riscv: dts: starfive: jh7100: Refer to labels from aliases #3

geertu · 2021-05-11T13:57:20Z

Let the aliases refer to device nodes using their labels, instead of
absolute paths.

Fixes: 3ca5133 ("riscv: dts: Add JH7100 and BeagleV Starlight support")
Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org

esmil · 2021-05-11T14:49:10Z

Thanks. This is definitely an improvement, but according to the datasheet we have the chip has both spi0, spi1, spi2, spi3 and the qspi, so calling qspi "spi0" in the chip dtsi file is probably not the right thing to do. Come to think of it all these aliases should probably be moved to the board file instead. Right?

geertu · 2021-05-11T16:07:46Z

Probably most of them should be removed. mshcX might be useful, as they can be used to be point to the root file system.
But indeed, they're board-specific.

esmil · 2021-05-11T17:00:05Z

Thanks. I've updated and moved the mshcX aliases to the board file and deleted rest.

commit 2c88d45 upstream. Commit 1340ccf ("x86,sched: Allow topologies where NUMA nodes share an LLC") added a vendor and model specific check to never call topology_sane() for Intel Skylake Server systems where NUMA nodes share an LLC. Intel Ice Lake and Sapphire Rapids CPUs also enumerate an LLC that is shared by multiple NUMA nodes. The LLC on these CPUs is shared for off-package data access but private to the NUMA node for on-package access. Rather than managing a list of allowable SNC topologies, make this SNC topology the default, and treat Intel's Cluster-On-Die (COD) topology as the exception. In SNC mode, Sky Lake, Ice Lake, and Sapphire Rapids servers do not emit this warning: sched: CPU #3's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210310190233.31752-1-alison.schofield@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b5332a9 ] We are not changing anything in the TCP connection state so we should not take a write_lock but rather a read lock. This caused a deadlock when running nvmet-tcp and nvme-tcp on the same system, where state_change callbacks on the host and on the controller side have causal relationship and made lockdep report on this with blktests: ================================ WARNING: inconsistent lock state 5.12.0-rc3 #1 Tainted: G I -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage. nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x79b/0x18d0 lock_acquire+0x1ca/0x480 _raw_write_lock_bh+0x39/0x80 nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp] tcp_fin+0x2a8/0x780 tcp_data_queue+0xf94/0x1f20 tcp_rcv_established+0x6ba/0x1f00 tcp_v4_do_rcv+0x502/0x760 tcp_v4_rcv+0x257e/0x3430 ip_protocol_deliver_rcu+0x69/0x6a0 ip_local_deliver_finish+0x1e2/0x2f0 ip_local_deliver+0x1a2/0x420 ip_rcv+0x4fb/0x6b0 __netif_receive_skb_one_core+0x162/0x1b0 process_backlog+0x1ff/0x770 __napi_poll.constprop.0+0xa9/0x5c0 net_rx_action+0x7b3/0xb30 __do_softirq+0x1f0/0x940 do_softirq+0xa1/0xd0 __local_bh_enable_ip+0xd8/0x100 ip_finish_output2+0x6b7/0x18a0 __ip_queue_xmit+0x706/0x1aa0 __tcp_transmit_skb+0x2068/0x2e20 tcp_write_xmit+0xc9e/0x2bb0 __tcp_push_pending_frames+0x92/0x310 inet_shutdown+0x158/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae irq event stamp: 10687 hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40 hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90 softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940 softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(clock-AF_INET); <Interrupt> lock(clock-AF_INET); *** DEADLOCK *** 5 locks held by nvme/1324: #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp] #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300 stack backtrace: CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020 Call Trace: dump_stack+0x93/0xc2 mark_lock_irq.cold+0x2c/0xb3 ? verify_lock_unused+0x390/0x390 ? stack_trace_consume_entry+0x160/0x160 ? lock_downgrade+0x100/0x100 ? save_trace+0x88/0x5e0 ? _raw_spin_unlock_irqrestore+0x2d/0x40 mark_lock+0x530/0x1470 ? mark_lock_irq+0x1d10/0x1d10 ? enqueue_timer+0x660/0x660 mark_usage+0x215/0x2a0 __lock_acquire+0x79b/0x18d0 ? tcp_schedule_loss_probe.part.0+0x38c/0x520 lock_acquire+0x1ca/0x480 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? rcu_read_unlock+0x40/0x40 ? tcp_mtu_probe+0x1ae0/0x1ae0 ? kmalloc_reserve+0xa0/0xa0 ? sysfs_file_ops+0x170/0x170 _raw_read_lock+0x3d/0xa0 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? sysfs_file_ops+0x170/0x170 inet_shutdown+0x189/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 ? new_sync_read+0x600/0x600 ? lock_acquire+0x1ca/0x480 ? rcu_read_unlock+0x40/0x40 ? lock_is_held_type+0x9a/0x110 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 ? __ia32_sys_read+0xa0/0xa0 ? lockdep_hardirqs_on_prepare.part.0+0x198/0x340 ? syscall_enter_from_user_mode+0x27/0x70 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 872d26a ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1748696 ] Commit eab2404 ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb73df33eee Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018 RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000 R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000 R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0 Fixes: eab2404 ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bbd6f0a ] In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…xtent When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

…xtent [ Upstream commit 6416954 ] When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have: * `i` - the index of the CRTC * `channel` - the channel a CRTC is using When we check the channel state, we consult: old_hvs_state->fifo_state[channel].in_use ... but when we wait for the channel, we erroneously wait on: old_hvs_state->fifo_state[i].pending_commit ... rather than: old_hvs_state->fifo_state[channel].pending_commit ... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index. I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN. Trimmed KASAN splat: | ================================================================== | BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910 | Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7 | CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3 | | Hardware name: Raspberry Pi 3 Model B (DT) | Workqueue: events_unbound deferred_probe_work_func | Call trace: | dump_backtrace+0x0/0x2b4 | show_stack+0x1c/0x30 | dump_stack+0xfc/0x168 | print_address_description.constprop.0+0x2c/0x2c0 | kasan_report+0x1dc/0x240 | __asan_load8+0x98/0xd4 | vc4_atomic_commit_tail+0x1cc/0x910 | commit_tail+0x100/0x210 | ... | | Allocated by task 7: | kasan_save_stack+0x2c/0x60 | __kasan_kmalloc+0x90/0xb4 | vc4_hvs_channels_duplicate_state+0x60/0x1a0 | drm_atomic_get_private_obj_state+0x144/0x230 | vc4_atomic_check+0x40/0x73c | drm_atomic_check_only+0x998/0xe60 | drm_atomic_commit+0x34/0x94 | drm_client_modeset_commit_atomic+0x2f4/0x3a0 | drm_client_modeset_commit_locked+0x8c/0x230 | drm_client_modeset_commit+0x38/0x60 | drm_fb_helper_set_par+0x104/0x17c | fbcon_init+0x43c/0x970 | visual_init+0x14c/0x1e4 | ... | | The buggy address belongs to the object at ffff000007360400 | which belongs to the cache kmalloc-128 of size 128 | The buggy address is located 64 bytes inside of | 128-byte region [ffff000007360400, ffff000007360480) | The buggy address belongs to the page: | page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360 | flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff) | raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300 | raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 | page dumped because: kasan: bad access detected | | Memory state around the buggy address: | ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc | ^ | ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ================================================================== Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Will Deacon <will@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com

Merge branch 'mlxsw-fixes' Ido Schimmel says: ==================== mlxsw: Thermal and qdisc fixes Patches #1-#2 fix wrong validation of burst size in qdisc code and a user triggerable WARN_ON(). Patch #3 fixes a regression in thermal monitoring of transceiver modules and gearboxes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

I see a "virt_to_phys used for non-linear address" warning from check_usemap_section_nr() on arm64 platforms. In current implementation of NODE_DATA, if CONFIG_NEED_MULTIPLE_NODES=y, pglist_data is dynamically allocated and assigned to node_data[]. For example, in arch/arm64/include/asm/mmzone.h: extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[(nid)]) If CONFIG_NEED_MULTIPLE_NODES=n, pglist_data is defined as a global variable named "contig_page_data". For example, in include/linux/mmzone.h: extern struct pglist_data contig_page_data; #define NODE_DATA(nid) (&contig_page_data) If CONFIG_DEBUG_VIRTUAL is not enabled, __pa() can handle both dynamically allocated linear addresses and symbol addresses. However, if (CONFIG_DEBUG_VIRTUAL=y && CONFIG_NEED_MULTIPLE_NODES=n) we can see the "virt_to_phys used for non-linear address" warning because that &contig_page_data is not a linear address on arm64. Warning message: virt_to_phys used for non-linear address: (contig_page_data+0x0/0x1c00) WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x58/0x68 Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.13.0-rc1-00074-g1140ab592e2e #3 Hardware name: linux,dummy-virt (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--) Call trace: __virt_to_phys+0x58/0x68 check_usemap_section_nr+0x50/0xfc sparse_init_nid+0x1ac/0x28c sparse_init+0x1c4/0x1e0 bootmem_init+0x60/0x90 setup_arch+0x184/0x1f0 start_kernel+0x78/0x488 To fix it, create a small function to handle both translation. Link: https://lkml.kernel.org/r/1623058729-27264-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Kazu <k-hagio-ab@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ASan reported a memory leak of BPF-related ksymbols map and dso. The leak is caused by refount never reaching 0, due to missing __put calls in the function machine__process_ksymbol_register. Once the dso is inserted in the map, dso__put() should be called (map__new2() increases the refcount to 2). The same thing applies for the map when it's inserted into maps (maps__insert() increases the refcount to 2). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 6992 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20 #2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10 [...] Indirect leak of 8702 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20 #2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9 #3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21 [...] Indirect leak of 1520 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8 [...] Indirect leak of 1406 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8 [...] Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

On trogdor devices I see the following lockdep splat when stopping youtube with lockdep enabled in the kernel. ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc2 torvalds#71 Not tainted ------------------------------------------------------ ThreadPoolSingl/3969 is trying to acquire lock: ffffff80d4d5c080 (&inst->lock#3){+.+.}-{3:3}, at: vdec_buf_cleanup+0x3c/0x17c [venus_dec] but task is already holding lock: ffffff80d3c3c4f8 (&q->mmap_lock){+.+.}-{3:3}, at: vb2_core_reqbufs+0xe4/0x390 [videobuf2_common] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&q->mmap_lock){+.+.}-{3:3}: __mutex_lock_common+0xcc/0xb88 mutex_lock_nested+0x5c/0x68 vb2_mmap+0xf4/0x290 [videobuf2_common] v4l2_m2m_fop_mmap+0x44/0x50 [v4l2_mem2mem] v4l2_mmap+0x5c/0xa4 mmap_region+0x310/0x5a4 do_mmap+0x348/0x43c vm_mmap_pgoff+0xfc/0x178 ksys_mmap_pgoff+0x84/0xfc __arm64_compat_sys_aarch32_mmap2+0x2c/0x38 invoke_syscall+0x54/0x110 el0_svc_common+0x88/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 -> #4 (&mm->mmap_lock){++++}-{3:3}: __might_fault+0x60/0x88 filldir64+0x124/0x3a0 dcache_readdir+0x7c/0x1ec iterate_dir+0xc4/0x184 __arm64_sys_getdents64+0x78/0x170 invoke_syscall+0x54/0x110 el0_svc_common+0xa8/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 -> #3 (&sb->s_type->i_mutex_key#3){++++}-{3:3}: down_write+0x94/0x1f4 start_creating+0xb0/0x174 debugfs_create_dir+0x28/0x138 opp_debug_register+0x88/0xc0 _add_opp_dev+0x84/0x9c _add_opp_table_indexed+0x16c/0x310 _of_add_table_indexed+0x70/0xb5c dev_pm_opp_of_add_table_indexed+0x20/0x2c of_genpd_add_provider_onecell+0xc4/0x1c8 rpmhpd_probe+0x21c/0x278 platform_probe+0xb4/0xd4 really_probe+0x140/0x35c driver_probe_device+0x90/0xcc __device_attach_driver+0xa4/0xc0 bus_for_each_drv+0x8c/0xd8 __device_attach+0xc4/0x150 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 device_add+0x22c/0x3fc of_device_add+0x44/0x54 of_platform_device_create_pdata+0xb0/0xf4 of_platform_bus_create+0x1d0/0x350 of_platform_populate+0x80/0xd4 devm_of_platform_populate+0x64/0xb0 rpmh_rsc_probe+0x378/0x3dc platform_probe+0xb4/0xd4 really_probe+0x140/0x35c driver_probe_device+0x90/0xcc __device_attach_driver+0xa4/0xc0 bus_for_each_drv+0x8c/0xd8 __device_attach+0xc4/0x150 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 device_add+0x22c/0x3fc of_device_add+0x44/0x54 of_platform_device_create_pdata+0xb0/0xf4 of_platform_bus_create+0x1d0/0x350 of_platform_bus_create+0x21c/0x350 of_platform_populate+0x80/0xd4 of_platform_default_populate_init+0xb8/0xd4 do_one_initcall+0x1b4/0x400 do_initcall_level+0xa8/0xc8 do_initcalls+0x5c/0x9c do_basic_setup+0x2c/0x38 kernel_init_freeable+0x1a4/0x1ec kernel_init+0x20/0x118 ret_from_fork+0x10/0x30 -> #2 (gpd_list_lock){+.+.}-{3:3}: __mutex_lock_common+0xcc/0xb88 mutex_lock_nested+0x5c/0x68 __genpd_dev_pm_attach+0x70/0x18c genpd_dev_pm_attach_by_id+0xe4/0x158 genpd_dev_pm_attach_by_name+0x48/0x60 dev_pm_domain_attach_by_name+0x2c/0x38 dev_pm_opp_attach_genpd+0xac/0x160 vcodec_domains_get+0x94/0x14c [venus_core] core_get_v4+0x150/0x188 [venus_core] venus_probe+0x138/0x444 [venus_core] platform_probe+0xb4/0xd4 really_probe+0x140/0x35c driver_probe_device+0x90/0xcc device_driver_attach+0x58/0x7c __driver_attach+0xc8/0xe0 bus_for_each_dev+0x88/0xd4 driver_attach+0x30/0x3c bus_add_driver+0x10c/0x1e0 driver_register+0x70/0x108 __platform_driver_register+0x30/0x3c 0xffffffde113e1044 do_one_initcall+0x1b4/0x400 do_init_module+0x64/0x1fc load_module+0x17f4/0x1958 __arm64_sys_finit_module+0xb4/0xf0 invoke_syscall+0x54/0x110 el0_svc_common+0x88/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 -> #1 (&opp_table->genpd_virt_dev_lock){+.+.}-{3:3}: __mutex_lock_common+0xcc/0xb88 mutex_lock_nested+0x5c/0x68 _set_required_opps+0x74/0x120 _set_opp+0x94/0x37c dev_pm_opp_set_rate+0xa0/0x194 core_clks_set_rate+0x28/0x58 [venus_core] load_scale_v4+0x228/0x2b4 [venus_core] session_process_buf+0x160/0x198 [venus_core] venus_helper_vb2_buf_queue+0xcc/0x130 [venus_core] vdec_vb2_buf_queue+0xc4/0x140 [venus_dec] __enqueue_in_driver+0x164/0x188 [videobuf2_common] vb2_core_qbuf+0x13c/0x47c [videobuf2_common] vb2_qbuf+0x88/0xec [videobuf2_v4l2] v4l2_m2m_qbuf+0x84/0x15c [v4l2_mem2mem] v4l2_m2m_ioctl_qbuf+0x24/0x30 [v4l2_mem2mem] v4l_qbuf+0x54/0x68 __video_do_ioctl+0x2bc/0x3bc video_usercopy+0x558/0xb04 video_ioctl2+0x24/0x30 v4l2_ioctl+0x58/0x68 v4l2_compat_ioctl32+0x84/0xa0 __arm64_compat_sys_ioctl+0x12c/0x140 invoke_syscall+0x54/0x110 el0_svc_common+0x88/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 -> #0 (&inst->lock#3){+.+.}-{3:3}: __lock_acquire+0x248c/0x2d6c lock_acquire+0x240/0x314 __mutex_lock_common+0xcc/0xb88 mutex_lock_nested+0x5c/0x68 vdec_buf_cleanup+0x3c/0x17c [venus_dec] __vb2_queue_free+0x98/0x204 [videobuf2_common] vb2_core_reqbufs+0x14c/0x390 [videobuf2_common] vb2_reqbufs+0x58/0x74 [videobuf2_v4l2] v4l2_m2m_reqbufs+0x58/0x90 [v4l2_mem2mem] v4l2_m2m_ioctl_reqbufs+0x24/0x30 [v4l2_mem2mem] v4l_reqbufs+0x58/0x6c __video_do_ioctl+0x2bc/0x3bc video_usercopy+0x558/0xb04 video_ioctl2+0x24/0x30 v4l2_ioctl+0x58/0x68 v4l2_compat_ioctl32+0x84/0xa0 __arm64_compat_sys_ioctl+0x12c/0x140 invoke_syscall+0x54/0x110 el0_svc_common+0x88/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 other info that might help us debug this: Chain exists of: &inst->lock#3 --> &mm->mmap_lock --> &q->mmap_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->mmap_lock); lock(&mm->mmap_lock); lock(&q->mmap_lock); lock(&inst->lock#3); *** DEADLOCK *** 1 lock held by ThreadPoolSingl/3969: #0: ffffff80d3c3c4f8 (&q->mmap_lock){+.+.}-{3:3}, at: vb2_core_reqbufs+0xe4/0x390 [videobuf2_common] stack backtrace: CPU: 2 PID: 3969 Comm: ThreadPoolSingl Not tainted 5.13.0-rc2 torvalds#71 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Call trace: dump_backtrace+0x0/0x1b4 show_stack+0x24/0x30 dump_stack+0xe0/0x15c print_circular_bug+0x32c/0x388 check_noncircular+0x138/0x140 __lock_acquire+0x248c/0x2d6c lock_acquire+0x240/0x314 __mutex_lock_common+0xcc/0xb88 mutex_lock_nested+0x5c/0x68 vdec_buf_cleanup+0x3c/0x17c [venus_dec] __vb2_queue_free+0x98/0x204 [videobuf2_common] vb2_core_reqbufs+0x14c/0x390 [videobuf2_common] vb2_reqbufs+0x58/0x74 [videobuf2_v4l2] v4l2_m2m_reqbufs+0x58/0x90 [v4l2_mem2mem] v4l2_m2m_ioctl_reqbufs+0x24/0x30 [v4l2_mem2mem] v4l_reqbufs+0x58/0x6c __video_do_ioctl+0x2bc/0x3bc video_usercopy+0x558/0xb04 video_ioctl2+0x24/0x30 v4l2_ioctl+0x58/0x68 v4l2_compat_ioctl32+0x84/0xa0 __arm64_compat_sys_ioctl+0x12c/0x140 invoke_syscall+0x54/0x110 el0_svc_common+0x88/0xf0 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x24/0x34 el0_sync_compat_handler+0xc0/0xf0 el0_sync_compat+0x19c/0x1c0 The 'gpd_list_lock' is nominally named as such to protect the 'gpd_list' from concurrent access and mutation. Unfortunately, holding that mutex around various OPP framework calls leads to lockdep splats because now we're doing various operations in OPP core such as registering with debugfs while holding the list lock. We don't need to hold any list mutex while we're calling into OPP, so let's shrink the locking area of the 'gpd_list_lock' so that lockdep isn't triggered. This also helps reduce contention on this lock, which probably doesn't matter much but at least is nice to have. Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-pm@vger.kernel.org> Cc: Viresh Kumar <vireshk@kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fixes a checkpatch warning: WARNING: It's generally not useful to have the filename in the file #3: FILE: drivers/reset/reset-oxnas.c:3: + * drivers/reset/reset-oxnas.c Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fabian Hemmer <copy@copy.sh> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Patch series "Add build ID to stacktraces", v6. This series adds the kernel's build ID[1] to the stacktrace header printed in oops messages, warnings, etc. and the build ID for any module that appears in the stacktrace after the module name. The goal is to make the stacktrace more self-contained and descriptive by including the relevant build IDs in the kernel logs when something goes wrong. This can be used by post processing tools like script/decode_stacktrace.sh and kernel developers to easily locate the debug info associated with a kernel crash and line up what line and file things started falling apart at. To show how this can be used I've included a patch to decode_stacktrace.sh that downloads the debuginfo from a debuginfod server. This also includes some patches to make the buildid.c file use more const arguments and consolidate logic into buildid.c from kdump. These are left to the end as they were mostly cleanup patches. Here's an example lkdtm stacktrace on arm64. WARNING: CPU: 4 PID: 3255 at drivers/misc/lkdtm/bugs.c:83 lkdtm_WARNING+0x28/0x30 [lkdtm] Modules linked in: lkdtm rfcomm algif_hash algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE CPU: 4 PID: 3255 Comm: bash Not tainted 5.11 #3 aa23f7a1231c229de205662d5a9e0d4c580f19a1 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO BTYPE=--) pc : lkdtm_WARNING+0x28/0x30 [lkdtm] lr : lkdtm_do_action+0x24/0x40 [lkdtm] sp : ffffffc0134fbca0 x29: ffffffc0134fbca0 x28: ffffff92d53ba240 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffffffe3622352c0 x23: 0000000000000020 x22: ffffffe362233366 x21: ffffffe3622352e0 x20: ffffffc0134fbde0 x19: 0000000000000008 x18: 0000000000000000 x17: ffffff929b6536fc x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000012 x13: ffffffe380ed892c x12: ffffffe381d05068 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000001 x8 : ffffffe362237000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000008 x2 : ffffff93fef25a70 x1 : ffffff93fef15788 x0 : ffffffe3622352e0 Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm ed5019fdf5e53be37cb1ba7899292d7e143b259e] direct_entry+0x16c/0x1b4 [lkdtm ed5019fdf5e53be37cb1ba7899292d7e143b259e] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 ksys_write+0x84/0xf0 __arm64_sys_write+0x24/0x30 el0_svc_common+0xf4/0x1c0 do_el0_svc_compat+0x28/0x3c el0_svc_compat+0x10/0x1c el0_sync_compat_handler+0xa8/0xcc el0_sync_compat+0x178/0x180 ---[ end trace 3d95032303e59e68 ]--- This patch (of 13): Some kernel elf files have various notes that also happen to have an elf note type of '3', which matches NT_GNU_BUILD_ID but the note name isn't "GNU". For example, this note trips up the existing logic: Owner Data size Description Xen 0x00000008 Unknown note type: (0x00000003) description data: 00 00 00 ffffff80 ffffffff ffffffff ffffffff ffffffff Let's make sure that it is a GNU note when parsing the build ID so that we can use this function to parse a vmlinux's build ID too. Link: https://lkml.kernel.org/r/20210511003845.2429846-1-swboyd@chromium.org Link: https://lkml.kernel.org/r/20210511003845.2429846-2-swboyd@chromium.org Fixes: bd7525d ("bpf: Move stack_map_get_build_id into lib") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reported-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the running kernel's build ID[1] to the stacktrace information header. This makes it simpler for developers to locate the vmlinux with full debuginfo for a particular kernel stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the correct vmlinux from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace. This is especially useful for pstore crash debugging where the kernel crashes are recorded in the pstore logs and the recovery kernel is different or the debuginfo doesn't exist on the device due to space concerns (the data can be large and a security concern). The stacktrace can be analyzed after the crash by using the build ID to find the matching vmlinux and understand where in the function something went wrong. Example stacktrace from lkdtm: WARNING: CPU: 4 PID: 3255 at drivers/misc/lkdtm/bugs.c:83 lkdtm_WARNING+0x28/0x30 [lkdtm] Modules linked in: lkdtm rfcomm algif_hash algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE CPU: 4 PID: 3255 Comm: bash Not tainted 5.11 #3 aa23f7a1231c229de205662d5a9e0d4c580f19a1 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO BTYPE=--) pc : lkdtm_WARNING+0x28/0x30 [lkdtm] The hex string aa23f7a1231c229de205662d5a9e0d4c580f19a1 is the build ID, following the kernel version number. Put it all behind a config option, STACKTRACE_BUILD_ID, so that kernel developers can remove this information if they decide it is too much. Link: https://lkml.kernel.org/r/20210511003845.2429846-5-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 7b1f8c6 ] In the step #3 of check_irq_usage(), we seach backwards to find a lock whose usage conflicts the usage of @target_entry1 on safe/unsafe. However, we should only keep the irq-unsafe usage of @target_entry1 into consideration, because it could be a case where a lock is hardirq-unsafe but soft-safe, and in check_irq_usage() we find it because its hardirq-unsafe could result into a hardirq-safe-unsafe deadlock, but currently since we don't filter out the other usage bits, so we may find a lock dependency path softirq-unsafe -> softirq-safe, which in fact doesn't cause a deadlock. And this may cause misleading lockdep splats. Fix this by only keeping LOCKF_ENABLED_IRQ_ALL bits when we try the backwards search. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210618170110.3699115-4-boqun.feng@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

The third power supply had an I2C address conflict with another device in the system. The device will have the address changed from 6Ah to 6Dh. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210610202940.3650554-1-bjwyman@gmail.com Fixes: d66d720 ("ARM: dts: aspeed: everest: Add power supply i2c devices") Signed-off-by: Joel Stanley <joel@jms.id.au>

The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178 ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com

…linux/kernel/git/joel/bmc into arm/fixes ASPEED device tree fixes for 5.14 - eMMC phase corrections so Tacoma and Everest can boot - VUART irq polarity fix for e3c246d4i, using new bindings - I2C address fix for Rainier power supply - GPIO line name fixes * tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: PSU #3 address change ARM: dts: everest: Add phase corrections for eMMC ARM: dts: tacoma: Add phase corrections for eMMC ARM: dts: aspeed: Update e3c246d4i vuart properties ARM: dts: aspeed: Fix AST2600 machines line names Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

commit 0af7782 upstream. The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178 ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a NULL value as the transaction handle argument, which makes that function take the commit_root_sem semaphore, which is necessary when we don't hold a transaction handle or any other mechanism to prevent a transaction commit from wiping out commit roots. However btrfs_qgroup_trace_extent_post() can be called in a context where we are holding a write lock on an extent buffer from a subvolume tree, namely from btrfs_truncate_inode_items(), called either during truncate or unlink operations. In this case we end up with a lock inversion problem because the commit_root_sem is a higher level lock, always supposed to be acquired before locking any extent buffer. Lockdep detects this lock inversion problem since we switched the extent buffer locks from custom locks to semaphores, and when running btrfs/158 from fstests, it reported the following trace: [ 9057.626435] ====================================================== [ 9057.627541] WARNING: possible circular locking dependency detected [ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted [ 9057.628961] ------------------------------------------------------ [ 9057.629867] kworker/u16:4/30781 is trying to acquire lock: [ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.632542] but task is already holding lock: [ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.635255] which lock already depends on the new lock. [ 9057.636292] the existing dependency chain (in reverse order) is: [ 9057.637240] -> #1 (&fs_info->commit_root_sem){++++}-{3:3}: [ 9057.638138] down_read+0x46/0x140 [ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs] [ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] [ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs] [ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs] [ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs] [ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs] [ 9057.643418] evict+0xcf/0x1d0 [ 9057.643895] do_unlinkat+0x1e9/0x300 [ 9057.644525] do_syscall_64+0x3b/0xc0 [ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 9057.645835] -> #0 (btrfs-tree-00){++++}-{3:3}: [ 9057.646600] __lock_acquire+0x130e/0x2210 [ 9057.647248] lock_acquire+0xd7/0x310 [ 9057.647773] down_read_nested+0x4b/0x140 [ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.655831] process_one_work+0x247/0x5a0 [ 9057.656425] worker_thread+0x55/0x3c0 [ 9057.656993] kthread+0x155/0x180 [ 9057.657494] ret_from_fork+0x22/0x30 [ 9057.658030] other info that might help us debug this: [ 9057.659064] Possible unsafe locking scenario: [ 9057.659824] CPU0 CPU1 [ 9057.660402] ---- ---- [ 9057.660988] lock(&fs_info->commit_root_sem); [ 9057.661581] lock(btrfs-tree-00); [ 9057.662348] lock(&fs_info->commit_root_sem); [ 9057.663254] lock(btrfs-tree-00); [ 9057.663690] *** DEADLOCK *** [ 9057.664437] 4 locks held by kworker/u16:4/30781: [ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs] [ 9057.669017] #3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.670408] stack backtrace: [ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1 [ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [ 9057.674258] Call Trace: [ 9057.674588] dump_stack_lvl+0x57/0x72 [ 9057.675083] check_noncircular+0xf3/0x110 [ 9057.675611] __lock_acquire+0x130e/0x2210 [ 9057.676132] lock_acquire+0xd7/0x310 [ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.677313] ? lock_is_held_type+0xe8/0x140 [ 9057.677849] down_read_nested+0x4b/0x140 [ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.681083] ? _raw_spin_unlock+0x29/0x40 [ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs] [ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.685977] ? ___ratelimit+0xa4/0x110 [ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.688649] ? lock_is_held_type+0xe8/0x140 [ 9057.689180] process_one_work+0x247/0x5a0 [ 9057.689696] worker_thread+0x55/0x3c0 [ 9057.690175] ? process_one_work+0x5a0/0x5a0 [ 9057.690731] kthread+0x155/0x180 [ 9057.691158] ? set_kthread_struct+0x40/0x40 [ 9057.691697] ret_from_fork+0x22/0x30 Fix this by making btrfs_find_all_roots() never attempt to lock the commit_root_sem when it is called from btrfs_qgroup_trace_extent_post(). We can't just pass a non-NULL transaction handle to btrfs_find_all_roots() from btrfs_qgroup_trace_extent_post(), because that would make backref lookup not use commit roots and acquire read locks on extent buffers, and therefore could deadlock when btrfs_qgroup_trace_extent_post() is called from the btrfs_truncate_inode_items() code path which has acquired a write lock on an extent buffer of the subvolume btree. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

commit 8949b9a upstream. At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a NULL value as the transaction handle argument, which makes that function take the commit_root_sem semaphore, which is necessary when we don't hold a transaction handle or any other mechanism to prevent a transaction commit from wiping out commit roots. However btrfs_qgroup_trace_extent_post() can be called in a context where we are holding a write lock on an extent buffer from a subvolume tree, namely from btrfs_truncate_inode_items(), called either during truncate or unlink operations. In this case we end up with a lock inversion problem because the commit_root_sem is a higher level lock, always supposed to be acquired before locking any extent buffer. Lockdep detects this lock inversion problem since we switched the extent buffer locks from custom locks to semaphores, and when running btrfs/158 from fstests, it reported the following trace: [ 9057.626435] ====================================================== [ 9057.627541] WARNING: possible circular locking dependency detected [ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted [ 9057.628961] ------------------------------------------------------ [ 9057.629867] kworker/u16:4/30781 is trying to acquire lock: [ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.632542] but task is already holding lock: [ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.635255] which lock already depends on the new lock. [ 9057.636292] the existing dependency chain (in reverse order) is: [ 9057.637240] -> #1 (&fs_info->commit_root_sem){++++}-{3:3}: [ 9057.638138] down_read+0x46/0x140 [ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs] [ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] [ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs] [ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs] [ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs] [ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs] [ 9057.643418] evict+0xcf/0x1d0 [ 9057.643895] do_unlinkat+0x1e9/0x300 [ 9057.644525] do_syscall_64+0x3b/0xc0 [ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 9057.645835] -> #0 (btrfs-tree-00){++++}-{3:3}: [ 9057.646600] __lock_acquire+0x130e/0x2210 [ 9057.647248] lock_acquire+0xd7/0x310 [ 9057.647773] down_read_nested+0x4b/0x140 [ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.655831] process_one_work+0x247/0x5a0 [ 9057.656425] worker_thread+0x55/0x3c0 [ 9057.656993] kthread+0x155/0x180 [ 9057.657494] ret_from_fork+0x22/0x30 [ 9057.658030] other info that might help us debug this: [ 9057.659064] Possible unsafe locking scenario: [ 9057.659824] CPU0 CPU1 [ 9057.660402] ---- ---- [ 9057.660988] lock(&fs_info->commit_root_sem); [ 9057.661581] lock(btrfs-tree-00); [ 9057.662348] lock(&fs_info->commit_root_sem); [ 9057.663254] lock(btrfs-tree-00); [ 9057.663690] *** DEADLOCK *** [ 9057.664437] 4 locks held by kworker/u16:4/30781: [ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs] [ 9057.669017] #3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.670408] stack backtrace: [ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1 [ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [ 9057.674258] Call Trace: [ 9057.674588] dump_stack_lvl+0x57/0x72 [ 9057.675083] check_noncircular+0xf3/0x110 [ 9057.675611] __lock_acquire+0x130e/0x2210 [ 9057.676132] lock_acquire+0xd7/0x310 [ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.677313] ? lock_is_held_type+0xe8/0x140 [ 9057.677849] down_read_nested+0x4b/0x140 [ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.681083] ? _raw_spin_unlock+0x29/0x40 [ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs] [ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.685977] ? ___ratelimit+0xa4/0x110 [ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.688649] ? lock_is_held_type+0xe8/0x140 [ 9057.689180] process_one_work+0x247/0x5a0 [ 9057.689696] worker_thread+0x55/0x3c0 [ 9057.690175] ? process_one_work+0x5a0/0x5a0 [ 9057.690731] kthread+0x155/0x180 [ 9057.691158] ? set_kthread_struct+0x40/0x40 [ 9057.691697] ret_from_fork+0x22/0x30 Fix this by making btrfs_find_all_roots() never attempt to lock the commit_root_sem when it is called from btrfs_qgroup_trace_extent_post(). We can't just pass a non-NULL transaction handle to btrfs_find_all_roots() from btrfs_qgroup_trace_extent_post(), because that would make backref lookup not use commit roots and acquire read locks on extent buffers, and therefore could deadlock when btrfs_qgroup_trace_extent_post() is called from the btrfs_truncate_inode_items() code path which has acquired a write lock on an extent buffer of the subvolume btree. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ torvalds#251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

…rary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. Because it is not in kernel address space it is not covered by KASAN shadow memory. Since commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports bad accesses from copy_to_kernel_nofault(). Here a bad access to user memory is reported because KASAN detects the lack of shadow memory and the address is below TASK_SIZE. Do like x86 in commit b3fd8e8 ("x86/alternatives: Use temporary mm for text poking") and disable KASAN reports during patching when using temporary mm. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Close: https://lore.kernel.org/all/20250201151435.48400261@yea/ Fixes: 465cabc ("powerpc/code-patching: introduce patch_instructions()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #3 - Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout. - Bring back the VMID allocation to the vcpu_load phase, ensuring that we only setup VTTBR_EL2 once on VHE. This cures an ugly race that would lead to running with an unallocated VMID.

Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee10000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

…cal section A circular lock dependency splat has been seen involving down_trylock(): ====================================================== WARNING: possible circular locking dependency detected 6.12.0-41.el10.s390x+debug ------------------------------------------------------ dd/32479 is trying to acquire lock: 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 but task is already holding lock: 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> #4 (&zone->lock){-.-.}-{2:2}: -> #3 (hrtimer_bases.lock){-.-.}-{2:2}: -> #2 (&rq->__lock){-.-.}-{2:2}: -> #1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console_sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. -> #4 (&zone->lock){-.-.}-{2:2}: __lock_acquire+0xe86/0x1cc0 lock_acquire.part.0+0x258/0x630 lock_acquire+0xb8/0xe0 _raw_spin_lock_irqsave+0xb4/0x120 rmqueue_bulk+0xac/0x8f0 __rmqueue_pcplist+0x580/0x830 rmqueue_pcplist+0xfc/0x470 rmqueue.isra.0+0xdec/0x11b0 get_page_from_freelist+0x2ee/0xeb0 __alloc_pages_noprof+0x2c2/0x520 alloc_pages_mpol_noprof+0x1fc/0x4d0 alloc_pages_noprof+0x8c/0xe0 allocate_slab+0x320/0x460 ___slab_alloc+0xa58/0x12b0 __slab_alloc.isra.0+0x42/0x60 kmem_cache_alloc_noprof+0x304/0x350 fill_pool+0xf6/0x450 debug_object_activate+0xfe/0x360 enqueue_hrtimer+0x34/0x190 __run_hrtimer+0x3c8/0x4c0 __hrtimer_run_queues+0x1b2/0x260 hrtimer_interrupt+0x316/0x760 do_IRQ+0x9a/0xe0 do_irq_async+0xf6/0x160 Normally a raw_spinlock to spinlock dependency is not legitimate and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legitimate and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com

When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c55 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reported-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/ Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>

When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 Fixes: 3699589 ("wifi: mwifiex: add host mlme for client mode") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>

alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [harry.yoo@oracle.com: v3] Link: https://lkml.kernel.org/r/20250624072513.84219-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250620195305.1115151-1-harry.yoo@oracle.com Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init") Fixes: 1438d34 ("lib: add memory allocations report in show_mem()") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202506181351.bba867dd-lkp@intel.com Acked-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Raghavendra K T <raghavendra.kt@amd.com> Cc: Casey Chen <cachen@purestorage.com> Cc: David Wang <00107082@163.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Yuanyuan Zhong <yzhong@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 torvalds#305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: stable@vger.kernel.org # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com> Signed-off-by: Sheng Yong <shengyong1@xiaomi.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free. race condition: cpu 0 | cpu 1 atalk_sendmsg() | atif_proxy_probe_device() aarp_send_ddp() | aarp_proxy_probe_network() mod_timer() | lock(aarp_lock) // LOCK!! timeout around 200ms | alloc(aarp_entry) and then call | proxies[hash] = aarp_entry aarp_expire_timeout() | aarp_send_probe() | unlock(aarp_lock) // UNLOCK!! lock(aarp_lock) // LOCK!! | msleep(100); __aarp_expire_timer(&proxies[ct]) | free(aarp_entry) | unlock(aarp_lock) // UNLOCK!! | | lock(aarp_lock) // LOCK!! | UAF aarp_entry !! ================================================================== BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 Read of size 4 at addr ffff8880123aa360 by task repro/13278 CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc1/0x630 mm/kasan/report.c:521 kasan_report+0xca/0x100 mm/kasan/report.c:634 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 sock_do_ioctl+0xdc/0x260 net/socket.c:1190 sock_ioctl+0x239/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated: aarp_alloc net/appletalk/aarp.c:382 [inline] aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 Freed: kfree+0x148/0x4d0 mm/slub.c:4841 __aarp_expire net/appletalk/aarp.c:90 [inline] __aarp_expire_timer net/appletalk/aarp.c:261 [inline] aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317 The buggy address belongs to the object at ffff8880123aa300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 96 bytes inside of freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0) Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com> Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. Cc: stable@vger.kernel.org Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ #10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the snd_utimer_create() function, if the kasprintf() function return NULL, snd_utimer_put_id() will be called, finally use ida_free() to free the unallocated id 0. the syzkaller reported the following information: ------------[ cut here ]------------ ida_free called for id=0 which is not allocated. WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/idr.c:592 Modules linked in: CPU: 1 UID: 0 PID: 1286 Comm: syz-executor164 Not tainted 6.15.8 #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 RIP: 0010:ida_free+0x1fd/0x2f0 lib/idr.c:592 Code: f8 fc 41 83 fc 3e 76 69 e8 70 b2 f8 (...) RSP: 0018:ffffc900007f79c8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 1ffff920000fef3b RCX: ffffffff872176a5 RDX: ffff88800369d200 RSI: 0000000000000000 RDI: ffff88800369d200 RBP: 0000000000000000 R08: ffffffff87ba60a5 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f6f1abc1740(0000) GS:ffff8880d76a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f1ad7a784 CR3: 000000007a6e2000 CR4: 00000000000006f0 Call Trace: <TASK> snd_utimer_put_id sound/core/timer.c:2043 [inline] [snd_timer] snd_utimer_create+0x59b/0x6a0 sound/core/timer.c:2184 [snd_timer] snd_utimer_ioctl_create sound/core/timer.c:2202 [inline] [snd_timer] __snd_timer_user_ioctl.isra.0+0x724/0x1340 sound/core/timer.c:2287 [snd_timer] snd_timer_user_ioctl+0x75/0xc0 sound/core/timer.c:2298 [snd_timer] vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x198/0x200 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x7b/0x160 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] The utimer->id should be set properly before the kasprintf() function, ensures the snd_utimer_put_id() function will free the allocated id. Fixes: 3774591 ("ALSA: timer: Introduce virtual userspace-driven timers") Signed-off-by: Dewei Meng <mengdewei@cqsoftware.com.cn> Link: https://patch.msgid.link/20250821014317.40786-1-mengdewei@cqsoftware.com.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a trailing byte, making the actual length is one more byte than the structs defined. It caused stack-out-of-bounds and kernel crash: kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75 kernel: kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary) kernel: Workqueue: async async_run_entry_fn kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x76/0xa0 kernel: print_report+0xd1/0x660 kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kernel: ? __kasan_slab_free+0x5d/0x80 kernel: ? kasan_addr_to_slab+0xd/0xb0 kernel: kasan_report+0xe1/0x120 kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: kasan_check_range+0x11c/0x200 kernel: __asan_memcpy+0x3b/0x80 kernel: quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c] kernel: quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c] [...] kernel: </TASK> kernel: kernel: The buggy address belongs to stack of task kworker/u33:2/75 kernel: and is located at offset 48 in frame: kernel: quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c] kernel: kernel: This frame has 3 objects: kernel: [32, 36) 'hid_desc_addr' kernel: [48, 59) 'i2c_param' kernel: [80, 224) 'i2c_config' ACPI DSD methods return: \_SB.PC00.THC0.ICRS Buffer 000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00 \_SB.PC00.THC0.ISUB Buffer 00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00 Adding reserved padding to quicki2c_subip_acpi_parameter/config. Fixes: 5282e45 ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Even Xu <even.xu@intel.com> Tested-by: Even Xu <even.xu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>

…C regs save Improper use of secondary pointer (&dev->i2c_subip_regs) caused kernel crash and out-of-bounds error: BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary) Workqueue: async async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x660 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x26/0x200 kasan_report+0xe1/0x120 ? _regmap_bulk_read+0x449/0x510 ? _regmap_bulk_read+0x449/0x510 __asan_report_store4_noabort+0x17/0x30 _regmap_bulk_read+0x449/0x510 ? __pfx__regmap_bulk_read+0x10/0x10 regmap_bulk_read+0x270/0x3d0 pio_complete+0x1ee/0x2c0 [intel_thc] ? __pfx_pio_complete+0x10/0x10 [intel_thc] ? __pfx_pio_wait+0x10/0x10 [intel_thc] ? regmap_update_bits_base+0x13b/0x1f0 thc_i2c_subip_pio_read+0x117/0x270 [intel_thc] thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc] ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc] [...] The buggy address belongs to the object at ffff888136005d00 which belongs to the cache kmalloc-rnd-12-192 of size 192 The buggy address is located 0 bytes to the right of allocated 192-byte region [ffff888136005d00, ffff888136005dc0) Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure safe memory access. Fixes: 4228966 ("HID: intel-thc-hid: intel-thc: Add THC I2C config interfaces") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Even Xu <even.xu@intel.com> Tested-by: Even Xu <even.xu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40 [...] Fixes: c8000de ("HID: multitouch: Add support for GT7868Q") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>

When a large VM, specifically one that holds a significant number of PTEs, gets abruptly destroyed, the following warning is seen during the page-table walk: sched: CPU 0 need_resched set for > 100018840 ns (100 ticks) without schedule CPU: 0 UID: 0 PID: 9617 Comm: kvm_page_table_ Tainted: G O 6.16.0-smp-DEV #3 NONE Tainted: [O]=OOT_MODULE Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x3c/0xb8 dump_stack+0x18/0x30 resched_latency_warn+0x7c/0x88 sched_tick+0x1c4/0x268 update_process_times+0xa8/0xd8 tick_nohz_handler+0xc8/0x168 __hrtimer_run_queues+0x11c/0x338 hrtimer_interrupt+0x104/0x308 arch_timer_handler_phys+0x40/0x58 handle_percpu_devid_irq+0x8c/0x1b0 generic_handle_domain_irq+0x48/0x78 gic_handle_irq+0x1b8/0x408 call_on_irq_stack+0x24/0x30 do_interrupt_handler+0x54/0x78 el1_interrupt+0x44/0x88 el1h_64_irq_handler+0x18/0x28 el1h_64_irq+0x84/0x88 stage2_free_walker+0x30/0xa0 (P) __kvm_pgtable_walk+0x11c/0x258 __kvm_pgtable_walk+0x180/0x258 __kvm_pgtable_walk+0x180/0x258 __kvm_pgtable_walk+0x180/0x258 kvm_pgtable_walk+0xc4/0x140 kvm_pgtable_stage2_destroy+0x5c/0xf0 kvm_free_stage2_pgd+0x6c/0xe8 kvm_uninit_stage2_mmu+0x24/0x48 kvm_arch_flush_shadow_all+0x80/0xa0 kvm_mmu_notifier_release+0x38/0x78 __mmu_notifier_release+0x15c/0x250 exit_mmap+0x68/0x400 __mmput+0x38/0x1c8 mmput+0x30/0x68 exit_mm+0xd4/0x198 do_exit+0x1a4/0xb00 do_group_exit+0x8c/0x120 get_signal+0x6d4/0x778 do_signal+0x90/0x718 do_notify_resume+0x70/0x170 el0_svc+0x74/0xd8 el0t_64_sync_handler+0x60/0xc8 el0t_64_sync+0x1b0/0x1b8 The warning is seen majorly on the host kernels that are configured not to force-preempt, such as CONFIG_PREEMPT_NONE=y. To avoid this, instead of walking the entire page-table in one go, split it into smaller ranges, by checking for cond_resched() between each range. Since the path is executed during VM destruction, after the page-table structure is unlinked from the KVM MMU, relying on cond_resched_rwlock_write() isn't necessary. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Suggested-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250820162242.2624752-3-rananta@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== vxlan: Fix NPDs when using nexthop objects With FDB nexthop groups, VXLAN FDB entries do not necessarily point to a remote destination but rather to an FDB nexthop group. This means that first_remote_{rcu,rtnl}() can return NULL and a few places in the driver were not ready for that, resulting in NULL pointer dereferences. Patches #1-#2 fix these NPDs. Note that vxlan_fdb_find_uc() still dereferences the remote returned by first_remote_rcu() without checking that it is not NULL, but this function is only invoked by a single driver which vetoes the creation of FDB nexthop groups. I will patch this in net-next to make the code less fragile. Patch #3 adds a selftests which exercises these code paths and tests basic Tx functionality with FDB nexthop groups. I verified that the test crashes the kernel without the first two patches. ==================== Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #3 - Invalidate nested MMUs upon freeing the PGD to avoid WARNs when visiting from an MMU notifier - Fixes to the TLB match process and TLB invalidation range for managing the VCNR pseudo-TLB - Prevent SPE from erroneously profiling guests due to UNKNOWN reset values in PMSCR_EL1 - Fix save/restore of host MDCR_EL2 to account for eagerly programming at vcpu_load() on VHE systems - Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios where an xarray's spinlock was nested with a *raw* spinlock - Permit stage-2 read permission aborts which are possible in the case of NV depending on the guest hypervisor's stage-2 translation - Call raw_spin_unlock() instead of the internal spinlock API - Fix parameter ordering when assigning VBAR_EL1

This fixes the following UAF caused by not properly locking hdev when processing HCI_EV_NUM_COMP_PKTS: BUG: KASAN: slab-use-after-free in hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 Read of size 4 at addr ffff8880740f0940 by task kworker/u11:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u11:0 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci1 hci_rx_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036 hci_num_comp_pkts_evt+0x1c8/0xa50 net/bluetooth/hci_event.c:4404 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 le_conn_complete_evt+0x3d6/0x1220 net/bluetooth/hci_event.c:5628 hci_le_enh_conn_complete_evt+0x189/0x470 net/bluetooth/hci_event.c:5794 hci_event_func net/bluetooth/hci_event.c:7474 [inline] hci_event_packet+0x78c/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Freed by task 9572: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_abort_conn_sync+0x5d1/0xdf0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: 134f4b3 ("Bluetooth: add support for skb TX SND/COMPLETION timestamping") Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following UFA in hci_acl_create_conn_sync where a connection still pending is command submission (conn->state == BT_OPEN) maybe freed, also since this also can happen with the likes of hci_le_create_conn_sync fix it as well: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541 CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci3 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 123736: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline] hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634 pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x54b/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 103680: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Last potentially related work creation: kasan_save_stack+0x3e/0x60 mm/kasan/common.c:47 kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:548 insert_work+0x3d/0x330 kernel/workqueue.c:2183 __queue_work+0xbd9/0xfe0 kernel/workqueue.c:2345 queue_delayed_work_on+0x18b/0x280 kernel/workqueue.c:2561 pairing_complete+0x1e7/0x2b0 net/bluetooth/mgmt.c:3451 pairing_complete_cb+0x1ac/0x230 net/bluetooth/mgmt.c:3487 hci_connect_cfm include/net/bluetooth/hci_core.h:2064 [inline] hci_conn_failed+0x24d/0x310 net/bluetooth/hci_conn.c:1275 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Fixes: aef2aa4 ("Bluetooth: hci_event: Fix creating hci_conn object on error status") Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Ido Schimmel says: ==================== nexthop: Various fixes Patch #1 fixes a NPD that was recently reported by syzbot. Patch #2 fixes an issue in the existing FIB nexthop selftest. Patch #3 extends the selftest with test cases for the bug that was fixed in the first patch. ==================== Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

esmil force-pushed the starlight branch 2 times, most recently from 060f811 to 5ef2cd6 Compare May 11, 2021 16:54

esmil closed this May 11, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

riscv: dts: starfive: jh7100: Refer to labels from aliases #3

riscv: dts: starfive: jh7100: Refer to labels from aliases #3

Uh oh!

geertu commented May 11, 2021

Uh oh!

esmil commented May 11, 2021

Uh oh!

geertu commented May 11, 2021

Uh oh!

esmil commented May 11, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

riscv: dts: starfive: jh7100: Refer to labels from aliases #3

riscv: dts: starfive: jh7100: Refer to labels from aliases #3

Uh oh!

Conversation

geertu commented May 11, 2021

Uh oh!

esmil commented May 11, 2021

Uh oh!

geertu commented May 11, 2021

Uh oh!

esmil commented May 11, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants