openshift · gaurav-nelson · Nov 3, 2017 · Nov 2, 2017
diff --git a/architecture/additional_concepts/storage.adoc b/architecture/additional_concepts/storage.adoc
@@ -356,9 +356,9 @@ ifdef::openshift-dedicated[]
 ====
  * PVs are provisioned with either EBS volumes (AWS) or GCP storage (GCP), depending on where the cluster is provisioned.
  * Only RWO access mode is applicable, since EBS volumes and GCE Persistent Disks cannot be mounted to multiple nodes.
- * *EmptyDir* has the same lifecycle as the pod:
-   ** *EmptyDir* volumes survive container crashes/restarts.
-   ** *EmptyDir* volumes are deleted when the pod is deleted.
+ * *emptyDir* has the same lifecycle as the pod:
+   ** *emptyDir* volumes survive container crashes/restarts.
+   ** *emptyDir* volumes are deleted when the pod is deleted.
 ====
 endif::[]
 
@@ -369,12 +369,12 @@ ifdef::openshift-online[]
  * Only RWO access access mode is applicable, since EBS volumes and GCE Persistent Disks cannot be mounted to to multiple nodes.
  * Docker volumes are disabled.
    ** VOLUME directive without a mapped external volume fails to be instantiated.
- * *EmptyDir* is restricted to 512 Mi per project (group) per node.
+ * *emptyDir* is restricted to 512 Mi per project (group) per node.
    ** If there is a single pod for a project on a particular node, then the pod can consume up to 512 Mi of *emptyDir* storage.
    ** If there are multiple pods for a project on a particular node, then those pods will share the 512 Mi of *emptyDir* storage.
- *  *EmptyDir* has the same lifecycle as the pod:
-   ** *EmptyDir* volumes survive container crashes/restarts.
-   ** *EmptyDir* volumes are deleted when the pod is deleted.
+ *  *emptyDir* has the same lifecycle as the pod:
+   ** *emptyDir* volumes survive container crashes/restarts.
+   ** *emptyDir* volumes are deleted when the pod is deleted.
 ====
 endif::[]
 

diff --git a/creating_images/guidelines.adoc b/creating_images/guidelines.adoc
@@ -243,7 +243,7 @@ ifdef::openshift-online[]
 
 Docker images cannot be built using the `VOLUME` directive in the `DOCKERFILE`.
 Images using a read/write file system need to use persistent volumes or
-`emptydir` volumes instead of local storage. Instead of specifying a volume in
+`emptyDir` volumes instead of local storage. Instead of specifying a volume in
 the Dockerfile, specify a directory for local storage and mount either a
 persistent volume or `emptyDir` volume to that directory when deploying the pod.
 endif::[]

diff --git a/dev_guide/application_lifecycle/new_app.adoc b/dev_guide/application_lifecycle/new_app.adoc
@@ -338,7 +338,7 @@ as input to `new-app`, then an image stream is created for that image as well.
 
 a|`DeploymentConfig`
 a|A `DeploymentConfig` is created either to deploy the output of a build, or a
-specified image. The `new-app` command creates xref:../volumes.adoc#dev-guide-volumes[*EmptyDir*
+specified image. The `new-app` command creates xref:../volumes.adoc#dev-guide-volumes[*emptyDir*
 volumes] for all Docker volumes that are specified in containers included in the
 resulting `DeploymentConfig`.
 

diff --git a/dev_guide/volumes.adoc b/dev_guide/volumes.adoc
@@ -23,14 +23,14 @@ are present, to repair them when possible, {product-title} invokes the `fsck`
 utility prior to the `mount` utility. This occurs when either adding a volume or
 updating an existing volume.
 
-The simplest volume type is `EmptyDir`, which is a temporary directory on a
+The simplest volume type is `emptyDir`, which is a temporary directory on a
 single machine. Administrators may also allow you to request a
 xref:persistent_volumes.adoc#dev-guide-persistent-volumes[persistent volume] that is automatically attached
 to your pods.
 
 [NOTE]
 ====
-`EmptyDir` volume storage may be restricted by a quota based on the pod's
+`emptyDir` volume storage may be restricted by a quota based on the pod's
 FSGroup, if the FSGroup parameter is enabled by your cluster administrator.
 ====
 

diff --git a/getting_started/devpreview_faq.adoc b/getting_started/devpreview_faq.adoc
@@ -63,7 +63,7 @@ Yes, but with a few caveats. For
 https://docs.docker.com/engine/security/security/[security reasons], no images
 that run processes as root are allowed. Additionally, any Dockerfile `VOLUME`
 instruction must be mounted with either a persistent volume claim (PVC) or an
-EmptyDir at this time. See xref:devpreview-current-usage-considerations[more
+emptyDir at this time. See xref:devpreview-current-usage-considerations[more
 considerations].
 
 CAN I RUN PRODUCTION SERVICES ON THE DEVELOPER PREVIEW?::
@@ -143,7 +143,7 @@ limit of 1 GiB each.
 secrets (though some amount of these secrets will be needed by the system's
 build and deployer service accounts).
 * Any Dockerfile `VOLUME` instruction must be mounted with either a persistent
-volume claim (PVC) or an EmptyDir at this time.
+volume claim (PVC) or an emptyDir at this time.
 * The project associated with a user can allocate up to two PVCs of up to 1 GiB each.
 * No images that run as *root* are allowed.
 * Only the Source-to-Image (S2I) build strategy is allowed for any build

diff --git a/install_config/cluster_metrics.adoc b/install_config/cluster_metrics.adoc
@@ -250,7 +250,7 @@ metrics can still survive a container being restarted.
 In order to use non-persistent storage, you must set the
 `openshift_metrics_cassandra_storage_type`
 xref:../install_config/cluster_metrics.adoc#metrics-ansible-variables[variable]
-to `emptydir` in the inventory file.
+to `emptyDir` in the inventory file.
 
 [NOTE]
 ====
@@ -326,7 +326,7 @@ appended to the prefix starting from 1.
 |The persistent volume claim size for each of the Cassandra nodes.
 
 |`openshift_metrics_cassandra_storage_type`
-|Use `emptydir` for ephemeral storage (for testing); `pv` for persistent volumes,
+|Use `emptyDir` for ephemeral storage (for testing); `pv` for persistent volumes,
 which need to be created before the installation; or `dynamic` for dynamic
 persistent volumes.
 

diff --git a/install_config/install/advanced_install.adoc b/install_config/install/advanced_install.adoc
@@ -1445,7 +1445,7 @@ If you alter this variable, ensure the host name is accessible via your router.
 The `openshift_metrics_cassandra_storage_type` variable must be set in order to
 use persistent storage for metrics. If
 `openshift_metrics_cassandra_storage_type` is not set, then cluster metrics data
-is stored in an `EmptyDir` volume, which will be deleted when the Cassandra pod
+is stored in an `emptyDir` volume, which will be deleted when the Cassandra pod
 terminates.
 
 There are three options for enabling cluster metrics storage when using the
@@ -1522,7 +1522,7 @@ openshift_logging_install_logging=true
 
 The `openshift_logging_storage_kind` variable must be set in order to use
 persistent storage for logging. If `openshift_logging_storage_kind` is
-not set, then cluster logging data is stored in an `EmptyDir` volume, which will
+not set, then cluster logging data is stored in an `emptyDir` volume, which will
 be deleted when the Elasticsearch pod terminates.
 
 There are three options for enabling cluster logging storage when using the

diff --git a/release_notes/ose_3_1_release_notes.adoc b/release_notes/ose_3_1_release_notes.adoc
@@ -252,7 +252,7 @@ https://bugzilla.redhat.com/show_bug.cgi?id=1275388[BZ#1275388]:: Previously, so
 https://bugzilla.redhat.com/show_bug.cgi?id=1265187[BZ#1265187]:: When persistent volume claims (PVC) were created from a template, sometimes the same volume would be mounted to multiple PVCs. At the same time, the volume would show that only one PVC was being used. The issue has been fixed.
 https://bugzilla.redhat.com/show_bug.cgi?id=1279308[BZ#1279308]:: Previously, using a etcd storage location other than the default, as defined in the master configuration file, would result in an upgrade fail at the "generate etcd backup" stage. This issue has now been fixed.
 https://bugzilla.redhat.com/show_bug.cgi?id=1276599[BZ#1276599]:: Basic authentication passwords can now contain colons.
-https://bugzilla.redhat.com/show_bug.cgi?id=1279744[BZ#1279744]:: Previously, giving `*EmptyDir*` volumes a different default permission setting and group ownership could affect deploying the *postgresql-92-rhel7* image. The issue has been fixed.
+https://bugzilla.redhat.com/show_bug.cgi?id=1279744[BZ#1279744]:: Previously, giving `*emptyDir*` volumes a different default permission setting and group ownership could affect deploying the *postgresql-92-rhel7* image. The issue has been fixed.
 https://bugzilla.redhat.com/show_bug.cgi?id=1276395[BZ#1276395]:: Previously, an error could occur when trying to perform an HA install using Ansible, due to a problem with SRC files. The issue has been fixed.
 https://bugzilla.redhat.com/show_bug.cgi?id=1267733[BZ#1267733]:: When installing a etcd cluster with hosts with different network interfaces, the install would fail. The issue has been fixed.
 https://bugzilla.redhat.com/show_bug.cgi?id=1274239[BZ#1274239]:: Previously, when changing the default project region from *infra* to *primary*, old route and registry pods are stuck in the terminating stage and could not be deleted, meaning that new route and registry pods could not be deployed. The issue has been fixed.

diff --git a/release_notes/ose_3_2_release_notes.adoc b/release_notes/ose_3_2_release_notes.adoc
@@ -120,7 +120,7 @@ Authentication] for details.
 - The `SETUID` and `SETGID` capabilities have been added back to the *anyuid* SCC,
 which ensures that programs that start as root and then drop to a lower
 permission level will work by default.
-- Quota support has been added for `*emptydir*`. When the quota is enabled on an
+- Quota support has been added for `*emptyDir*`. When the quota is enabled on an
 XFS system, nodes will limit the amount of space any given project can use on a
 node to a fixed upper bound. The quota is tied to the `*FSGroup*` of the
 project. Administrators can control this value by editing the project directly

diff --git a/using_images/other_images/jenkins.adoc b/using_images/other_images/jenkins.adoc
@@ -340,7 +340,7 @@ are already installed.
 $ oc new-app jenkins-persistent
 ----
 
-.. Or an `EmptyDir` type volume (where configuration does not persist across pod restarts):
+.. Or an `emptyDir` type volume (where configuration does not persist across pod restarts):
 ----
 $ oc new-app jenkins-ephemeral
 ----