Fix block sync auto restart not working as expected by yzang2019 · Pull Request #175 · sei-protocol/sei-tendermint

yzang2019 · 2023-12-27T04:42:59Z

Describe your changes and provide context

Problems:

When deciding if we already caught up and should switch to consensus, we might only have one peer that is falling behind by a lot, and at that time we should not switch to consensus because maxPeerHeight is not accurate
Currently Tendermint self remediation will send a restart signal ignoring the restart cooldown time, and cosmos will determine whether it should restart or not based on cooldown time. This lead to Tendermint not able to know whether a restart does actually happen or not.

Solution:

When checking if we caught up or not, we should have at least 2 peers. We should also maintain the previous MaxPeerHeight before auto restart so that after restart, if both peers are bad, we will not immediately switch to consensus
We move the cooldown validation from cosmos to Tendermint

Testing performed to validate your change

Tested in state sync node in testnet

codecov · 2023-12-27T05:04:43Z

Codecov Report

Attention: 6 lines in your changes are missing coverage. Please review.

Comparison is base (016c1b9) 58.02% compared to head (ac74ccf) 58.12%.
Report is 1 commits behind head on main.

❗ Current head ac74ccf differs from pull request most recent head c72fbe0. Consider uploading reports for the commit c72fbe0 to get more accurate results

Additional details and impacted files

@@            Coverage Diff             @@
##             main     #175      +/-   ##
==========================================
+ Coverage   58.02%   58.12%   +0.10%     
==========================================
  Files         249      249              
  Lines       33907    33914       +7     
==========================================
+ Hits        19674    19713      +39     
+ Misses      12666    12637      -29     
+ Partials     1567     1564       -3

Files	Coverage Δ
config/config.go	`62.63% <100.00%> (ø)`
internal/blocksync/pool.go	`79.26% <0.00%> (-1.08%)`	⬇️
internal/blocksync/reactor.go	`51.97% <69.23%> (-1.34%)`	⬇️

... and 13 files with indirect coverage changes

* Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test * [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic * Revert "Add event data to result event (#165)" (#176) This reverts commit 72bb29c. * Fix block sync auto restart not working as expected (#175) * Fix edge case for blocksync (#178) * fix evm pending nonce * fix test * deflake a test * de-flake test * Revert "merge main" This reverts commit 58b9424, reversing changes made to 02d1478. * consider keep-in-cache logic when removing from cache * undo test tweaks --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com>

* Standardize lag status response format (#187) * Standardize lag status response format * Fix flaky unit test * Make ReadMaxTxs atomic (#166) * Support pending transaction in mempool (#169) * fix unconfirmed tx to consider pending txs (#172) * fix pending pop (#173) * add TTL for pending txs (#174) * [EVM] Fix evm pending nonce (#179) * Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test * [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic * Revert "Add event data to result event (#165)" (#176) This reverts commit 72bb29c. * Fix block sync auto restart not working as expected (#175) * Fix edge case for blocksync (#178) * fix evm pending nonce * fix test * deflake a test * de-flake test * Revert "merge main" This reverts commit 58b9424, reversing changes made to 02d1478. * consider keep-in-cache logic when removing from cache * undo test tweaks --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com> * Fix bug when popping pending TXs (#188) * Add mempool metrics for number of pending tx and expired txs (#189) * Add metrics for mempool pending transaction size * Add expired tx count metrics * [EVM] Allow multiple txs from same account in a block (#190) * add mempool prioritization with evm nonce * fix priority stability * index fixes * replace with binary search insert * impl binary search * fix removeTx to push next queued evm tx (#191) * fix expire metric (#193) * [EVM] Fix duplicate evm txs from priority queue (#195) * debug duplicate evm tx * add more logs * add some \ns * more logs * fix swap check * add-lockable-reap-by-gas * add invariant checks * fix invariant parenthesis * fix log * remove invalid invariant * fix nonce ordering pain * handle ordering of insert * fix remove * cleanup * fix imports * cleanup * avoid getTransactionByHash(hash) panic due to index * use Key() to compare instead of pointer * [EVM] prevent duplicate txs from getting inserted (#196) * prevent duplicates in mempool * use timestamp in priority queue * [EVM] Add logging for expiration (#198) * add logging for expired txs * cleanup * [EVM] Avoid returning nil transactions on ForEach (#197) * remove heapIndex to avoid nil scenario * avoid returning nil in loop (mimic Peek) --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: codchen <codchen03@gmail.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com>

* Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test * [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic * Revert "Add event data to result event (#165)" (#176) This reverts commit 72bb29c. * Fix block sync auto restart not working as expected (#175) * Fix edge case for blocksync (#178) * fix evm pending nonce * fix test * deflake a test * de-flake test * Revert "merge main" This reverts commit 58b9424, reversing changes made to 02d1478. * consider keep-in-cache logic when removing from cache * undo test tweaks --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com>

* Make ReadMaxTxs atomic (#166) * Support pending transaction in mempool (#169) * fix unconfirmed tx to consider pending txs (#172) * fix pending pop (#173) * add TTL for pending txs (#174) * [EVM] Fix evm pending nonce (#179) * Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test * [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic * Revert "Add event data to result event (#165)" (#176) This reverts commit 72bb29c. * Fix block sync auto restart not working as expected (#175) * Fix edge case for blocksync (#178) * fix evm pending nonce * fix test * deflake a test * de-flake test * Revert "merge main" This reverts commit 58b9424, reversing changes made to 02d1478. * consider keep-in-cache logic when removing from cache * undo test tweaks --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com> * Fix bug when popping pending TXs (#188) * Add mempool metrics for number of pending tx and expired txs (#189) * Add metrics for mempool pending transaction size * Add expired tx count metrics * [EVM] Allow multiple txs from same account in a block (#190) * add mempool prioritization with evm nonce * fix priority stability * index fixes * replace with binary search insert * impl binary search * fix removeTx to push next queued evm tx (#191) * fix expire metric (#193) * [EVM] Fix duplicate evm txs from priority queue (#195) * debug duplicate evm tx * add more logs * add some \ns * more logs * fix swap check * add-lockable-reap-by-gas * add invariant checks * fix invariant parenthesis * fix log * remove invalid invariant * fix nonce ordering pain * handle ordering of insert * fix remove * cleanup * fix imports * cleanup * avoid getTransactionByHash(hash) panic due to index * use Key() to compare instead of pointer * [EVM] prevent duplicate txs from getting inserted (#196) * prevent duplicates in mempool * use timestamp in priority queue * [EVM] Add logging for expiration (#198) * add logging for expired txs * cleanup * [EVM] Avoid returning nil transactions on ForEach (#197) * remove heapIndex to avoid nil scenario * avoid returning nil in loop (mimic Peek) * call callback from mempool (#200) * separate limit for pending tx (#202) * Add EVM txs eviction logic (#204) * Fix debug log (#205) * EVM transaction replacement (#206) (#208) * Add heapIndex with safety check (#213) * add heapIndex with safety check * cleanup * comment out for perf test * add back perf improvement * fix nil test * Use write-lock in (*TxPriorityQueue).ReapMax funcs (#209) ReapMaxBytesMaxGas and ReapMaxTxs funcs in TxPriorityQueue claim > Transactions returned are not removed from the mempool transaction > store or indexes. However, they use a priority queue to accomplish the claim > Transaction are retrieved in priority order. This is accomplished by popping all items out of the whole heap, and then pushing then back in sequentially. A copy of the heap cannot be obtained otherwise. Both of the mentioned functions use a read-lock (RLock) when doing this. This results in a potential scenario where multiple executions of the ReapMax can be started in parallel, and both would be popping items out of the priority queue. In practice, this can be abused by executing the `unconfirmed_txs` RPC call repeatedly. Based on our observations, running it multiple times per millisecond results in multiple threads picking it up at the same time. Such a scenario can be obtained via the WebSocket interface, and spamming `unconfirmed_txs` calls there. The behavior that happens is a `Panic in WSJSONRPC handler` when a queue item unexpectedly disappears for `mempool.(*TxPriorityQueue).Swap`. (`runtime error: index out of range [0] with length 0`) This can additionally lead to a `CONSENSUS FAILURE!!!` if the race condition occurs for `internal/consensus.(*State).finalizeCommit` when it tries to do `mempool.(*TxPriorityQueue).RemoveTx`, but the ReapMax has already removed all elements from the underlying heap. (`runtime error: index out of range [-1]`) This commit switches the lock type to a write-lock (Lock) to ensure no parallel modifications take place. This commit additionally updates the tests to allow parallel execution of the func calls in testing, as to prevent regressions (in case someone wants to downgrade the locks without considering the implications from the underlying heap usage). --------- Co-authored-by: Valters Jansons <sigv@users.noreply.github.com> * Pending Txs Update Condition (#214) * Add metrics for mempool size changes (#220) * [EVM] Adjust locking for replacement (#224) * Remove tx from cache when canAddPendingTx fails (#230) * add tx hash to evm info proto (#231) --------- Co-authored-by: codchen <codchen03@gmail.com> Co-authored-by: Steven Landers <steven@seinetwork.io> Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com> Co-authored-by: Valters Jansons <sigv@users.noreply.github.com> Co-authored-by: Kartik Bhat <kartikbhatri@gmail.com>

* Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test * [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic * Revert "Add event data to result event (#165)" (#176) This reverts commit 72bb29c. * Fix block sync auto restart not working as expected (#175) * Fix edge case for blocksync (#178) * fix evm pending nonce * fix test * deflake a test * de-flake test * Revert "merge main" This reverts commit 58b9424, reversing changes made to 02d1478. * consider keep-in-cache logic when removing from cache * undo test tweaks --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Co-authored-by: Jeremy Wei <jeremy.t.wei@gmail.com>

* Reduce noisy tendermint logs * Suppress logs for all entering Use peermanager scores for blocksync peers and don't error out on block mismatch (#162) * Use peermanager scores for blocksync peers * Add debug * Randomize * debug * use state to filter * debug * debug * debug * debug * add comments * don't err * revert timeout * Add missing param * Remove flaky test * fix nil * debug * debug * debug * debug --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic Fix block sync auto restart not working as expected (#175) Fix edge case for blocksync (#178) Replay events during restart to avoid tx missing (#211) Add a new config to speed up block sync (#244) * Never switch to consensus due to timeout * Add blocksync peer config to speed up block sync rate * Fix config parsing * Add some logs feat: Exclude unconditional peers when connection limit checking (#245) Improve Peer Score Algorithm (#248) * feat: improve peer scoring algo * debug * debug * more debug * debug TryDiaNext * remove log * fix score type * rever block sync logic * rever block sync logic * rever block sync logic * Add block request log * Add apply block latency * add processEpeerEvent log back * update unit test * update unit test --------- Co-authored-by: yzang2019 <zymfrank@gmail.com>

* Reduce noisy tendermint logs * Suppress logs for all entering Use peermanager scores for blocksync peers and don't error out on block mismatch (#162) * Use peermanager scores for blocksync peers * Add debug * Randomize * debug * use state to filter * debug * debug * debug * debug * add comments * don't err * revert timeout * Add missing param * Remove flaky test * fix nil * debug * debug * debug * debug --------- Co-authored-by: Yiming Zang <50607998+yzang2019@users.noreply.github.com> Perf: Increase buffer size for pubsub server to boost performance (#167) * Increase buffer size for pubsub server * Add more timeout for test failure * Add more timeout * Fix test split scripts * Fix test split * Fix unit test * Unit test * Unit test [P2P] Optimize block pool requester retry and peer pick up logic (#170) * P2P Improvements: Fix block sync reactor and block pool retry logic Fix block sync auto restart not working as expected (#175) Fix edge case for blocksync (#178) Replay events during restart to avoid tx missing (#211) Add a new config to speed up block sync (#244) * Never switch to consensus due to timeout * Add blocksync peer config to speed up block sync rate * Fix config parsing * Add some logs feat: Exclude unconditional peers when connection limit checking (#245) Improve Peer Score Algorithm (#248) * feat: improve peer scoring algo * debug * debug * more debug * debug TryDiaNext * remove log * fix score type * rever block sync logic * rever block sync logic * rever block sync logic * Add block request log * Add apply block latency * add processEpeerEvent log back * update unit test * update unit test --------- Co-authored-by: yzang2019 <zymfrank@gmail.com> Add logs for blocksync Add log to debug replay Fix Fix setBlock true false Add more log for dialing Add more logs Add logs for missing height Fix Fix log Fix log Fix log Fix bpr pool goroutine Fix bpr pool goroutine Fix goroutine leak Fix goroutine leak

Fix block sync auto restart not working as expected

ac74ccf

yzang2019 requested review from philipsu522 and udpatil December 27, 2023 04:53

philipsu522 approved these changes Dec 28, 2023

View reviewed changes

Merge branch 'main' into yzang/SEI-6238

c72fbe0

yzang2019 merged commit 460dc1f into main Dec 28, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix block sync auto restart not working as expected#175

Fix block sync auto restart not working as expected#175
yzang2019 merged 2 commits intomainfrom
yzang/SEI-6238

yzang2019 commented Dec 27, 2023

Uh oh!

codecov bot commented Dec 27, 2023 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

yzang2019 commented Dec 27, 2023

Describe your changes and provide context

Testing performed to validate your change

Uh oh!

codecov bot commented Dec 27, 2023 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Codecov Report

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

codecov bot commented Dec 27, 2023 •

edited

Loading