pointer recorded by self-irq is not updated, so always read the latest ring1 write pointer from register. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9c59a ] By default this timestamp is 32 bit counter. It gets overflowed in around 10 minutes. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac5617 ] The psp supplies the link type in the upper 2 bits of the psp xgmi node information num_hops field. With a new link type, Aldebaran has these bits set to a non-zero value (1 = xGMI3) so the KFD topology will report the incorrect IO link weights without proper masking. The actual number of hops is located in the 3 least significant bits of this field so mask if off accordingly before passing it to the KFD. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Amber Lin <amber.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50e2fc3 ] If get_num_sdma_queues or get_num_xgmi_sdma_queues is 0, we end up doing a shift operation where the number of bits shifted equals number of bits in the operand. This behaviour is undefined. Set num_sdma_queues or num_xgmi_sdma_queues to ULLONG_MAX, if the count is >= number of bits in the operand. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1472 Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Mar 24, 2025
into HEAD KVM x86 fixes for 6.14-rcN #2 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow. - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs. - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent. - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge. - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault. - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror. - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM.
esmil
pushed a commit
that referenced
this pull request
Mar 24, 2025
A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... Fixes: f7a70d6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
esmil
pushed a commit
that referenced
this pull request
Mar 24, 2025
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 191.389588] ? do_user_addr_fault+0x559/0x800 [ 191.390027] ? irqentry_exit_to_user_mode+0x43/0x230 [ 191.390525] ? irqentry_exit+0x1d/0x30 [ 191.390879] ? exc_page_fault+0x86/0x160 [ 191.391235] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 191.391745] RIP: 0033:0x7dbc4ff1c574 [ 191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574 [ 191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001 [ 191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000 [ 191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005 [ 191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0 [ 191.396987] </TASK> To fix this, we explicitly set such mana debugfs variables to NULL after debugfs_remove() is called. Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
If the PHY driver uses another PHY internally (e.g. in case of eUSB2,
repeaters are represented as PHYs), then it would trigger the following
lockdep splat because all PHYs use a single static lockdep key and thus
lockdep can not identify whether there is a dependency or not and
reports a false positive.
Make PHY subsystem use dynamic lockdep keys, assigning each driver a
separate key. This way lockdep can correctly identify dependency graph
between mutexes.
============================================
WARNING: possible recursive locking detected
6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted
--------------------------------------------
kworker/u51:0/78 is trying to acquire lock:
ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
but task is already holding lock:
ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&phy->mutex);
lock(&phy->mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u51:0/78:
#0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec
#1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec
#2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188
#3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c
stack backtrace:
CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT
Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
print_deadlock_bug+0x258/0x348
__lock_acquire+0x10fc/0x1f84
lock_acquire+0x1c8/0x338
__mutex_lock+0xb8/0x59c
mutex_lock_nested+0x24/0x30
phy_init+0x4c/0x12c
snps_eusb2_hsphy_init+0x54/0x1a0
phy_init+0xe0/0x12c
dwc3_core_init+0x450/0x10b4
dwc3_core_probe+0xce4/0x15fc
dwc3_probe+0x64/0xb0
platform_probe+0x68/0xc4
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5ec
worker_thread+0x1c0/0x368
kthread+0x14c/0x20c
ret_from_fork+0x10/0x20
Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater")
Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
…-flight
Reject migration of SEV{-ES} state if either the source or destination VM
is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the
section between incrementing created_vcpus and online_vcpus. The bulk of
vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs
in parallel, and so sev_info.es_active can get toggled from false=>true in
the destination VM after (or during) svm_vcpu_create(), resulting in an
SEV{-ES} VM effectively having a non-SEV{-ES} vCPU.
The issue manifests most visibly as a crash when trying to free a vCPU's
NULL VMSA page in an SEV-ES VM, but any number of things can go wrong.
BUG: unable to handle page fault for address: ffffebde00000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline]
RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline]
RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline]
RIP: 0010:PageHead include/linux/page-flags.h:866 [inline]
RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067
Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0
RSP: 0018:ffff8984551978d0 EFLAGS: 00010246
RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000
RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000
R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000
R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000
FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169
svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515
kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396
kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline]
kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490
kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895
kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310
kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369
__fput+0x3e4/0x9e0 fs/file_table.c:465
task_work_run+0x1a9/0x220 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x7f0/0x25b0 kernel/exit.c:953
do_group_exit+0x203/0x2d0 kernel/exit.c:1102
get_signal+0x1357/0x1480 kernel/signal.c:3034
arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218
do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f87a898e969
</TASK>
Modules linked in: gq(O)
gsmi: Log Shutdown Reason 0x03
CR2: ffffebde00000000
---[ end trace 0000000000000000 ]---
Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing
the host is likely desirable due to the VMSA being consumed by hardware.
E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a
bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered
away thanks to L1TF, but panicking in this scenario is preferable to
potentially running with corrupted state.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Fixes: 0b020f5 ("KVM: SEV: Add support for SEV-ES intra host migration")
Fixes: b566393 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Cc: James Houghton <jthoughton@google.com>
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250602224459.41505-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
The issue arises when kzalloc() is invoked while holding umem_mutex or
any other lock acquired under umem_mutex. This is problematic because
kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke
mmu_notifier_invalidate_range_start(). This function can lead to
mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again,
resulting in a deadlock.
The problematic flow:
CPU0 | CPU1
---------------------------------------|------------------------------------------------
mlx5_ib_dereg_mr() |
→ revoke_mr() |
→ mutex_lock(&umem_odp->umem_mutex) |
| mlx5_mkey_cache_init()
| → mutex_lock(&dev->cache.rb_lock)
| → mlx5r_cache_create_ent_locked()
| → kzalloc(GFP_KERNEL)
| → fs_reclaim()
| → mmu_notifier_invalidate_range_start()
| → mlx5_ib_invalidate_range()
| → mutex_lock(&umem_odp->umem_mutex)
→ cache_ent_find_and_store() |
→ mutex_lock(&dev->cache.rb_lock) |
Additionally, when kzalloc() is called from within
cache_ent_find_and_store(), we encounter the same deadlock due to
re-acquisition of umem_mutex.
Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr()
and before acquiring rb_lock. This ensures that we don't hold
umem_mutex while performing memory allocations that could trigger
the reclaim path.
This change prevents the deadlock by ensuring proper lock ordering and
avoiding holding locks during memory allocation operations that could
trigger the reclaim path.
The following lockdep warning demonstrates the deadlock:
python3/20557 is trying to acquire lock:
ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at:
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
but task is already holding lock:
ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at:
unmap_vmas+0x7b/0x1a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x60/0xd0
mem_cgroup_css_alloc+0x6f/0x9b0
cgroup_init_subsys+0xa4/0x240
cgroup_init+0x1c8/0x510
start_kernel+0x747/0x760
x86_64_start_reservations+0x25/0x30
x86_64_start_kernel+0x73/0x80
common_startup_64+0x129/0x138
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x91/0xd0
__kmalloc_cache_noprof+0x4d/0x4c0
mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib]
mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib]
mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib]
__mlx5_ib_add+0x4b/0x190 [mlx5_ib]
mlx5r_probe+0xd9/0x320 [mlx5_ib]
auxiliary_bus_probe+0x42/0x70
really_probe+0xdb/0x360
__driver_probe_device+0x8f/0x130
driver_probe_device+0x1f/0xb0
__driver_attach+0xd4/0x1f0
bus_for_each_dev+0x79/0xd0
bus_add_driver+0xf0/0x200
driver_register+0x6e/0xc0
__auxiliary_driver_register+0x6a/0xc0
do_one_initcall+0x5e/0x390
do_init_module+0x88/0x240
init_module_from_file+0x85/0xc0
idempotent_init_module+0x104/0x300
__x64_sys_finit_module+0x68/0xc0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dev->cache.rb_lock){+.+.}-{4:4}:
__mutex_lock+0x98/0xf10
__mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib]
mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib]
ib_dereg_mr_user+0x85/0x1f0 [ib_core]
uverbs_free_mr+0x19/0x30 [ib_uverbs]
destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs]
uobj_destroy+0x57/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs]
ib_uverbs_ioctl+0x129/0x230 [ib_uverbs]
__x64_sys_ioctl+0x596/0xaa0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}:
__lock_acquire+0x1826/0x2f00
lock_acquire+0xd3/0x2e0
__mutex_lock+0x98/0xf10
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x18e/0x1f0
unmap_vmas+0x182/0x1a0
exit_mmap+0xf3/0x4a0
mmput+0x3a/0x100
do_exit+0x2b9/0xa90
do_group_exit+0x32/0xa0
get_signal+0xc32/0xcb0
arch_do_signal_or_restart+0x29/0x1d0
syscall_exit_to_user_mode+0x105/0x1d0
do_syscall_64+0x79/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chain exists of:
&dev->cache.rb_lock --> mmu_notifier_invalidate_range_start -->
&umem_odp->umem_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&umem_odp->umem_mutex);
lock(mmu_notifier_invalidate_range_start);
lock(&umem_odp->umem_mutex);
lock(&dev->cache.rb_lock);
*** DEADLOCK ***
Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
When I run the NVME over TCP test in virtme-ng, I get the following "suspicious RCU usage" warning in nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] <TASK> [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044559][ T25] ret_from_fork+0x218/0x2e0 [ 5.044561][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044562][ T25] ret_from_fork_asm+0x1a/0x30 [ 5.044570][ T25] </TASK> ''' This patch uses sleepable RCU version of helper list_for_each_entry_srcu() instead of list_for_each_entry_rcu() to fix it. Fixes: 4dbd2b2 ("nvme-multipath: Add visibility for round-robin io-policy") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated
on module load:
[ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
[ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager
[ 324.701689] preempt_count: 201, expected: 0
[ 324.701693] RCU nest depth: 0, expected: 0
[ 324.701697] 2 locks held by NetworkManager/1582:
[ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0
[ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870
[ 324.701749] Preemption disabled at:
[ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870
[ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary)
[ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022
[ 324.701774] Call Trace:
[ 324.701777] <TASK>
[ 324.701779] dump_stack_lvl+0x5d/0x80
[ 324.701788] ? __dev_open+0x3dd/0x870
[ 324.701793] __might_resched.cold+0x1ef/0x23d
<..>
[ 324.701818] __mutex_lock+0x113/0x1b80
<..>
[ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf]
[ 324.701935] ? kasan_save_track+0x14/0x30
[ 324.701941] idpf_mb_clean+0x143/0x380 [idpf]
<..>
[ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf]
[ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf]
[ 324.702021] ? rcu_is_watching+0x12/0xc0
[ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf]
<..>
[ 324.702122] __hw_addr_sync_dev+0x1cf/0x300
[ 324.702126] ? find_held_lock+0x32/0x90
[ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf]
[ 324.702152] __dev_open+0x3f8/0x870
[ 324.702159] ? __pfx___dev_open+0x10/0x10
[ 324.702174] __dev_change_flags+0x443/0x650
<..>
[ 324.702208] netif_change_flags+0x80/0x160
[ 324.702218] do_setlink.isra.0+0x16a0/0x3960
<..>
[ 324.702349] rtnl_newlink+0x12fd/0x21e0
The sequence is as follows:
rtnl_newlink()->
__dev_change_flags()->
__dev_open()->
dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock"
idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON
__dev_uc_sync() ->
idpf_add_mac_filter ->
idpf_add_del_mac_filters ->
idpf_send_mb_msg() ->
idpf_mb_clean() ->
idpf_ctlq_clean_sq() # mutex_lock(cq_lock)
Fix by converting cq_lock to a spinlock. All operations under the new
lock are safe except freeing the DMA memory, which may use vunmap(). Fix
by requesting a contiguous physical memory for the DMA mapping.
Fixes: a251eee ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP
is enabled for dm-bufio. However, when bufio tries to evict buffers, there
is a chance to trigger scheduling in spin_lock_bh, the following warning
is hit:
BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by kworker/2:2/123:
#0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970
#1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970
#2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710
#3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 torvalds#305 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: dm_bufio_cache do_global_cleanup
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
__might_resched+0x360/0x4e0
do_global_cleanup+0x2f5/0x710
process_one_work+0x7db/0x1970
worker_thread+0x518/0xea0
kthread+0x359/0x690
ret_from_fork+0xf3/0x1b0
ret_from_fork_asm+0x1a/0x30
</TASK>
That can be reproduced by:
veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb
SIZE=$(blockdev --getsz /dev/vda)
dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet"
mount /dev/dm-0 /mnt -o ro
echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes
[read files in /mnt]
Cc: stable@vger.kernel.org # v6.4+
Fixes: 450e8de ("dm bufio: improve concurrent IO performance")
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
This reverts commit 7796c97. This patch broke Dragonboard 845c (sdm845). I see: Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f20003e8 [#1] SMP pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] lr : snd_soc_dai_set_channel_map+0x34/0x78 Call trace: qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P) sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845] snd_soc_link_init+0x28/0x6c snd_soc_bind_card+0x5f4/0xb0c snd_soc_register_card+0x148/0x1a4 devm_snd_soc_register_card+0x50/0xb0 sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845] platform_probe+0x6c/0xd0 really_probe+0xc0/0x2a4 __driver_probe_device+0x7c/0x130 driver_probe_device+0x40/0x118 __device_attach_driver+0xc4/0x108 bus_for_each_drv+0x8c/0xf0 __device_attach+0xa4/0x198 device_initial_probe+0x18/0x28 bus_probe_device+0xb8/0xbc deferred_probe_work_func+0xac/0xfc process_one_work+0x244/0x658 worker_thread+0x1b4/0x360 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Kernel panic - not syncing: BRK handler: Fatal exception Dan has also reported following issues with the original patch https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/ Bug #1: The zeroeth element of ctrl->pconfig[] is supposed to be unused. We start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128. Bug #2: There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts memory like Yongqin Liu pointed out. Bug 3: Like Jie Gan pointed out, it erases all the tx information with the rx information. Cc: stable@vger.kernel.org # v6.15+ Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Acked-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250709174949.8541-1-amit.pundir@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Aug 6, 2025
into HEAD KVM/riscv fixes for 6.16, take #2 - Disable vstimecmp before exiting to user-space - Move HGEI[E|P] CSR access to IMSIC virtualization
esmil
pushed a commit
that referenced
this pull request
Aug 19, 2025
With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ #10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
If preparing a write bio fails then blk_zone_wplug_bio_work() calls
bio_endio() with zwplug->lock held. If a device mapper driver is stacked
on top of the zoned block device then this results in nested locking of
zwplug->lock. The resulting lockdep complaint is a false positive
because this is nested locking and not recursive locking. Suppress this
false positive by calling blk_zone_wplug_bio_io_error() without holding
zwplug->lock. This is safe because no code in
blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This
patch suppresses the following lockdep complaint:
WARNING: possible recursive locking detected
--------------------------------------------
kworker/3:0H/46 is trying to acquire lock:
ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0
but task is already holding lock:
ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&zwplug->lock);
lock(&zwplug->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/3:0H/46:
#0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c
stack backtrace:
CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: sdd_zwplugs blk_zone_wplug_bio_work
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_deadlock_bug+0x38c/0x398
__lock_acquire+0x13e8/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
blk_zone_write_plug_bio_endio+0x64/0x1f0
bio_endio+0x9c/0x240
__dm_io_complete+0x214/0x260
clone_endio+0xe8/0x214
bio_endio+0x218/0x240
blk_zone_wplug_bio_work+0x204/0x48c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: dd291d7 ("block: Introduce zone write plugging")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, take #2 - Correctly handle 'invariant' system registers for protected VMs - Improved handling of VNCR data aborts, including external aborts - Fixes for handling of FEAT_RAS for NV guests, providing a sane fault context during SEA injection and preventing the use of RASv1p1 fault injection hardware - Ensure that page table destruction when a VM is destroyed gives an opportunity to reschedule - Large fix to KVM's infrastructure for managing guest context loaded on the CPU, addressing issues where the output of AT emulation doesn't get reflected to the guest - Fix AT S12 emulation to actually perform stage-2 translation when necessary - Avoid attempting vLPI irqbypass when GICv4 has been explicitly disabled for a VM - Minor KVM + selftest fixes
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if:
1) a phandle in the "cpus" property does not correspond to a valid OF
node
2 a CPU logical id does not exist for a given OF cpu_node
#1 is a firmware bug and should be reported as such but does not warrant a
WARN_ON() backtrace.
#2 is not necessarily an error condition (eg a kernel can be booted with
nr_cpus=X limiting the number of cores artificially) and therefore there
is no reason to clutter the kernel log with WARN_ON() output when the
condition is hit.
Rework the IRS affinity parsing code to remove undue WARN_ON()s thus
making it less noisy.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250814094138.1611017-1-lpieralisi@kernel.org
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
Ido Schimmel says:
====================
vxlan: Fix NPDs when using nexthop objects
With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.
Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.
Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================
Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
The commit ced17ee ("Revert "virtio: reject shm region if length is zero"") exposes the following DAX page fault bug (this fix the failure that getting shm region alway returns false because of zero length): The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()' should be replaced with 'PHYS_PFN()'. [ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008 [ 1.390875] #PF: supervisor read access in kernel mode [ 1.391257] #PF: error_code(0x0000) - not-present page [ 1.391509] PGD 0 P4D 0 [ 1.391626] Oops: Oops: 0000 [#1] SMP NOPTI [ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none) [ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.397518] Call Trace: [ 1.397663] <TASK> [ 1.397900] dax_insert_entry+0x13b/0x390 [ 1.398179] dax_fault_iter+0x2a5/0x6c0 [ 1.398443] dax_iomap_pte_fault+0x193/0x3c0 [ 1.398750] __fuse_dax_fault+0x8b/0x270 [ 1.398997] ? vm_mmap_pgoff+0x161/0x210 [ 1.399175] __do_fault+0x30/0x180 [ 1.399360] do_fault+0xc4/0x550 [ 1.399547] __handle_mm_fault+0x8e3/0xf50 [ 1.399731] ? do_syscall_64+0x72/0x1e0 [ 1.399958] handle_mm_fault+0x192/0x2f0 [ 1.400204] do_user_addr_fault+0x20e/0x700 [ 1.400418] exc_page_fault+0x66/0x150 [ 1.400602] asm_exc_page_fault+0x26/0x30 [ 1.400831] RIP: 0033:0x72596d1bf703 [ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8 [ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202 [ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7 [ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560 [ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000 [ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001 [ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003 [ 1.404450] </TASK> [ 1.404570] Modules linked in: [ 1.404821] CR2: ffffd3fb40000008 [ 1.405029] ---[ end trace 0000000000000000 ]--- [ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.410437] Kernel panic - not syncing: Fatal exception [ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 21aa65b ("mm: remove callers of pfn_t functionality") Signed-off-by: Haiyue Wang <haiyuewa@163.com> Link: https://lore.kernel.org/20250904120339.972-1-haiyuewa@163.com Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <jpalus@fastmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tony Dinh <mibodhi@gmail.com> Tested-by: Jan Palus <jpalus@fastmail.com> Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
syzkaller has caught us red-handed once more, this time nesting regular
spinlocks behind raw spinlocks:
=============================
[ BUG: Invalid wait context ]
6.16.0-rc3-syzkaller-g7b8346bd9fce #0 Not tainted
-----------------------------
syz.0.29/3743 is trying to lock:
a3ff80008e2e9e18 (&xa->xa_lock#20){....}-{3:3}, at: vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137
other info that might help us debug this:
context-{5:5}
3 locks held by syz.0.29/3743:
#0: a3ff80008e2e90a8 (&kvm->slots_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x50/0x624 arch/arm64/kvm/vgic/vgic-init.c:499
#1: a3ff80008e2e9fa0 (&kvm->arch.config_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x5c/0x624 arch/arm64/kvm/vgic/vgic-init.c:500
#2: 58f0000021be1428 (&vgic_cpu->ap_list_lock){....}-{2:2}, at: vgic_flush_pending_lpis+0x3c/0x31c arch/arm64/kvm/vgic/vgic.c:150
stack backtrace:
CPU: 0 UID: 0 PID: 3743 Comm: syz.0.29 Not tainted 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
dump_stack+0x1c/0x28 lib/dump_stack.c:129
print_lock_invalid_wait_context kernel/locking/lockdep.c:4833 [inline]
check_wait_context kernel/locking/lockdep.c:4905 [inline]
__lock_acquire+0x978/0x299c kernel/locking/lockdep.c:5190
lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5871
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x5c/0x7c kernel/locking/spinlock.c:162
vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137
vgic_flush_pending_lpis+0x24c/0x31c arch/arm64/kvm/vgic/vgic.c:158
__kvm_vgic_vcpu_destroy+0x44/0x500 arch/arm64/kvm/vgic/vgic-init.c:455
kvm_vgic_destroy+0x100/0x624 arch/arm64/kvm/vgic/vgic-init.c:505
kvm_arch_destroy_vm+0x80/0x138 arch/arm64/kvm/arm.c:244
kvm_destroy_vm virt/kvm/kvm_main.c:1308 [inline]
kvm_put_kvm+0x800/0xff8 virt/kvm/kvm_main.c:1344
kvm_vm_release+0x58/0x78 virt/kvm/kvm_main.c:1367
__fput+0x4ac/0x980 fs/file_table.c:465
____fput+0x20/0x58 fs/file_table.c:493
task_work_run+0x1bc/0x254 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
do_notify_resume+0x1b4/0x270 arch/arm64/kernel/entry-common.c:151
exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
el0_svc+0xb4/0x160 arch/arm64/kernel/entry-common.c:768
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
This is of course no good, but is at odds with how LPI refcounts are
managed. Solve the locking mess by deferring the release of unreferenced
LPIs after the ap_list_lock is released. Mark these to-be-released LPIs
specially to avoid racing with vgic_put_irq() and causing a double-free.
Since references can only be taken on LPIs with a nonzero refcount,
extending the lifetime of freed LPIs is still safe.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reported-by: syzbot+cef594105ac7e60c6d93@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/kvmarm/68acd0d9.a00a0220.33401d.048b.GAE@google.com/
Link: https://lore.kernel.org/r/20250905100531.282980-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
…ostcopy When you run a KVM guest with vhost-net and migrate that guest to another host, and you immediately enable postcopy after starting the migration, there is a big chance that the network connection of the guest won't work anymore on the destination side after the migration. With a debug kernel v6.16.0, there is also a call trace that looks like this: FAULT_FLAG_ALLOW_RETRY missing 881 CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 torvalds#56 NONE Hardware name: IBM 3931 LA1 400 (LPAR) Workqueue: events irqfd_inject [kvm] Call Trace: [<00003173cbecc634>] dump_stack_lvl+0x104/0x168 [<00003173cca69588>] handle_userfault+0xde8/0x1310 [<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760 [<00003173cc759212>] __handle_mm_fault+0x452/0xa00 [<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0 [<00003173cc73409a>] __get_user_pages+0x4aa/0xba0 [<00003173cc7349e8>] get_user_pages_remote+0x258/0x770 [<000031734be6f052>] get_map_page+0xe2/0x190 [kvm] [<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm] [<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm] [<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm] [<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm] [<00003173cc00c9ec>] process_one_work+0x87c/0x1490 [<00003173cc00dda6>] worker_thread+0x7a6/0x1010 [<00003173cc02dc36>] kthread+0x3b6/0x710 [<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0 [<00003173cdd737ca>] ret_from_fork+0xa/0x30 3 locks held by kworker/6:2/549: #0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490 #1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490 #2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm] The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd() saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd cannot remotely resolve it (because the caller was asking for an immediate resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time). With that, get_map_page() failed and the irq was lost. We should not be strictly in an atomic environment here and the worker should be sleepable (the call is done during an ioctl from userspace), so we can allow adapter_indicators_set() to just sleep waiting for the remote fault instead. Link: https://issues.redhat.com/browse/RHEL-42486 Signed-off-by: Peter Xu <peterx@redhat.com> [thuth: Assembled patch description and fixed some cosmetical issues] Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Fixes: f654706 ("KVM: s390/interrupt: do not pin adapter interrupt pages") [frankja: Added fixes tag] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
This attemps to fix possible UAFs caused by struct mgmt_pending being freed while still being processed like in the following trace, in order to fix mgmt_pending_valid is introduce and use to check if the mgmt_pending hasn't been removed from the pending list, on the complete callbacks it is used to check and in addtion remove the cmd from the list while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd is left on the list it can still be accessed and freed. BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55 CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 12210: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 __add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247 add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 sock_write_iter+0x258/0x330 net/socket.c:1133 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 12221: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4648 [inline] kfree+0x18e/0x440 mm/slub.c:4847 mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 __mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444 hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290 hci_dev_do_close net/bluetooth/hci_core.c:501 [inline] hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526 sock_do_ioctl+0xd9/0x300 net/socket.c:1192 sock_ioctl+0x576/0x790 net/socket.c:1313 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: cf75ad8 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Fixes: 2bd1b23 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_DISCOVERABLE to use cmd_sync") Fixes: f056a65 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_CONNECTABLE to use cmd_sync") Fixes: 3244845 ("Bluetooth: hci_sync: Convert MGMT_OP_SSP") Fixes: d81a494 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LE") Fixes: b338d91 ("Bluetooth: Implement support for Mesh") Fixes: 6f6ff38 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME") Fixes: 71efbb0 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_PHY_CONFIGURATION") Fixes: b747a83 ("Bluetooth: hci_sync: Refactor add Adv Monitor") Fixes: abfeea4 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Fixes: 26ac4c5 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_ADVERTISING") Reported-by: cen zhang <zzzccc427@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Akira Tsukamoto akira.tsukamoto@gmail.com