Native Inserter: Implement block insertion by kean · Pull Request #199 · wordpress-mobile/GutenbergKit

kean · 2025-10-22T18:18:38Z

What?

How?

(see comments)

Testing Instructions

Verify that the selected block is inserted after the currently selected block. If the selected block is an empty paragraph, replace it with a newly created block.
Verify that when you open and close the inserter, it restores the focus

Note: there may be other scenarios I'm not thinking of, including some of the composite blocks like "Gallery" or "Columns". For "Columns", I already opened CMM-880.

Screenshots or screencast

Screen.Recording.2025-10-22.at.9.12.53.AM.mov

kean · 2025-10-22T18:22:43Z

ios/Sources/GutenbergKit/Sources/EditorViewController.swift

+        // Capture the selected block ID before showing the inserter
+        // (the editor will lose focus when the modal appears)
+        Task { @MainActor in
+            let selectedBlockID = await getSelectedBlockID()


The alternative was to memorize the selectedBlockID inside the editor, but I thought it would be more flexible to provide the native side with a capability to get the ID of the currently selected block and a way to insert block at any position.

kean · 2025-10-22T18:29:06Z

src/components/editor-toolbar/index.jsx

-				if ( isInserterOpened ) {
-					setIsInserterOpened( false );
-				}
+			onTouchEnd={ ( e ) => { 


Button with onTouchEnd is what works on mobile without losing focus.

dcalhoun

Thank you for putting this together. It tested relatively well for me. I left a few comments for us to consider. Curious of your thoughts.

src/components/editor-toolbar/index.jsx

src/components/editor/use-host-bridge.js

kean · 2025-10-24T14:01:52Z

I'm putting it back into draft. I've research the existing inserters and they all use the reusable useInsertionPoint and useBlockTypesState methods to determine what blocks to show and how to insert them. We should tap into it. There is no point in merging the intermediate solution.

I will also look into a way to better architect the interaction between web and native. On a high level, I want to create all the requires context by the inserter, including the callbacks, and pass it a a separate JS object to the native side that it could invoke (as opposed to defining these methods on window.editor).

cc @dcalhoun – let me know if it sounds like a plan.

dcalhoun · 2025-10-24T14:07:36Z

@kean overall, that makes sense to me.

On a high level, I want to create all the requires context by the inserter, including the callbacks, and pass it a a separate JS object to the native side that it could invoke (as opposed to defining these methods on window.editor).

Avoiding window.editor is attractive. I do not follow what the replacement would resemble. Could you provide pseudo code to help me understand please?

kean · 2025-10-24T20:30:11Z

I made a significant progress by using useInsertionPoint and useBlockTypesState. With these hooks, the native side doesn't need to know and implement very little.

Scenarios

Top-Level Insertion

Insert a block in empty core/paragraph – the paragraph gets replaced with the selected block ✅
Insert a block in an arbitrary “empty” position in the editor – gets inserted at the selected position ✅
Insert a block when the title is selected - shows an error “Block X can’t be inserted” ⛔️

Composite Blocks

Insert a supported block (core/list-item) in core/list – the list item is added ✅
Insert an unsupported block (core/image) in core/list – gets inserted after the block ✅
Insert a supported block (core/list) in core/quote – gets inserted in the block ✅

Contextual Blocks

Insert a block that supports a subset of child blocks (core/list) and open the inserter – blocks that support this parent (core/list-item) are displayed in a dedicated section at the top ✅
Insert a block that supports a subset of child blocks (core/list) in a composite block (core/quote) and open the inserter – blocks that support this parent (core/list-item) are displayed in a dedicated section at the top ✅

Known Issues

Recording

Screen.Recording.2025-10-24.at.4.24.04.PM.mov

Current Limitations

The main challenges I encountered:

Both useInsertionPoint and useBlockTypesState are private functions that are not exposed even via @wordpress/private-apis. It looks like we'll need to update the core to mitigate it.
Both are hooks, so I had to create an empty React component to use them. I'm not sure if there are any performance implications to it. It seems to re-compute often.

I'll might need some help with it. I'm going to wrap up for today.

Could you provide pseudo code to help me understand please?

I decided to keep to simple. If there is more than one scenario where we need a generalized solution, then maybe it would be a good time to consider it.

kean · 2025-10-27T19:50:00Z

I made a couple of small changes:

Fix CMM-893 ‒ The editor shows an error when you try to insert a block and the title is selected (adding undefined as clientId when no blocks are selected)
Switch on onClick
Rename BlockInserterBridge to NativeBlockInserterButton. It's no longer an empty component. It renders the actual button.

I think it's now in a mergeable state with a caveat that we need to figure out the best way to use private APIs.

I also logged an additional issue: CMM-903: Performance: Inserter recomputes the list of blocks on every change in the editor.

dcalhoun

Works well from my testing. Code looks good too. I left a few suggestions for your consideration.

src/components/native-block-inserter-button/index.jsx

…ismissed

* Add support for block variants * Rename BlockType * Capitlize ID * Update src/components/native-block-inserter-button/index.jsx Co-authored-by: David Calhoun <github@davidcalhoun.me> * Native Inserter: Improve ordering of blocks and more (#206) * Add a note about serializeBlocksForNative * Remove now redundant core/missing check * Move ordering to the JS land * Further refactoring * Pass displayName for Text * Localize categories * Extend most used blocks * Add gbk-most-used as a separate section * Add support for disabling blocks * Collapse long sections * Update the order of embeds * Fix linter errors --------- Co-authored-by: David Calhoun <github@davidcalhoun.me>

kean force-pushed the task/insert-block branch from f5a1435 to a971b45 Compare October 22, 2025 18:20

kean commented Oct 22, 2025

View reviewed changes

kean requested a review from dcalhoun October 22, 2025 18:29

kean force-pushed the task/insert-block branch from d332b04 to e714b40 Compare October 22, 2025 18:30

Base automatically changed from task/show-blocks-in-grid to trunk October 23, 2025 16:53

kean force-pushed the task/insert-block branch from 848d34d to 932ffc4 Compare October 23, 2025 16:58

dcalhoun reviewed Oct 23, 2025

View reviewed changes

src/components/editor-toolbar/index.jsx Outdated Show resolved Hide resolved

src/components/editor/use-host-bridge.js Outdated Show resolved Hide resolved

kean added 2 commits October 27, 2025 14:48

Implement block insertion

c2b1ad0

Load bridge only if enabled

103d411

kean force-pushed the task/insert-block branch from c75dc74 to 103d411 Compare October 27, 2025 19:04

kean added 2 commits October 27, 2025 15:42

Refactor the component that handles insertion

a044ef0

Fix inserter not working when selected from tilte

df8678a

kean requested a review from dcalhoun October 27, 2025 19:50

This was referenced Oct 28, 2025

Native Inserter: Add initial Photos integration #203

Merged

Native Inserter: Fix SVG rendering #205

Merged

Native Inserter: Improve ordering of blocks and more #206

Merged

dcalhoun approved these changes Oct 29, 2025

View reviewed changes

Fix an issue with editor not restoring focus when block inserter is d…

22c363c

…ismissed

kean mentioned this pull request Oct 29, 2025

Tracking: Upstream Gutenberg issues #106

Open

kean and others added 2 commits October 29, 2025 15:19

Fix order of inserts

e172317

kean enabled auto-merge (squash) October 29, 2025 19:23

kean merged commit b2a3304 into trunk Oct 29, 2025
11 checks passed

kean deleted the task/insert-block branch October 29, 2025 19:25

dcalhoun mentioned this pull request Nov 20, 2025

fix: Inline inserter opens native inserter #230

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Native Inserter: Implement block insertion#199

Native Inserter: Implement block insertion#199
kean merged 7 commits intotrunkfrom
task/insert-block

kean commented Oct 22, 2025 •

edited

Loading

Uh oh!

kean Oct 22, 2025

Uh oh!

kean Oct 22, 2025

Uh oh!

dcalhoun left a comment

Uh oh!

Uh oh!

Uh oh!

kean commented Oct 24, 2025 •

edited

Loading

Uh oh!

dcalhoun commented Oct 24, 2025

Uh oh!

kean commented Oct 24, 2025

Uh oh!

kean commented Oct 27, 2025 •

edited

Loading

Uh oh!

dcalhoun left a comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

kean commented Oct 22, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

What?

How?

Testing Instructions

Screenshots or screencast

Uh oh!

kean Oct 22, 2025

Choose a reason for hiding this comment

Uh oh!

kean Oct 22, 2025

Choose a reason for hiding this comment

Uh oh!

dcalhoun left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

kean commented Oct 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

dcalhoun commented Oct 24, 2025

Uh oh!

kean commented Oct 24, 2025

Scenarios

Known Issues

Recording

Current Limitations

Uh oh!

kean commented Oct 27, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

dcalhoun left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

kean commented Oct 22, 2025 •

edited

Loading

kean commented Oct 24, 2025 •

edited

Loading

kean commented Oct 27, 2025 •

edited

Loading